641815
8
Verklein
Vergroot
Pagina terug
1/28
Pagina verder
There is a little switch at the bottom side of the scale for country specific settings with the
option to switch from kg = kilogram to lb = pound or st = stone. Please pay attention to
use the scale under consideration of the country specific unit of weight.
4. Weighing function (weight measurement only)
1. Switch-on the scale by using the tap-on-function. For this, tap with your foot for
about 2 seconds on the centre of the scale. The display indicates the signal “8888“
and a few seconds later “0.0 kg. Now the scale is ready to use.
2. Step on the centre of the scale. Remain stationary on the weighing platform and do
not hold you tight. After the scale levelled-off the symbol “Happears and your weight
will be indicated for 10 seconds. Afterwards the scale will switch-off automatically.
Alternatively, direct weighing: Step on the centre of the scale while the scale is switched-
off. The scale switch-on automatically when loaded. At first, the display indicates the
signal “8888“ and after the scale levelled-off your weight will be indicated for 10 seconds.
Afterwards the scale will switch-off automatically.
5. Programming / Enter of personal data
Before first time use your personal data like gender, body height and age must be
programmed and saved under selected locations 01 to 10 (up to 10 persons). The enter
keys are located above the display. To enter your personal data please utilise the
buttons: SET (save button), (minus button), (plus button) and follow the particular
points (numbers quick run-off by pressing the or button for longer than 1 second):
1. Place the scale on a table. Switch-on the scale by using the tap-on-function. For this,
tap with your hand for about 2 seconds on the centre of the scale. The display
indicates the signal8888and a few seconds later 0.0 kg.
2. Press the SET-key. The indication to select your personal location (e.g. 01) starts to
flash. To select your required location (01 to 10) press the or button. After the
selection of your personal location, press the SET-button to save the reading.
3. After you’ve selected your personal location, the symbol for gender starts to flash. To
select the requested gender (female/male) press the or button. After the
selection of your gender, press the SET-button to save the reading.
4. After you’ve selected your gender (e.g. female), the symbol for body height starts to
flash (default woman 160 cm / man 170 cm). To enter your height, press the or
button. After the selection of your body height, press the SET-button to save the
reading.
5. After you’ve selected your body height (e.g. 166 cm), the symbol for age starts to flash
(default age 30). To enter your age press the or button. After the selection of
your age, press the SET-button to save the reading.
The scale indicates once again your selected personal location. That settles the
completion of input and the scale returns to the indication 0.0 kg. The scale is ready to
use and you may now start your body analysis. Without further activity the scale
automatically power-off. Your personal data are stored.
If you push the or button within 2 seconds after the first complete input, you can
directly enter the personal data of a further person. Alternatively, you repeat the complete
steps listed below for further entries of personal data.
6. Body Analysis
An analysis is only possible in bare feet. Your personal data must be entered first (please
see page 4-5).
1. Switch-on the scale by using the tap-on-function. For this, tap with your foot for about 2
seconds on the centre of the scale. The display indicates the signal 8888“ and
afterwards “0.0 kg”.
2. Take off your foot from the weighing platform and select your personal location by using
the or button. At first, your personal data will be displayed and shortly after
“0.0 kg“ will be indicated.
3. Now, carefully step in bare feet on both stainless steel electrodes of the scale and
remain stationary. After the scales levelled-off the symbol “H” will appear.
3. At first, your weight will be indicating. Afterwards, while the measurement is taking place
the signal “1-2-3-4” will appear. During this time, remain stationary on the scale.
4. After completion of the measurement your body fat % (F), your body water % (H), and
your muscle mass % ( ) will be shown successively 3 times.
After a few seconds the scale switch-off automatically.
The body fat content is shown as the amount of stored fat as a percentage of total body
weight. There is no generally accepted set value as this varies significantly according to
gender (due to the different build) and age. Body fat is vital for basic body functions. It’s
protecting organs, cushioning joints, regulating body temperature, storing vitamins and
serves the body as energy storage. As essential for women a minimum body fat
proportion between 10% and 13% and for men between 10% and 13% is requested -
with the exception of competitive athletes.
Body fat is not a clear indicator for health. Too high body weight and a too high body fat
proportion are linked to the incidence of many civilization diseases such as diabetes,
cardiovascular diseases, etc. Lack of movement and improper nutrition are often the
prime course for these diseases. There is an obvious direct relationship between
overweight and lack of movement.
4
5
8

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Ade BA 915 Marisa bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Ade BA 915 Marisa in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Spaans als bijlage per email.

De handleiding is 1,02 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info