587610
67
Verklein
Vergroot
Pagina terug
1/184
Pagina verder
67
EN
IMDCFJ. 12.05 6343841_03
Setting supplementary electric heater setpoint
Index - String
MIN
value
MAX
value
Parameter function
0°C 65°C
This parameter indicates the deviation from the heating setpoint, for switching off the electric heater (if
active) in supplementary mode; as shown in Fig.12 on the previous page (Parameter Sri).
Setting electric heater band in supplementary/replacement mode
Index - String
MIN
value
MAX
value
Parameter function
0°C 20°C
In supplementary mode, the temperature of the water in the system is checked before the unit is
switched on. If the temperature is less than/equal to the value calculated for the switch-on band, the
electric heater will be switched on and will operate as per the diagram on the previous page Fig.12.
The value of the switch-on band is calculated as follows: switch-on band = (Heating setpoint) -
(Parameter Sri) - (Parameter Bri); see Fig.12 on previous page;
In replacement mode, this parameter represents the band of deviation from the heating setpoint, within
which the heater will be activated or deactivated, as shown on the previous page Fig.13.
Setting outside air temperature threshold for supplementary mode
Index - String
MIN
value
MAX
value
Parameter function
-40°C 50°C
This parameter indicates the outside air temperature threshold, beneath which the heater is activated in
supplementary mode; as shown on the previous page, in Fig.11 Parameter tA1.
Setting outside air temperature threshold for replacement mode
Index - String
MIN
value
MAX
value
Parameter function
-40°C 50°C
This parameter indicates the outside air temperature threshold, beneath which the heater is activated in
replacement mode; as shown on the previous page, in [Fig.A] Parameter tA2.
Setting the band for air temperature
Index - String
MIN
value
MAX
value
Parameter function
0°C 20°C
This parameter indicates the band applied to the air temperature setpoints (tA1-tA2).
Parameters only visible in model set for
hot water production
Parameters only visible in models set for
hot domestic water production
Parameters only visible in the models with DCP installed
Parameters only visible in bicompressor models
Parameters only visible in the models with inverter compressor
67

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Aermec MODUCONTROL bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Aermec MODUCONTROL in de taal/talen: Duits, Engels, Frans, Italiaans, Spaans als bijlage per email.

De handleiding is 3,21 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info