800026
6
Verklein
Vergroot
Pagina terug
1/76
Pagina verder
6
temperature controlling device or time switch.
20. Flammable materials, for example furniture, bedclothes, paper, clothes, curtains should
be kept at least one meter from the device.
21. Do not cover the device or put any objects on it while it is operating. Do not use the
device to dry clothes.
22.The heating surfaces can heat to a temperature of 60 °C or higher. The device should be
in a place that children and animals do not have access to.
23.The device is not intended to be installed or used in vehicles.
24. Some parts inside the device can be hot or cause sparking. Do not use the device in
places, where gasoline, paints or other flammable materials are used or stored.
25. The device must not be located immediately below a socket-outlet.
Before first use
The device should be used in wall sockets in a vertical position only, and not horizontally (lying).
WARNING: Do not use this heater in small rooms when they are occupied by persons not capable of leaving the room on their own, unless
constant supervision is provided.
Device description:
1. Power switch 2. Fan speed butto 3.A. Temperature DOWN button
3.B. Temperature UP button 4. Timer button 5. Air inlet
6. Plug 7. Air outlet 8. Digital display
Instruction Manual
1. Plug device into 220-240V power supply outlet.
2. Press the power switch (1) on side of the unit to position “I” to turn on the device. Default device setting is: temperature 25 degree of
Celsius and high fan speed (HH).
3. Select your desired temperature by pressing “+” button (3.B.) to raise temperature or “-“ button (3.A.) to lower the temperature between
15-35 degree of Celsius on digital display. Pressing the button once changes one degree Celsius.
4. Select your desired fan speed by pressing button (2) to choice between high (HH) or low (LL) fan speed.
At “LL” low fan speed the operation is like below:
- If your desired temperature shown at digital display (8) is higher than present room temperature the heating element will heat the air at low
speed of fan,
- If you desired temperature shown at digital display (8) become lower than present room temperature the heating element stops air
heating, but fan will continue to blow the air at low speed.
At “HH” high fan speed the operation is like below:
- If your desired temperature shown at digital display (8) is higher than present room temperature the heating element will heat the air at
high speed of fan,
- If you desired temperature shown at digital display (8) become lower than present room temperature the heating element stops air
heating, but fan will continue to blow the air at high speed.
5.To change temperature unit from Celsius to Fahrenheit scale button (2) for a few seconds. To come back from Fahrenheit to Celsius press
button (2) for a few seconds again.
6. To stop operation, turn the power switch (1) to “0” position and unplug the device from power outlet.
NOTE: If you do not set the timer, the digital display (8) always shows default setting temperature (25) or desired temperature set up by
you.
Setting the timer
The device has a built-in timer that will automatically turn the device off after a set amount of time.
1. While the unit is plugged in and turned on, press the Timer button (4) to active the function of timer.
2. Press Timer button (4) again to set desired number of hours. You can choose between 1-12 hours.
3. Once desired number of hours have been chosen, the display will flashing twice. The device will automatically turn off after desired
amount of time passed.
4. To cancel timer settings, turn the device off or press the timer button until the display shows “00”.
The digital display shows the temperature set by the user, and if additionally the timer was previously set, the display shows the desired
temperature and the set time alternately.
OVERHEAT PROTECTION SYSTEM
The device is provided with a safety system that automatically cuts the power to the heater in the event of overheating. If this event occurs,
switch the device off, remove the plug from the power outlet and wait until the device has cooled down (after about 10 minutes).
CLEANING AND MAINTENANCE
Make sure the device is not hot. Remove the plug from the socket before cleaning. Keep the inlet and outlet openings clean. Do not allow
dust to settle on them. Use a dry or slightly damp cloth to clean housing. Do not immerse the device in water. Store the device in a cool, dry
place until next use.
TECHNICAL DATA
Voltage: 220-240V~ 50Hz
Power: 400W
Max power: 1500W To protect your environment: please separate carton boxes and plastic bags and dispose them in
corresponding waste bins. Used appliance should be delivered to the dedicated collecting points due
to hazarsous components, which may effect the environment. Do not dispose this appliance in the
common waste bin.
6

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Adler AD 7749 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Adler AD 7749 in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Portugees, Spaans, Pools, Deens, Zweeds als bijlage per email.

De handleiding is 1.28 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info