97028
180
Verklein
Vergroot
Pagina terug
1/199
Pagina verder
ENCORE CS3
User Guide
176
DVD Image Or Blu-ray Image Builds a Blu-ray or DVD image on your hard drive. The image is typically used for
local replication by using a third-party mastering application.
DVD Master Writes to a digital linear tape (DLT) used for mass replication of DVDs. Creating a DVD master
requires having a DLT drive connected to your computer. Building a master creates a DDP (Disc Description
Protocol) report, which replication facilities might require.
Note: The Master output option is not available for Blu-ray discs.
5 Specify the source (such as the current project), the destination (such as the disc recorder drive), and any other
appropriate settings. The settings are different depending on the Output option you choose.
6 Click Build.
7 Save the project if prompted.
8 If you have any problems in your project, you are prompted to manage them or ignore them. Adobe recommends
that you fix all problems, and then click Build again.
9 When writing is complete, click OK.
Blu-ray and DVD build settings
The Build panel includes three sections—Source, Destination, and Disc Info—that are common to Blu-ray and DVD
formats. Additional sections for DVD Settings include DVD-ROM Content, Region Codes, and Copy Protection.
The options in these sections vary, depending on the format and type of output you choose:
Source Specifies which project to use for the build:
Create Using The current project appears by default if you are building your working project. Other options
include DVD Volume, to specify a DVD project youve already built to a folder; and Disc Image, to specify a Blu-ray
or DVD project you’ve built to an image file on your hard drive. Click Browse to locate and specify the project.
Destination Specifies where to write your project:
Location For output to Folder or Image, specifies the destination for your build folder or disc image. Click Browse
to specify the location.
Recorder For output to Disc or DVD Master, specifies the disc writer or DLT drive to which the project is sent for
burning. Click Refresh to scan your hardware for additional recorders.
Test Before Writing Tests the recorder, not the project, before burning the disc. To test the project, see “Check a
project” on page 172.
Write Speed Specifies how fast the selected recorder writes to the disc. Encore displays the maximum speed of
the drive you selected. You can select a lower speed.
Number Of Copies Type the number of discs to burn. If you choose to burn multiple copies, Encore prompts you
to insert new discs when needed.
Auto-Erase Re-Writable Discs Erases rewritable discs that already contain data before the program writes the new
data. Selecting this option bypasses the alert message that normally appears later in the process.
Disc Info Displays the amounts of free and used disc space for the current project. (For more information, see
Check the space remaining on your disc” on page 28.)
For Blu-ray Disc image output, Disc Info also includes the following Image Type options:
BD-R Image Type Write-once, recordable format for high-definition TV recording and computer data storage
BD-RE Image Type Re-writable format for high-definition TV recording and computer data storage
180

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Adobe Encore CS3 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Adobe Encore CS3 in de taal/talen: Engels als bijlage per email.

De handleiding is 14,34 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info