782361
22
Verklein
Vergroot
Pagina terug
1/136
Pagina verder
16
SCOOPY+ S - User Manual
2.2.1. G711 coding
Application: telephony, coordination. Low latency.
G711 is the standard coding used for voice transmission on public telephone networks, and features 300
to 3400 Hz audio bandwidth. This algorithm is typically used for links over IP networks with IP
telephones or VoIP gateways. Via ISDN, G711 is used for links with telephones or hybrid devices.
G711 is available only for IP or ISDN transmission
2.2.2. Mobile telephony coding: GSM , AMR
Application: telephony, mobile coordination. Moderate latency.
These algorithms are exclusively used for speech transmission over mobile telephone networks, with a
300 to 3400 Hz audio bandwidth. Gateways perform, whenever needed, transcoding in order to
interface with fixed PSTN, ISDN and IP networks.
2.2.3. Mobile HD Voice coding: AMR-WB
Application: commentaries, mobile coordination. Moderate latency.
The AMR-WB coding (standardised as G722.2 by the ITU-T) is used between compatible mobile
terminals, when the mobile network supports the so called "HD Voice" service, and provides speech
transmission with a 50-7000 Hz bandwidth.
SCOOPY+ S automatically implements this algorithm in mobile voice mode every time it is possible, and
automatically falls back to standard voice coding if not (when network does not support, or the remote
terminal is not compatible).
Unfortunately it is not possible to see directly whether AMR-WB is active or not at a given moment.
You have to rely on your listening skills! However, it has to be active if the conditions are met: a)
support from the network on both sides of the link, b) both terminals compatible, c) service
continuity from end to end1
2.2.4. CELP coding
Application: commentaries, coordination. Low capacity transmission channels
This algorithm operates in mono for a net nominal bit rate of 24 kbit/s, and provides 7 kHz bandwidth
and a quality close to G722 for a much lower bit rate.
CELP is available for IP or PSTN networks. For PSTN (POTS), the bit rate may be reduced to adapt for the
line quality, among the following values: 12 kbit/s, 14.4 kbit/s, 16.8 kbit/s, 19.2 kbit/s, 21.6 kbit/s,
24 kbit/s. The bandwidth is reduced accordingly.
Still for POTS lines, in addition to the normal mode two "protected modes" are available, bringing an
increased resistance to transmission problems, however with an increased latency as well.
1 At the time of writing, this requires both units to be on the same network: same operator, same country
22

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Aeta Scoopy plus S bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Aeta Scoopy plus S in de taal/talen: Engels als bijlage per email.

De handleiding is 5.56 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info