541323
50
Verklein
Vergroot
Pagina terug
1/93
Pagina verder
Setting Recording Level On Vista With WaveRT
If you are using Window's Vista and are using the WaveRT drivers, right click on the speaker icon on the lower
right area of your desktop. (The speaker icon should be to the left of the time display). Right click on the speaker
icon and click on Recording Devices. Select the recording device that you wish to record and then click
Properties. Click on Levels from the pop up window. Move the slider to the appropriate level. You can keep this
window open and try a test recording in Mixcraft. Adjust as necessary.
Recording Multiple Tracks At A Time
You can arm multiple tracks at the same time if your sound device supports it. In this way, you can record an
entire band in real time, with each recording on it's own separate track. Just keep in mind that you will need to use
the arm chooser button as described in the above section to choose the correct input for each track.
Tip: You can set up a project with the correct inputs and armed tracks for your band and then save it as a project
template. The next time you record your band, simply load the template and everything will be ready to record!
Monitor Your Input
You can hear yourself with effects by turning monitoring on. More on monitoring.
Recording Problems?
Recordings Are Not In Sync
Recordings Are Drifting Or Getting Out Of Sync Over Time
Monitoring
"Oh, how I love to hear myself louder!" - Some overjoyed musician.
Some sound devices allow you to hear what you are recording. Most USB microphones do not automatically allow
you to hear what you are recording, though. To hear or 'monitor' a track, click the arm recording selector button
followed by clicking Monitor Incoming Audio.
We recommend that you use headphones in order to avoid feedback.
One caveat to this is that you must set your sound card to mix with a low latency, otherwise it will sound like an
echo chamber and the sound could be delayed by seconds. You can go into the preferences and try ASIO mode,
if available, or reduce the buffer size to 4096 or 2048 and reduce the number of buffers to 2 or 3 in Wave mode.
The down side to reducing your buffers and buffer size is that you may hear gaps in the audio, depending on your
sound card and computer speed.
Hearing Effects In Real Time
If you add effects, you will also hear the effects on a track if monitoring is on. The effects are not recorded and you
can change them or remove them later, without affecting the recording.
Freeze Track
If your computer is slow or audio is starting to gap or stutter because of a lot of effects or time stretching, you can
freeze a track to reduce the amount of processing the track needs. After freezing a track, the software uses a
temporary WAV file that includes all effects and audio.
You cannot edit the effects or sounds on a track until you Unfreeze the track. ( Dragging a new sound on to a track
will unfreeze a track ).
If you want to lock a sound, go here.
To freeze a track, go to the Track Details Tab, select the track you'd like to freeze and then click the Freeze
button.
Page 50 of 93Mixcraft 4
2/7/2008file://C:\acoustica\mixcraft\hel
p
\flat-manual\mixcraft.htm
50

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Acoustica Mixcraft-4 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Acoustica Mixcraft-4 in de taal/talen: Engels als bijlage per email.

De handleiding is 1,17 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info