587610
54
Verklein
Vergroot
Pagina terug
1/184
Pagina verder
54
EN
IMDCFJ. 12.05 6343841_03
Setting of proportional cooling band
Index - String
MIN
value
MAX
value
Parameter function
1 °C 20 °C
This parameter indicates the proportional band applied to the cooling set; this band produces the opti-
mised management of the compressor, only switching it on if the inlet/outlet water temperature (depen-
ding on the type of control set by parameter (0) in the installer menu) is greater than the cooling work
set (parameter (1) user menu) plus the value of this parameter.
Setting of proportional heating band
Index - String
MIN
value
MAX
value
Parameter function
1 °C 20 °C
This parameter indicates the proportional band applied to the heating set; this band produ-
ces the optimised management of the compressor, only switching it on if the inlet/outlet water
temperature (depending on the type of control set by parameter (0) in the installer menu) is
less than the heating work set (parameter (3) user menu), minus the value of this parameter.
In cooling only units, this parameter is displayed but it cannot be modified.
Settings made on the basis of outside temperature
Index - String
MIN
value
MAX
value
Parameter function
03
This setting activates the algorithm of compensation of the work setting:
(°C)
(°C)
SET (F)
SET (H)
SET (G) SET (I)
In cooling mode, the work setting is cal-
culated automatically on the basis of the
outside temperature, following the logic
highlighted in the diagram.
(°C)
(°C)
SET (J)
SET (N)
SET (L) SET (O)
In heating mode, the work setting is cal-
culated automatically on the basis of the
outside temperature, following the logic
highlighted in the diagram.
SF1
SF2
TF1 TF2
SC1
SC2
TC1 TC2
SF1: index (6) user menu;
SF2: index (8) user menu;
TF1: index (7) user menu;
TF2: index (9) user menu;
SC1: index (A) user menu;
SC2: index (C) user menu;
TC1: index (B) user menu;
TC2: index (d) user menu;
Parameter visible ONLY on units suitable for the production
of hot water
Parameter visible ONLY on units suitable for the production
of DHW
Parameter visible ONLY on units with condensation control
device on board
Parameter ONLY visible on units fitted with twin compressor
Parameter ONLY visible on units fitted with inverter com-
pressor
Setting heating mode temperature set
Index - string
Value
MIN
Value
MAX
Parameter function
25 °C (*)
This parameter indicates the active work set value in the heating mode. This
parameter is displayed in the cooling only units but cannot be modified.
(*):
- the maximum limit can be configured via the parameter (t) of the installer menu;
- if the parameter (8) of the installer menu is set at 4, the maximum limit becomes
70°C in order to allow insertion of a set-point for boiler adjustment;
54

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Aermec MODUCONTROL bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Aermec MODUCONTROL in de taal/talen: Duits, Engels, Frans, Italiaans, Spaans als bijlage per email.

De handleiding is 3,21 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info