669753
10
Verklein
Vergroot
Pagina terug
1/40
Pagina verder
CHARGING THE LIPO FLIGHT BATTERY
Connecting to the power source : the A10 Dual Balance Charger comes with built in
switching power supply. You can connect the AC power cord directly to the main AC
socket (110 to 240V AC).
NOTICE: While the A10 is connected to a
suitable 110 to 240V AC power source, the
combined power output for Channel A and
Channel B is 200W, capable of charging two
6-Cell (6S), 4,000mAh LiPo battery packs at
4.3A.
CONNECTING THE B
ATTERY
CHARGING
BATT/PROGRAM Select: Press INC and DEC to go through all the programs and press
START/ENTER to enter LiPo BATT Program (for flight BATT) or Li-ion BATT Program(for
proaction™).
Mode Select: Press INC and DEC to go through all the modes and press START/ENTER
to enter LiPo Balance Charge Mode (for aircraft’s flight battery), to enter Li-ion
Balance Charge Mode (for ProAction ground handle).
Battery Setting: Press START/ENTER, the current value will start to blink, press INC
and DEC to change the value and press START/ENTER to confirm your setting. For the
H920 Plus battery, it is recommended to set 4A (no more than 8A). For ProAction™
battery, it is recommended to set 2A (no more than 3A).
At the same time, the battery cells number will start blinking, press INC and DEC to
change the value and press START/ENTER to confirm your setting.
For the H920 Plus battery, 6S should be selected. For ProAction™, 4S should be
selected.
Program Start: Press and hold START/ENTER for 3 seconds to start the program.
The charger is detecting the battery cell.
NOTICE:
R shows the number of cells detected by the charger and S is the number of
cells set by you at the previous screen. If both numbers are not identical, press STOP
to go back to previous screen to recheck the number of cells of the battery pack
before going ahead. If both numbers are identical, press START/ENTER to start
charging process.
If the number of cells do not match after double checking the connection, please
contact technical support.
BUTTON DESCRIPTIONS
CH A / CH B: Used to switch from Channel A
to B or Channel B to A.
BATT PROG / STOP: Used to stop the
progress or go back to previous step/screen
DEC: Used to go through the menus and
decrease the parameter value.
INC: Used to go through the menus and
increase the parameter value.
ENTER / START: Used to enter parameter or
store parameter on screen.
9
9
CHARGER LA BATTERIE LIPO DE VOL
Branchement sur la source d’alimentation: Le chargeur équilibreur double A10 intègre un bloc d’ali-
mentation à commutation. Vous pouvez brancher directement le cordon AC à la principale prise AC
(110 à 240V AC).
REMARQUE: Lorsque l’A10 est raccordé à
une source d’alimentation appropriée de 110 à
240VAC, la sortie d’alimentation combinée pour
les canaux A et B s’élève à 200W, ce qui per-
met de charger deux blocs de batteries LiPo de
4000mAh à 6 cellules (6S) à 4,3A.
RACCORDER LA BATTERIE
CHARGE
Sélection BATT/PROGRAM: Appuyez sur INC et DEC pour parcourir tous les programmes et ap-
puyez sur START/ENTER pour accéder au programme LiPo BATT (pour BATT de vol) ou au program-
me Li-ion BATT (pour proaction™).
Choix du mode: Appuyez sur «INC» et «DEC» pour parcourir tous les modes et appuyez sur
«START/ENTER» pour accéder au mode «Chargement d’équilibrage LiPo» (pour la batterie de vol du
drone) pour au mode «Chargement d’équilibrage Li-ion» (pour la poignée de stabilisation ProAction).
Paramètres des batteries: Appuyez sur «START/ENTER», la valeur actuelle se met à clignoter, ap-
puyez sur «INC» et «DEC» pour modier cette valeur et ré-appuyez sur «START/ENTER» pour con-
rmer votre paramètre. Pour la batterie du H920 Plus, nous vous recommandons de saisir 4 A (pas
plus de 8A). Pour la batterie du ProAction, nous vous recommandons de saisir 2A (pas plus de 3A).
Parallèlement, le nombre de cellules de batterie se met à clignoter, appuyez sur «INC» et «DEC»
pour modier cette valeur et ré-appuyez sur «START/ENTER» pour conrmer votre paramètre.
Pour la batterie du H920 Plus, vous devez sélectionner «6S». Pour le ProAction, vous devez sélecti-
onner «4S». Lancement d’un programme: Appuyez et maintenez enfoncé «START/ENTER» pendant
3 secondes pour lancer le programme. Le chargeur identie la cellule de batterie.
REMARQUE: «R» indique le nombre de cellules identiées par le chargeur et «S» correspond
au nombre de cellules que vous avez déni dans l’écran précédent. Si ces deux chiffres ne sont pas
identiques, appuyez sur «STOP» pour revenir à l’écran précédent et revérier le nombre de cellules
du bloc de batteries avant de poursuivre. Si les deux numéros sont identiques, appuyez sur «START/
ENTER» pour lancer le processus de chargement. Si le nombre de cellules ne correspond toujours pas
après ce double contrôle, veuillez contacter l’assistance technique.
DESCRIPTION DES BOUTONS
CH A / CH B: Permet de passer du canal A au canal B
et vice-versa.
BATT PROG / STOP: permet d’interrompre la pro-
gression ou de revenir à l’étape/écran précédent
DEC: permet de parcourir les différents menus et de
diminuer la valeur des paramètres.
INC: permet de parcourir les différents menus et
d’augmenter la valeur des paramètres.
ENTER / START: permet de saisir des paramètres ou
d’enregistrer les paramètres à l’écran.
10

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Acer Predator 17 X GX-791 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Acer Predator 17 X GX-791 in de taal/talen: Frans als bijlage per email.

De handleiding is 7,7 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Acer Predator 17 X GX-791

Acer Predator 17 X GX-791 Gebruiksaanwijzing - Nederlands - 99 pagina's

Acer Predator 17 X GX-791 Gebruiksaanwijzing - Deutsch - 106 pagina's

Acer Predator 17 X GX-791 Gebruiksaanwijzing - English - 95 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info