800094
4
Verklein
Vergroot
Pagina terug
1/76
Pagina verder
4
10. Do not use the device on clothes you are wearing, always take them off. This may
cause personal injury or damage to the lint remover.
11. The device has a protective lock. It will not function unless the blade cover is refitted.
12. Take care not to use the device on buttons, zips, appliqués, patches, stickers, labels,
rips, seams, and seams.
13. Do not use the device on silk, wool, or linen garments. This can damage fabrics and
damage the shaver blades.
14. Do not use the device near water, e.g. in the shower, bathtub, or over a wash basin
with water.
15. Do not allow the device to get wet. Before using the appliance again, it must be
checked by a qualified electrician.
9. Do not press the device into the fabric as this may damage the fabric.
16. Do not handle the device with wet hands.
11. Cleaning brush 12. USB charging cable
5. USB type C charging port 6. Blade Cover
1. Battery level indicator 2. Battery charging indicator
9. Bin for knots and pilling 10. Housing
17. The device should be turned off each time it is put away.
Device description:
3. Working speed indicator 4. Button for changing the working speed / ON OFF power
7. Blades 8. Rotary shaft
BATTERY CHARGING:
When the battery is fully charged, the battery level indicator will show 100%. The time to fully charge the battery is 2-3 hours. When fully
charged, the run time is approximately 120 minutes, depending on the selected speed.
1. Place the garment (fabric) on a flat surface, and smooth out the wrinkles.
When connected to power, the battery charge indicator (2) will illuminate and the battery charge indicator (1) will display the current
battery charge.
USING THE DEVICE
2. Switch on the device by pressing the button (4), the device has three speeds. To increase the speed, press button (4) again. Available
speeds: 6500, 7500, 8500 rpm
4. Stubborn knots can be removed by moving the device across and then along ("checkered") on one small piece of clothing.
5. Thin garments can be defrosted by placing them on flat, rigid cardboard.
3. Move the device back and forth across the material.
6. For fabrics with a pattern, move the device in the direction of the pattern.
CLEANING
The device should not be used while charging.
1. Switch off the device by pressing the button (4).
To start charging, plug the charging cable (12) into the charging socket (5) and then connect it to the power supply.
6. After cleaning, reassemble all the disassembled parts.
5. Empty the knots and lint container (9).
The device has a protective lock. It will not function unless the blade cover (6) is refitted.
Power: 5W
Power supply: USB 5V/1A
3. Remove the blades (7) by pulling them upwards (Caution! The blades are very sharp!).
TECHNICAL DATA:
2. Unscrew the blade protection cover (6) counter clockwise.
4. Clean the blade cover (6), the blades (7), and the rotating shaft (8) with the included brush (11).
4

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Adler AD 9617 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Adler AD 9617 in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Portugees, Spaans, Pools, Deens, Zweeds als bijlage per email.

De handleiding is 4.35 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info