Handleiding Aeris A300 AI (pagina 42 van 52) (Engels)

618070

Verklein

Vergroot

Pagina terug

1/52

Pagina verder

A300 AI OPERATING MANUAL

CARE AND CLEANING

Protect your A300 AI from shock, excessive temperatures, exposure to chemicals, and tampering. Protect the lens against

scratches with a Instrument Lens Protector. Small scratches will naturally disappear underwater.

• Soak and rinse the A300 AI in fresh water at the end of each day of diving, and check to ensure that the areas around the

openings leading to the Low Pressure (Depth) Sensor (Fig. 105a), PC Data Port (Fig. 105b), and Buttons are free of debris or

obstructions.

• To dissolve salt crystals, soak in lukewarm water or a slightly acidic bath (50% white vinegar/50% fresh water). After

removal from the bath, place the A300 AI under gently running fresh water and towel dry before storing.

• Transport your A300 AI cool, dry, and protected.

INSPECTIONS AND SERVICE

Your A300 AI should be inspected annually by an Authorized AERIS Dealer who will perform a factory prescribed function check

and inspection for damage or wear. To keep the 2 year limited warranty in effect, this inspection must be completed one year

after purchase (+/- 30 days).

AERIS recommends that you continue to have an inspection performed every year to ensure it is working properly. The costs of

annual inspections are not covered under the terms of the 2 year limited warranty.

To Obtain Service:

Take your A300 AI to an Authorized AERIS Dealer.

To return your A300 AI to AERIS:

• Record all data in the Log or download the data in memory to a PC. All data will be erased during factory service.

• Package it using a protective cushioning material.

• Include a legible note stating the speciﬁc reason for return, your name, address, daytime phone number, serial number, and

a copy of your original sales receipt and Warranty Registration Card.

• Send freight prepaid and insured using a traceable method to AERIS.

• If shipping to AERIS, obtain an RA (Return Authorization) number by contacting AERIS Customer Service at 510/546-0010

or send an email to info2@diveaeris.com.

• Non warranty service must be prepaid. COD is not accepted.

• Additional information is available at the AERIS web site >>>>

diveaeris.com

BATTERY REPLACEMENT

The procedures that follow must be closely adhered to to avoid entrance of water into the unit. Dam-

age due to improper Battery replacement (or subsequent leakage of moisture into the unit) is not

covered by the A300 AI's 2 year warranty.

The Battery Compartment should only be opened in a dry and clean environment with extreme care taken to prevent the entrance

of moisture or dust.

As an additional precautionary measure to prevent formation of moisture in the Battery Compartment, it is recommended that the

Battery be changed in an environment equivalent to the local outdoor temperature and humidity (e.g., do not change the Battery

in an air conditioned environment then take it outside during a hot sunny day).

Inspect the Buttons, Lens, and Housing to ensure they are not cracked or damaged. If there is any sign of moisture inside the unit,

DO NOT attempt to use it for diving until it receives proper service by the AERIS factory.

Data Retention

When the battery is removed, settings* and calculations for repetitive dives are retained in volatile memory until a new battery is

installed. You will have the choice of saving or deleting the data (see page 43).

*Date will have to be set and Time may require adjustment for the time duration that the battery remains out of the unit.

Battery Cover Removal

• Locate the Battery Compartment on the back of the module.

• While applying steady inward pressure on the clear Battery Cover, rotate the Cover Ring clockwise 10 degrees by pressing

on the upper/right arm of the Ring with a small blade screwdriver (Fig. 106).

If available, an adjustable face spanner tool or pointed pliers can be used by inserting the tips of the tool in the small holes

in the Ring, then leveraging it clockwise (Fig. 107).

• Lift the Cover Ring up and away from the Housing.

• Remove the clear Battery Cover.

The Cover O-ring may come off with it.

Fig. 105 - CASE BACK

Fig. 107 - COVER REMOVAL

(using spanner tool)

Fig. 106 - COVER REMOVAL

(using screwdriver)

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

lees eerst de handleiding door;
controleer of uw vraag al eerder door iemand anders is gesteld;
probeer uw vraag zo duidelijk mogelijk te stellen;
heeft u een probleem en al geprobeerd om dit op te lossen, vermeld dit erbij aub;
heeft u een oplossing gekregen van een bezoeker dan horen wij dat graag in dit forum;
wilt u een reactie geven op een vraag of antwoord, gebruik dan niet dit formulier maar klik op de knop 'reageer op deze vraag';
uw vraag wordt direct op de website gezet; vermijd daarom persoonlijke gegevens in te vullen;

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Aeris A300 AI Handleiding

Hulp nodig? Stel uw vraag in het forum

Misbruik melden

Product:

Spelregels forum

Abonneren

Ontvang uw handleiding per email

Stel vragen via chat aan uw handleiding

Uw handleiding is per email verstuurd. Controleer uw email

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

U heeft geen emailadres opgegeven

Uw vraag is op deze pagina toegevoegd

Info