624427
138
Verklein
Vergroot
Pagina terug
1/145
Pagina verder
138 Copyright © Acronis International GmbH, 2002-2012.
that the target volume number is the same as the volume number
specified with the
/partition
parameter.
/start:<start sector>
Sets the start sector for deploying a volume to the unallocated space
on the hard disk.
/size:
<volume size in
sectors>
Sets the new size of the volume in sectors. The size of a sector is
considered to be 512 bytes, regardless of the physical sector size on
the hard disk drive.
For example, if you want the volume size to be 512 MB (a megabyte is
1 048 576 bytes), specify the size as follows:
/size:1048576
Specify this size even if you are using a hard disk drive with 4-KB
sectors.
To see the size of the volume in the master image, use the /list
command.
/fat16_32
Enables the file system conversion from FAT16 to FAT32 if t
he volume
size after deployment is likely to exceed 2 GB. Without this parameter,
the deployed volume will inherit the file system from the image.
/restore_bootable:<aut
o|on|off>
Sets the rule of deployment for the master boot record (MBR) when
deploying a volume (when deploying a disk, MBR is always deployed):
auto
: Deploy the MBR only when deploying an active volume that
contains an operating system. Use this setting to ensure that the
operating system can boot.
on: Deploy the MBR when deploying any acti
ve volume, no matter
whether the volume contains an operating system or not.
off
: Do not deploy the MBR. Use this setting, for example, to
preserve the Unix boot loader.
/type:<active|primary|
logical>
Sets the deployed volume to active, primary or logical
, if possible (for
example, there cannot be more than four primary volumes on a disk).
Setting a volume to active always sets it to primary, but a volume that
is set to primary may remain non-active.
If the type is not specified, the software tries to keep
the target
volume type. If the target volume is active, the deployed volume is set
to active. If the target volume is primary and there are other primary
volumes on the disk, one of them will be set to active, and the
deployed volume becomes primary. If n
o other primary volumes
remain on the disk, the deployed volume is set to active.
When deploying a volume to unallocated space, the software extracts
the volume type from the image. For a primary volume, the type will
be set as follows:
If the target disk
is the first according to BIOS and it has no other
primary volumes, the deployed volume will be set to active.
If the target disk is the first according to BIOS and there are other
primary volumes on it, the deployed volume will be set to logical
If the ta
rget disk is not the first according to BIOS, the deployed
volume will be set to logical.
138

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Acronis Snap Deploy 4 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Acronis Snap Deploy 4 in de taal/talen: Engels als bijlage per email.

De handleiding is 2,84 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Acronis Snap Deploy 4

Acronis Snap Deploy 4 Gebruiksaanwijzing - Deutsch - 151 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info