799984
9
Verklein
Vergroot
Pagina terug
1/108
Pagina verder
9
inside fuse will be broken due to wrong way of operation. In such situation the device cannot work anymore.
REMARK: When the device is clogged due to some object inside the worm gear such us bone, switch off the device immediately.
Kebbe function operation
Use your favorite recipe for the stuffing and an outside dough of Kebbe.
1.Remove the cutting plate (14, 15 or 16) and cross cutting blade (10).
2.Place kebbe attachments (11) onto the worm gear shaft (9) shaft together. Next fit both protrudes in slots. Look at picture 8.
3.Screw the nut (13) into place until tight. Look at picture 9. Do not over tighten.
4. Use the food pusher (1) to move previously prepared dough through the grinding chamber (8) to get cylindrical shape Kebbe dough.
Look at picture 10.
5.Form kebbe as illustrated at picture 11 and deep fry.
Sausage function operation
1.Before starting please assemble sausage attachment (12) as shown at picture 12.
2.Use the food pusher (1) to move slowly the food into the gut overlapped on the sausage attachment (12).
Shredding function operation
1.Press the grinder chamber button (3), hold the shredder head (21) and insert it into the motor gear nest (7). When inserting please pay
your attention the shredder head (21) must be slanted. Look at picture 13. Then move the shredder head (21) anticlockwise, so that the
head being fastened tightly .
2.Put one of shredding attachments (17 or 18 or 19) into the shredder head (21). Look at picture 14.
Note: The chosen shredding attachment must be place deeply.
3. The knob (5) switch to “ON” position to start cutting. Move the food from the tray (2) to the shredder head (21) and then push down it by
the food pusher (20) with not big power. Look at picture 14.
4. After use switch the device off and unplug it from the power supply.4. After use switch the device off and unplug it from the power
supply.
Disassembling
1.Make sure that the motor has stopped completely.
2.Disconnect the plug from the power outlet.
3.Disassemble by reversing all steps from 1-7 pictures.
4.To remove the cutting plate easily, place a knife between the cutting plate and the grinding chamber (8) as illustrated at picture 16 and
lift it up.
5.Press the grinding chamber button (3)move the grinding chamber (8) as per direction illustrated at picture 17. Then you can take out
the grinding chamber (8).
CLEANING AND MAINTENANCE
Look at chart C for help you clean the device in correct way.
1.Before cleaning the device, be sure the power cord unplugged from the power outlet and the speed control knob is on the "0" position.
Let the device cools down before cleaning. Remove meat, etc.
2.Disassemble all accessories from motor unit (6). Do not clean the accessories while mounted on the machine's drive assembly.
3.Don't use aggressive detergents to clean the motor housing (6), as it may remove the informational graphic symbols such as: scale,
safety marks, etc.
4.Do not wash the metal parts in dishwashers. Aggressive cleaning agents used in dishwashers cause the metal parts to turn black. Use
soft brush. A bleaching solution containing chlorine will discolor aluminum surfaces. Handwash the metal parts using traditional washing-
up liquid.
5.Wipe the external parts with kitchen towel or soft cloth.
6. Do not use abrasive materials to clean the device.
7. Wipe all the cutting parts by vegetable oil-wet cloth.
8. Do not immerse the motor unit (6) in water, but only wipe it with a damp cloth.
TECHNICAL DATA
Power supply: 220-240V ~50/60Hz
Power: 600W
Max Power: 2000W
Max operation time in one cycle: 18 minutes.
Minimum rest time between cycles: 10 minutes at least.
To protect your environment: please separate carton boxes and plastic bags and dispose them in corresponding waste
bins. Used appliance should be delivered to the dedicated collecting points due to hazarsous components, which may
effect the environment. Do not dispose this appliance in the common waste bin.
9

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Adler AD 4813 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Adler AD 4813 in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Portugees, Spaans, Pools, Deens, Zweeds als bijlage per email.

De handleiding is 4.49 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info