799449
4
Verklein
Vergroot
Pagina terug
1/84
Pagina verder
4. Handle 5. Base 6. Mesh filter
7. Power button ON/OFF 8. Temperature control button
BEFORE FIRST USE
SINGLE WATER BOILING UP TO 100
1. Lid 2. LCD display 3. Housing
22. Never fill kettle above MAX level and below MIN level. It may cause damage of kettle.
24. Never use kettle without filter or with open cover (automatic shutdown will not work).
29. Children aged 3 to 8 years old can enable and disable the device only when it is in its
normal position of use, they are supervised or instructed on the safe use and understand
the resulting risks. Children aged 3 to 8 years old can not connect device, operate, clean
or maintain.
9. Control lamp 10. Keep warm function indicator
Fill the kettle three times with water to the maximum level, boil and pour it. To remove any factory odor.
27. The device is not designed to work with external schedulers or separate remote
control system.
25. Descale your kettle regularly. Using kettle with heating element covered by scale may
cause damage.
1. Fill the kettle with water so that the water level is between the maximum and minimum levels on the water level indicator.
2. Place the base (5) on a stable, flat and heat-resistant surface.
3. Remember to close the kettle with the lid (1) after filling, otherwise the kettle will not switch off automatically when the water boils.
5. Press the power button (7), the display (2) will blink twice, indicating 100 , then the heater will start heating the water, and the LCD
display (2) will show the current water temperature. The water temperature will rise until it boils, i.e. up to 100°C.
6. After the water boils, the kettle will automatically turn off, you will hear the "di-di" sound.
lid. Do not open the lid during boiling in kettle or immediately after boiling, because steam
coming out of lid can cause burns.
23. Never switch on kettle without water.
26. Do not use aggressive detergents to wash the kettle housing - they can damage the
kettle or remove the markings.
DESCRIPTION OF THE DEVICE. ELECTRIC KETTLE AD1285
BASIC OPERATION:
21. Move the kettle only by holding it by handle..
28. Do not wash the base of the kettle directly in the water, just wipe with a dry cloth.
4. Insert the power plug into the 220-240V ~ 50 / 60Hz power socket. Place the kettle on the base (5), you hear the "di" sound.
7. To turn off the kettle before the water finish boiling, lift it off the base (5) or press the power button (7)
CLEANING AND MAINTENANCE
KEEP WARM FUNCTION AT THE SELECTED TEMPERATURE 40 OR 50 / 60 / 70 / 80 / 90 / 100
Note: Only during this procedure, the keep warm function will be active. After removing the kettle from the base, the keep warm
function settings will be reset.
Put the kettle on the base (5), wait until you hear the “di" sound. Press the temperature control button (8), the display (2) will show the
temperature you choose 40 (or 50 / 60 / 70 / 80 / 90 ) after that press the power button(7) to confirm the
temperature, the LCD display blinks three times remembering the setting of the selected temperature level. Then the display will show
the current water temperature inside the kettle. The kettle will stop boiling water when it reaches the selected temperature level of 40
(or 50 / 60 / 70 / 80 / 90 ), , you will hear the "di-di" sound.
The device is equipped with an automatic fuse against overheating, the fuse will trip when the kettle was used with insufficient water.
Always make sure that the volume of water in the appliance is above the minimum level. If the fuse turns on, turn off the kettle by
pressing the power button (7), then remove the plug from the power socket and allow the kettle to cool for 5-10 minutes. Then fill the
kettle with water and turn on the device that will operate normally.
Put the kettle on the base (5), wait until you hear the "di" sound. Press the temperature control button (8) FOR 2 SECONDS until the
icon (10) appears on the display (2). Press the temperature control button (8) until the display (2) will show the temperature you choose
40 (or 50 / 60 / 70 / 80 / 90 ) and blink three times remembering the setting of the selected temperature level, then
press the power button (7). The display will show the current water temperature inside the kettle. The kettle will stop boiling water when
it reaches the selected temperature level of 40 (or 50 / 60 / 70 / 80 / 90 ), you will hear a single "di" sound, the
control lamp (9) will turn and will blink for 2 hours. Within 2 hours, the kettle will heat the water cyclically, constantly displaying the
selected temperature level to maintain. When the water temperature drops by 5 in relation to the selected temperature level of 40
(or 50 / 60 / 70 / 80 / 90 ), the device will turn on automatically and heat it.
PROTECTION DEVICES
ADVANCED OPERATION:
8. You can start the kettle again after approximately 2 minutes from the last use.
SINGLE WATER BOILING TO THE SELECTED TEMPERATURE 40 OR 50 / 60 / 70 / 80 / 90
9. When the device is not in use, the display (2) turn off lighting after 5 minutes.
4
4

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Adler AD 1285 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Adler AD 1285 in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Portugees, Spaans, Pools, Deens, Zweeds als bijlage per email.

De handleiding is 3.54 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info