361847
34
Verklein
Vergroot
Pagina terug
1/100
Pagina verder
g
34
4.2 Selecting the Cup Measure
0 Repeatedly press the "Cup Measure"
key (Fig. 3, d) until the desired cup
symbol is indicated.
The cup measures are indicated as fol-
lows:
Espresso cup
Coffee cup
Coffee mug
The coffee machine is factory-set to
standard measures.
3
Notes on changing the cup measures
can be found in „Changing and Saving
the Cup Measure" Page 35.
4.3 Dispensing Coffee
Refer to „Dispensing Coffee" Page 33.
5 Frothing Milk
The steam can be used to froth milk
and to heat liquids. Since a higher
temperature is needed to produce
steam than to make coffee, the coffee
machine has an additional steam
mode.
3
To make a cappuccino, fill a large cup
1/2 to 2/3 full with espresso, and then
add the frothed milk.
1
Caution! Danger of scalding when the
steam nozzle is activated! Hot water or
steam output can cause scalding. Do
not activate the steam nozzle until it is
immersed in the milk.
0 To produce steam, press the "Steam
Pre-selector" key (Fig. 3, g) . The
indicator illuminates, and at the same
time, the "Coffee machine heating"
indicator (Fig. 3, i) flashes. When the
heating process is finished, this indica-
tor changes from flashing to con-
stantly on. The coffee machine is now
ready for frothing milk.
3
If the steam function is left unused for
more than 1 minute, the coffee
machine automatically changes back
to coffee-making mode.
0 Pour approximately 100 ml cold,
skimmed or semi-skimmed milk into a
small, narrow jug (max. 0.5 l capacity).
This must be small enough to fit under
the steam nozzle.
3
The milk should be cold. You should
also use a cold jug, and not rinse this
with hot water.
0 Swivel the steam nozzle out and hold
the jug under the steam nozzle so that
the end is completely immersed in the
milk. Turn the Selection dial for steam
and hot water (Fig. 1, D) to the
position (Fig. 17). The milk is now
frothed up.
3
Hold the jug steady duing the frothing
process. The nozzle should not be
allowed to touch the bottom of the
jug, since this would prevent the steam
escaping. Froth the milk until the vol-
ume has at least doubled.
0 To stop frothing, turn the Selection dial
for steam and hot water (Fig. 1, D) to
the position and remove the jug
(Fig. 17).
1
Caution! Danger of scalding from hot
milk spray! Switch the steam off,
before removing the jug with the
frothed milk.
0 To finish steam mode, press the "Steam
Pre-selector" key (Fig. 3, g) . The
indicator goes out.
The coffee machine is now ready for
making coffee again.
0 Each time you have frothed milk, let
off some hot water through the nozzle
for a short time by setting the Selec-
tion dial for steam and hot water (Fig.
1, D) to the position. This is nec-
essary to prevent milk residues drying
inside the nozzle, and thereby blocking
it. Use a suitable container to catch the
water.
0 Remove the frothing aid after each use
(Fig. 18) and flush the milk residues
away under running water. Wipe the
steam nozzle off with a damp cloth.
34

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Aeg-electrolux cf 260 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Aeg-electrolux cf 260 in de taal/talen: Nederlands, Duits, Engels, Portugees, Spaans als bijlage per email.

De handleiding is 4,32 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info