587628
36
Verklein
Vergroot
Pagina terug
1/118
Pagina verder
36
English
IFCW3LJ 1210 - 5375700_01
LIQUID CRYSTAL DISPLAY
With the remote control on (ON), the display shows the settings of the unit, with the remote control off (OFF) the display is off
and only displays the timer for the programmed activation (if active).
1 - OPERATING MODE
Shows the operating mode:
AUTO automatic
FAN ventilation
COOL cooling
DRY dehumidification
HEAT heating
2 - FAN SPEED
Display of the three fan speeds and the automatic speed control:
AUTO automatic speed control
HIGH high speed
MED medium speed
LOW low speed
3 - HORIZONTAL BLADE POSITION
Displays the four fixed positions of the horizontal blades and oper-
ation with the blades moving.
4 - KEY LOCK
Shows the key lock function is activate.
5 - SLEEP PROGRAMME
Shows the night comfort function SLEEP is active.
6 - TEMPERATURE (°C) OR (°F)
Displays the set point temperature value in °C or °F.
7 - TIMER
Indicates that the timer programmed on or off function has been activated.
8 - TRANSMISSION INDICATOR
Appears every time a button is pushed and it indicates the transmission of the signal.
PREPARATION OF THE REMOTE CONTROL
Open the battery cover by pressing slightly in the direction of the arrow.
Insert two 1.5 Volt high-performance alkaline batteries LR 03 (AAA), being careful not invert the polarity.
Close the battery cover.
IMPORTANT
The two control types, wired control panel and remote control, cannot be used at the same time on the same fan coil unit.
The batteries have an average life of 10 months when used normally.
The two batteries must be identical and must be changed at the same time.
– Remove the batteries from the remote control unit if you envisage the units not being used for long periods.
When the remote control only works near the fan coil unit, it is time to replace the batteries.
Do not fix the remote control bracket near a source of heat or in direct sunlight. Avoid exposing the remote control to exces-
sive humidity or knocks (it might break, become deformed, or lose its colour ).
Do not place the remote control near electronic equipment because it could interfere with the unit's proper operation.
USE OF THE REMOTE CONTROL
Point the remote control transmitter towards the fan coil receiver while the settings
are being programmed.
To be able to carry out any operation or change of the settings from the remote con-
trol, the unit must be powered.
When a signal is received correctly by the FCW it will emit a beep. If you do not
hear the sound, press the remote control button again.
Obstacles must not be placed between the transmitter and the receiver (e.g. furniture
or curtains) to ensure proper operation.
The remote control is able to transmit effectively up to 7 metres from the fan coil unit
receiver.
36

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Aermec FCW 41VLN bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Aermec FCW 41VLN in de taal/talen: Duits, Engels, Frans, Italiaans, Spaans als bijlage per email.

De handleiding is 17,02 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info