725553
4
Verklein
Vergroot
Pagina terug
1/54
Pagina verder
4. Carrying handle (on both sides) 5. Mesh filter 6. 2 plastic boxes with gel to frozen
22. The device can be used only with properly working ventilation.
7. Water tank 8. LED Touch control panel 9. Remote Control
10. Mesh filer’s frame
20. Do not move the device when the inner tank is filled with water.
21. Do not place any objects on the device.
DEVICE DESCRIPTION (Fig. A).
1. Air outlet opening 2. Water level indicator 3. Wheels
7. The TIMER button allows for programming the amount of time during which the device will operate before turning itself off
automatically (if the TIMER function is not used, the device will work until it is manually turned off). Time range 1 – 12 hours.
4. The SPEED button on the control panel allows you to change the speed of the blower unit. The following speeds can be selected:
HIGH (fast), MIDDLE (medium) and LOW (slow).
5. COOL button lowers the temperature of the air by running the water pump. Additionally, a set of two boxes is attached. Boxes are
filled in special gel that is able to frozen and un frozen and no need to open them.
2. Pull out the water tank (7) from the back of the machine and pour in the water (Fig. B). Be careful not to exceed the maximum level.
3. Turn on the device using the “ON/OFF ” button on the control panel (Fig. C).
USING THE DEVICE
2. If the device is not used for three or more months, take the batteries out of the remote control.
3. After long time operation, the mesh filter (5) and mesh filer’s frame (10) will be clogged with the dust, which will greatly affect the
machine’s performance of cooling. If long time no changing water, there may be mold and mildew. We suggest to clean the mesh
filter (5) and mesh filer’s frame (10) once every two weeks. The clean procedure is as below:
1. Clean with soft, dry cloth. Do not use chemical solvents because they can cause permanent damage or deformation of the device.
a) Unplug the device, remove the screw of the back housing and then take the frame and filter out.
4. Drain the water before storage by removing the drain plug at the bottom of the water tank. Then dry the device, mesh filter, mesh
filter's frame and housing to aviod the moisture damage.
6. Pressing the SWING button starts the oscillation of vertical slats that provide even distribution of cold air stream in range 120°.
Horizontal slats do not move automatically, so if necessary, manually adjust them to point up or down.
TECHNICAL DATA:
CLEANING AND MAINTENANCE
Tank capacity:7 liters Water Consumption: 0,5 – 0,6 liter / hour
A noticeable reduction in the temperature of the outlet air occurs after putting into the water tank plastic containers attached to the
product previously frozen in the freezer. It is recommended to fill the tank with cold tap water.
b) Wash the filter in a mild detergent and warm water solution, then rinse in clean water.
c) Wash the mesh filer with flowing clean water. Use a soft brush for cleaning.
8. The MODE button allows for changing the fan mode. In addition to the normal mode, you can select “NATURE” and “SLEEP.” The
NATURE mode mimics the natural wind action by repeating the fan speed sequence: middle speed (12 seconds) -> low speed (6
second) -> high speed (3 seconds) -> middle speed (6 second) -> low speed (6 second). The „SLEEP” mode operated in repeating
the fan speed sequence: middle speed (6 seconds) -> low speed (3 seconds).
1. Place the unit on a dry, flat surface and connect to the power supply.
Power: 65 W Power Max: 350 W
To use them, put them on 24 hours inside the freezer. Then put one or both of ice boxes into water tank (7). To blow the cool air, the
device must be filled with water. When the device is operating, periodically check the water level to see whether to add water.
Power source:220-240 V ~50 Hz
9. The button on remote control (9) is same as the control panel (8). Don’t put the stuff in the front of the remote control receivers.
To protect your environment: please separate carton boxes and plastic bags and dispose them in corresponding waste
bins. Used appliance should be delivered to the dedicated collecting points due to hazarsous components, which may
effect the environment. Do not dispose this appliance in the common waste bin.
DEUTSCH
1. Vor dem ersten Gebrauch, die Bedienungsanleitung lesen und die dort angegebenen
Hinweise beachten. Der Produzent trägt keine Verantwortung für Schäden, die aufgrund
Bei Verwendung des Gerätes zu gewerblichen Zwecken werden die Garantiebedingungen
geändert.
ALLGEMEINE SICHERHEITSVORSCHRIFTEN
LESEN SIE AUFMERKSAM WICHTIGE ANWEISUNGEN BEZÜGLICH DER SICHERHEIT
DER BENUTZUNG BEWAHREN SIE DIESE FÜR DIE ZUKUNFT AUF
only to power outlet with ground circuit.
Low voltage directive (LVD)
Device is compliant with EU directives:
Electromagnetic compatibility (EMC)
Device marked CE mark on rating label
Device is made in class I of insulation and has to be connected
4
4

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

Adler-AD-7915

Zoeken resetten

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Adler AD 7915 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Adler AD 7915 in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Portugees, Spaans, Pools, Deens, Zweeds, Fins als bijlage per email.

De handleiding is 2,14 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info