618082
14
Verklein
Vergroot
Pagina terug
1/36
Pagina verder
14
F11 OPERATING MANUAL
© 2002 Design, 2013 Doc. No. 12-7285-r01 (5/3/13)
SURFACE MODE
Surface Main is the default screen displayed while in FREE Mode. In addition to Surface Interval Time and Dive Number, a CDT
(Countdown Timer) is displayed (unless it is set Off) which you can start, stop, and reset.
Like Watch mode, you can access a sequence of selections including >>
ALTs (additional data), Countdown Timer, Set Alarms, Set Utilities, Serial Number, and Chronograph.
The CDT is separate from the one featured in Watch Mode.
The Chronograph is the same one as Watch Mode with it's operations carrying over between the two modes.
Button operations >>
A (< 2 sec) - to step forward through the sequence of selections.
M (< 2 sec) - to step back through selections.
M (2 sec, any time) - to revert to Surface Main.
No button action (2 min) - revert to Surface Main.
L - to activate the Backlight.
Descent to the DSD (Dive Start Depth) set for 1 second will activate Dive Mode, which will be displayed in the background if the
Chrono is on display.
Setting the DSD (for 2, 4, or 6 FT; or 0.6, 1.2, or 1.8 M) is explained later in the Set Utilities section.
Upon ascent to 2 FT (0.6 M) for 1 second, the Dive Main will remain on display until the BDSI (Between Dive Surface Interval) time
set elapses then the Surface Main will be displayed.
Setting the BDSI (up to 1 minute) is explained later in the Set Utilities section.
When set On, the SRT (Surface Recovery Time) alarm will sound and flash a message when the Surface Interval after surfacing
reaches the time set.
Setting the SRT alarm (up to 30 minutes) is explained later in the Set Alarms section.
When 2 hours elapse after surfacing, operation will revert to Watch Mode. M (2 sec) will access or return from Watch Mode.
SURF MAIN, information includes (Fig. 21A/B):
> Graphic FREE, or CDT (min:sec) with icons.
> Surface Interval Time (hr:min_sec) with SURF and sec icons.
> Number of the last dive conducted that calendar day with DIVE icon. If no dive has been made yet that day, or if Dive # is
reset by A+S (2 sec), 0 will be displayed.
> Battery icon, if a Low Battery condition.
A (< 2 sec) to access SURF ALT 1, and step forward through the sequence of selections.
A (2 sec) to access Log/History.
A + S (2 sec) to reset Dive # to 0.
M (< 2 sec) to access Chrono Lead-in, and step back through the group sequence.
M (2 sec) to access Watch Main.
S (< 2 sec) to start*/stop CDT. *
When the CDT is set for Auto, it will reset and repeat the countdown when it reaches 0:00.
S (2 sec) to reset the CDT to the time set.
L (< 2 sec) - to toggle the Backlight On/Off.
Will be On for the duration time set.
L (2 sec), while the Backlight is On, - to reset the timer to keep it On for the full duration time set.
SURF ALT 1, information includes (Fig. 22):
> Graphic LAST, indicating data is from the last dive.
> Max Depth with MAX and FT (or M) icons.
Dashes if no previous dive conducted.
> Elapsed Dive Time (min:sec) with DIVE and min_sec icons.
Dashes if no previous dive conducted.
A (< 2 sec) - to step forward to ALT 2.
M (< 2 sec) - to step back to SURF MAIN.
Reverts to Main in 10 seconds if A or M is not pressed.
L (< 2 sec) - to toggle the Backlight On/Off.
Will be On for the duration time set.
L (2 sec), while the Backlight is On, - to reset the timer to keep it On for the full duration time set.
SURF ALT 2, information includes (Fig. 23):
> Day of Week graphic.
> Time of Day (hr:min_sec) with AM (or PM) icon if 12 Hour Format, no icon if 24 Hour.
> Temperature with °F (or °C).
A (< 2 sec) - to step forward to CDT.
M (< 2 sec) - to step back to ALT 1.
Reverts to Main in 10 seconds if A or M is not pressed.
L (< 2 sec) - to toggle the Backlight On/Off.
Will be On for the duration time set.
L (2 sec), while the Backlight is On, - to reset the timer to keep it On for the full duration time set.
Fig. 21A - SURF MAIN
(no dive yet, CDT Off)
Fig. 21B - SURF MAIN
(CDT running)
Fig. 22 - SURF ALT 1
Fig. 23 - SURF ALT 2
14

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Aeris F11 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Aeris F11 in de taal/talen: Engels als bijlage per email.

De handleiding is 7,2 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info