126 Copyright © Acronis International GmbH, 2002-2015
Check file system after recovery
This option is effective only when recovering disks or volumes.
The preset is Disabled.
This option defines whether to check the integrity of the file system after a disk or volume recovery.
The check takes place either immediately after recovery or after the machine boots into the
recovered operating system.
Restart the machine automatically if it is required for recovery
This option is effective when recovery takes place on a machine running an operating system.
The preset is Disabled.
The option defines whether to reboot the machine automatically if it is required for recovery. Such
might be the case when a volume locked by the operating system has to be recovered.
Restart the machine automatically after recovery is finished
This option is effective when operating under bootable media.
The preset is Disabled.
This option enables booting the machine into the recovered operating system without user
interaction.
5.7.2 E-mail notifications
This option is effective for Windows and Linux operating systems.
This option is not available when operating under the bootable media.
The option enables you to receive e-mail notifications about the recovery task's successful
completion, failure or when user interaction is required.
The preset is: Disabled.
To configure e-mail notification
1. Select the Send e-mail notifications check box to activate notifications.
2. Under Send e-mail notifications, select the appropriate check boxes as follows:
When recovery completes successfully.
When recovery fails.
When user interaction is required.
3. In the E-mail addresses field, type the destination e-mail address. You can enter several
addresses separated by semicolons.
4. In the Subject field, type the notification subject.
The subject can include ordinary text and one or more variables. In the received e-mail messages,
each variable will be replaced by its value at the time of task execution. The following variables
are supported:
%description%
