1. Insert the charger plug (8) in the charging socket (10) located on the right side of the
tiller column.
2. Plug the charger power cord (9) into a wall socket (11).
3. When charging is complete, remove the charger power cord (9) from the wall socket
(11) and then remove the charger plug (8) from the charging socket (10).
4. Under ideal storage conditions, batteries that were charged to full capacity and were not
used should be recharged every 6 months.
. If you expect not to use your AFISCOOTER C for an extended period of time, we
recommend charging it for two days and then disconnecting the batteries.
5. If you have not used your AFISCOOTER C for an extended period of time, charge the
batteries for at least 24 hours before driving.
Recommended Charging routine
1. Use the scooter along the day as needed or until charging is low , according to the LCD
battery indicator.
2. At the end of the day, recharge the scooter batteries along the night.
3. No need to disconnect the batteries at the end of the charging. The charger is
Automatic and stops itself.
4. No need to recharge the scooter batteries at the end of every drive, unless you are not
intending to use the scooter any more on that day.
5. In case of recharge the scooter along the day, you should perform full charging.
6. It is not recommended to leave the batteries uncharged for a few days as it can reduce
the travel distance and battery's life.
As long as the charging plug is in the charging socket, the electronic control of
the AFISCOOTER C automatically cuts all power to the electric system and it
cannot be driven.
The charger supplied is suitable for charging lead acid dry/gel batteries. Use
only the defined type of charger. Before using any other type of charger, check
with your dealer.
