618535
253
Verklein
Vergroot
Pagina terug
1/341
Pagina verder
248
Typography
Last updated 6/15/2014
Before tsume (left), and after tsume (right)
1 Select the text to which you want to apply tsume.
2 Input the percentage in Tsume in the Character panel or the Control panel.
You can also check which tsume or tracking was applied for each character by highlighting the affected text.
Using grid tracking to adjust character spacing
One way in which you can compress aki between characters is to specify the line spacing for the frame grid itself and
adjusting tracking for placed text. This is a form of character compression that uses a feature called Adjust Tracking
With CJK Grid in the Character panel menu or the Control panel (also called grid tracking).
Some characters in CJK fonts are smaller than the embox, resulting in a large aki between characters when they are
placed on the frame grid. Setting tsume in this way for the grid itself is convenient because it allows mojikumi where
characters are properly aligned in the grid. This setting can also be saved as a grid format.
The Character Aki default in the Frame Grid Settings dialog box is set to “0. In automated typography, this tracking is
known as “Beta”. Setting this to a negative value for mojikumi causes the right grid to overlap the left grid in accordance
with the set value. Characters input to the grid will be aligned on the basis of the center of the each grid, so the spacing
for each character will be compressed. In addition, depending on the mojikumi settings, character forms adjusted to
less than the maximum width will change on the basis of the value proportion of Line Spacing Tsume. For instance,
when mojikumi is set to half spacing for yakumono such as parentheses, by setting the Character Aki in the grid to -1H,
yakumono will be compressed to half of -1H, thus -0.5H. However, because character spacings based on tracking in this
grid are not applied to Roman text, character spacing for Roman text will not be compressed in line with tracking. In
addition, because this tracking value is applied to the grid itself, it is handled as an absolute value. For this reason, even
if the text font size changes, the tracking value does not.
This feature is enabled by default. To disable this feature, select Adjust Tracking With CJK Grid from the Character
panel menu or Control panel, and deselect the box to the left of the item name.
Adjust tracking by using Grid Jidori
You can justify text for specified grid characters by setting grid jidori. For example, if you select 3 characters entered
and set jidori to 5, the 3 characters will be spread evenly across the grid for 5 character spaces.
1 Select a range of characters.
2 In Grid Jidori in the Character panel or Control panel, enter a value in the text box or select one from the pop-up
menu.
Note: Use the Grid Jidori feature in the frame grid. It may not function properly in a text frame.
253

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Adobe InCopy CC - 2014 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Adobe InCopy CC - 2014 in de taal/talen: Engels als bijlage per email.

De handleiding is 9,27 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Adobe InCopy CC - 2014

Adobe InCopy CC - 2014 Gebruiksaanwijzing - Nederlands - 306 pagina's

Adobe InCopy CC - 2014 Gebruiksaanwijzing - Deutsch - 315 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info