782361
33
Verklein
Vergroot
Pagina terug
1/136
Pagina verder
SCOOPY+ S - User Manual
27
2.4. Auxiliary transmission functions
The main function of the SCOOPY+ S is the transmission of one or two audio channels, but it also provides
auxiliary functions for transmitting additional data, inside the same stream (or, more generally, the
same session).
Exchange of binary data with the remote codec during transmission: sending and receiving two
Boolean states "INFO1" and "INFO2". On the receiving direction these states are shown on the
front panel, and can close relay contacts (GPO), found on the "EXTENSION" connector of the
SCOOPY+ S. The transmitted states can be set by GPI contacts on this same connector, or
alternatively by keys on the front panel. A typical application is the transmission of an "On Air"
signal. See operation details in 3.2.1 and 4.4.7. This feature is not available through a mobile
voice link.
Exchange of additional "INFOn" states, up to 4 signals. Using these is possible if complementing
the SCOOPY+ S with a GPIO extension box, available as an accessory. This box provides 4 GPIO
isolated inputs and outputs. See operation details in 4.4.7. Only an IP network (Ethernet or
mobile) can support such additional transmission.
Receiving SMS from the mobile network, available when the "HD-4G Mobile" option is installed
and as soon as the unit is registered on a mobile network. The PIN code of the SIM card must be
entered beforehand. When receiving an SMS (sent to the SIM card's subscriber number), the
message is displayed directly on the front panel, and it can be read as well from a page of the
embedded html server of the unit. This function is independent from the transmission link(s).
"In-band" exchange of information ("RC data" in the table below): this function allows a remote
unit to remote control the SCOOPY+ S via a running ISDN link. This control mode uses the
dedicated AARC protocol. This additional transmission exists only over ISDN and excludes
INFO1/INFO2 exchanges).
These various features are only compatible with AETA products, because they are not inside the
scope of independent standards. Besides, for using them they must be activated on the remote unit
as well.
The availability of these functions depends mainly on the transmission network. The following table
summarizes the capabilities.
Table 5 Auxiliary functions depending on the network used
Besides, over ISDN links auxiliary data transmission is only available for the following coding algorithms:
G722-H242
MPEG Layer 2 with J52
4SB ADPCM
INFO1 / INFO2 INFO3 to INFO6
ISDN
IP
POTS
Mobile voice
Network
Transmission
SMS
RC
data
33

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Aeta Scoopy plus S bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Aeta Scoopy plus S in de taal/talen: Engels als bijlage per email.

De handleiding is 5.56 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info