The Acoustic Energy AEGO5 is a powered 5.1 surround sound
speaker system designed to give maximum acoustic
performance with minimal visual impact. It will enable you to
fill your room with sound rather than speakers and get the best
from your AV surround system.
This manual will help you to get the best out of your AEGO5
system and explain how to link it up with your existing digital
decoder (AEGO5) or straight to your DVD player through the
Acoustic Energy Aego decoder (AEGO
P5).
Section one
- will deal with the AEGO5 speaker system, how to integrate
your existing decoder and placement of your Aego satellite
speakers.
Section two
- will provide details of the Acoustic Energy Dolby Digital/DTS
decoder that is supplied in the AEGOP5 system. Also, how to
connect your DVD player along with other ancillary equipment.
Contents listing:
AEGO5
1 x AEGO5 subwoofer
5 x AEGO5 Satellite Speakers
5 x Wall Brackets
4 x rubber feet for subwoofer
1 x Multi-way signal cable 3M (6 x RCA Phono to 1 x Multi-pin)
1 x Speaker lead 3.5M
2 x Speaker leads 5.5M
2 x Speaker leads 10M
1 x Owners manual
1 x Car Sticker
AEGOp5 - as AEGO5 plus
1 x AEGOP5 Dolby Digital / DTS decoder
1 x power supply
1 x remote control
2 x batteries for remote control
1 x Multi-pin signal cable 3M (G9 multi-pin to G9 multi-pin)
contents
Important Safety Instructions
Introduction
Unpacking
Connecting AEGO5 (with External Power Amplifier)
Key AEGO5 Controls
AEGO5 Speaker Placement
AEGO5 Speaker Orientation
Connecting AEGOP5
Key AEGOP5 Controls
AEGOP5 Front Panel
AEGOP5 Rear Panel
AEGOP5 Remote Control
AEGOP5 Operation
LCD & LEDs
LCD Display
Mode Selection
Input Selection
Test Mode
Mute Mode
Master Volume Control
Balance Setting
Delay Calibration
Time Delay Adjustment on Centre Channel Speaker
Time Delay Adjustment on Rear Surround Speakers
Pro Logic Mode
Speaker Mode with Bass Manager
Saving Presets
Loading Presets
Sound Field Processing
Equalization
DRC (Dynamic Range Compression)
Resetting
Technical Information
Warranty
2
3
3
4
4
5
5
7
7
8
8
9
10
10
10
10
10
11
11
11
11
12
12
12
13
13
14
14
14
14
15
15
16
16
Important Safety
Instructions
To ensure your safety, please read these instructions before
operating this unit.
1. Follow all instructions and observe warnings marked
on the unit.
2. Always use the correct line voltage. Please refer to page 6,
and find out the correct power requirements in your area.
Please note that different operating voltages may require
the use of different adapters.
3. Do not install the unit in an unventilated rack, or directly
above heat producing equipment such as power amplifiers.
4. To avoid shock or fire hazard, do not expose the unit to rain
or moisture, or operate it where it will be exposed to water.
5. Do not attempt to operate the unit if it has been dropped,
damaged, exposed to liquids, or if it exhibits a distinct
change in performance indicating the need for service.
6. Only qualified service personnel should open this unit.
8. Removing covers will expose you to hazardous voltages.
9. Do not overload wall outlet, extension cords or integral
convenience receptacles, as this can result in a risk of fire
or electrical shock.
10.Route power supply cords so that they are not likely to be
walked on or pinched by items placed on or against them,
paying particular attention to cords at plugs, mains
adapters, and the point at which they exit from the unit.
AEGO5/p5 Owners Manual
32
Warning
To reduce the risk of fire or electric shock, do not expose this system
to rain or moisture.
Caution
To reduce the risk of shock, do not remove the cover of this system.
There are no user-serviceable parts inside. Refer servicing to
qualified service personnel.
The
CAUTION marks shown on this page are located on the back of
your system.
The lightning flash, with arrowhead symbol within an
equilateral triangle, is intended to alert the user to the
presence of uninsulated “dangerous voltage” within
the system enclosure that may be of sufficient
magnitude to constitute a risk of electric shock.
The exclamation point within an equilateral triangle as
marked on the system is intended to alert the user to
the presence of important operating and maintenance
instructions in this owner’s guide.
