541322
109
Verklein
Vergroot
Pagina terug
1/115
Pagina verder
My CD/DVD Recorder Is Not Supported!
Mixcraft supports three burning engines: Primo, Goldenhawk and IMAPI.
The default and preferred engine is Primo which works on XP, Vista and above. It will burn on the fly, burn CD Text
and supports gap-less tracks.
If you are using Windows XP or Windows Vista, you can use the built in IMAPI burning engine. The draw back to
IMAPI is that it burns two second gaps between tracks on the burned CD.
Goldenhawk
Goldenhawk will burn on the fly and burns without gaps between tracks on the burned CD. Unfortunately,
Goldenhawk does not support as many CD and DVD writers. However, there is some hope.
Since many drives are clones and use the same basic technology, they also share the command system that instructs
the CD and DVD writers what to do. With that in mind, you can try different drive definitions to see if they work with
your drive.
Go into the CD Burning Preferences, make sure that Goldenhawk is selected and then click the Goldenhawk Drive
Override... button. This brings up some options for your unsupported devices. Choose the unsupported drive from
the drop down Select A Drive. First try the Use A Generic CD Writer Drive and then click OK. Restart the software to
see if it's supported by trying a test burn. If that doesn't work, go back into the Goldenhawk Override dialog and try
Use The Driver For This Drive Type option. Select a drive that sounds similar to your drive. Consult the web to find
out what type of drive it could be cloned from. Try a drive with the same manufacturer but at a slower speed, etc.
Note that it is not guaranteed to work, but this is an option to try.
Otherwise, switch to Primo or IMAPI mode if you are using XP or Vista.
I Am Getting Burn Failures
Here are some suggestions to troubleshoot a burn failure.
Try a burn in 'Test Mode' first.
Try a different blank CD (Make sure it's not full or scratched)
Try a different blank CD from a different manufacturer.
Shut down other programs and temporarily shut down your virus checker during a burn. ( Shutting down your
virus checker should be done at your own risk. Make sure you are not connected to the Internet and have
done a full virus scan recently.)
Try burning at a slower speed, especially if your CD recorder does not have 'Burn Proof'.
Try checking the option to 'Convert To WAV First.'
If you have more than one CD or DVD recorder, try switching to the other recorder on the burn CD window.
If you have Windows XP or Vista, try switching to IMAPI.
Try switching to a different burning engine. Choose between Primo (recommended), Goldenhawk and IMAPI.
Try burning a short sound just to verify that CD recorder can still burn and is not defective.
Try burning with another program such as Windows Media Player to verify that your CD recorder is not
defective or having some kind of system conflict.
How Do I Get Rid Of The Two Second Gap Between Tracks On My Burned CD?
In Primo or Goldenhawk mode, audio CDs will not have a two second gap between tracks.
However, if you are burning in IMAPI mode, you are forced by the IMAPI system to have a two second gap between
tracks.
There are two options:
109

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Acoustica Mixcraft-5 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Acoustica Mixcraft-5 in de taal/talen: Engels als bijlage per email.

De handleiding is 1,94 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info