782361
126
Verklein
Vergroot
Pagina terug
1/136
Pagina verder
120
SCOOPY+ S - User Manual
What happens then on the network: the Scoopy+ sends the request (INVITE in SIP protocol) to a
proxy server (often the same device is also the registrar). To make things simple, this proxy then relays
and routes the request to its destination. Resolving the SIP URI to a physical network and address
uses mechanisms similar to those used for resolving URLs. Several proxys may be involved in cascade to
finally reach the desired destination, but this does not have to be known or dealt with by the end
devices. The following is like the initiation of a phone call: the IP codec "rings"; if it accepts the call, this
is notified to the Scoopy+.
At this stage, the proxy (s) provide the Scoopy+ and the IP codec with all the address data they need for
the link, then the actual audio streams can be exchanged between both units. As a very important
feature, the end devices now can exchange data directly; the proxies do not have to be on the path,
they are only involved in the setting (and later the ending!) of the session. The codecs will automatically
exchange their coding capabilities, and agree on a coding mode, with no further user intervention.
Alternatively, the call can be done from the station to the reporter, in a way very similar to the above. In
contrast with ISDN links, the operators at the station do not even need to know where the reporter is
located! This is because the registrar deals with this issue.
Note that it is also possible to set a link with a SIP-compliant VoIP phone instead of another codec. This
is one of the numerous advantages of using a standard.
8.2.3. Setting a link without a SIP server
Contrary to a commonplace but wrong idea, the SIP protocol does not impose using a SIP server. The SIP
protocol can be used without a SIP server, i.e. it is possible to set "peer to peer" links without involving
one or more SIP registrars or proxies. In such a case the process is more direct, and the codec contacts
the remote destination with no intermediate entity. However, there are some drawbacks with such type
of session:
Without a registrar, the identification of the destination is its IP address; this is not as "stable"
as a SIP URI, as it may change depending on the location, or time (with dynamic addressing).
The two codecs must have open access to the Internet, or otherwise the link must be made
possible by unlocking if necessary the appropriate routes and ports (conversely, when using a
proxy, such allowances can be restricted to the server connection, for a better control on the
access security).
Most often the gateways perform address translation (NAT), which is an a priori issue for UDP
protocols such as implemented for real time audio links. Proxies can help dealing with this
issue, but without such servers it may be rather difficult to work around such obstacle. The
following chapter provides some recommendations about this.
126

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Aeta Scoopy plus S bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Aeta Scoopy plus S in de taal/talen: Engels als bijlage per email.

De handleiding is 5.56 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info