554031
16
Verklein
Vergroot
Pagina terug
1/96
Pagina verder
6-16
6.2.3 Fixing the faceplate
Before fixing the faceplate, first read the following sections (up to page 5-20) and then return here. The preceding sections are
not needed for every installation.
When carrying out the following, make sure that the voltage is disconnected for all connection work. Both the power adapter
and the standby batteries must be disconnected.
Before fixing the faceplate, the following installation work should be complete.
Telephone and power are connected to the PCB of the base plate (section 5.3).
All connection work for additional control cables is completed on the PCB of the base plate (section 5.5).
The brightness is adjusted (section 5.4).
All jumpers are plugged in according to the desired function (section 5.7).
When all these jobs are completed, replace the faceplate and screw it tight. Proceed as follows:
Connect the flat cable of the faceplate to the base plate.
Insert the temper spring into the casing for the tamper opening and clip the faceplate from above into the
base plate.
Fold the faceplate down until it clicks audibly into the base plate.
Screw the case together from below using the screw provided.
The ABUS wireless alarm system is now ready for the following installation steps described in chapter 6.
6.3 How do I install the power and telephone connections?
The ABUS wireless alarm system is powered by a 230V AC power adapter with 9V AC. In this step, make sure only the
secondary power adapter plug is plugged into the base plate (see number 5 on page 5-14: What is what inside the
ABUS wireless
alarm system
?). The power adapter plug must never be plugged into the mains socket. The socket for the power adapter is on the
PCB in the base plate.
Alternatively, the power adapter plug can be connected directly to the base plate after the plug has been removed. The polarity is
unimportant.
For the telephone connection, you can use either an RJ45 plug or an RJ11 plug. The two analogue telephone cables a and b can
also be connected to the screw clamp as shown in the graphic. Here too, the polarity is unimportant. One or more telephone
terminal devices can be connected, but they must be connected after the
ABUS wireless alarm system. The reason: In the event
of an alarm, the system separates the connection to any series-connected telephone terminal devices and then uses this telephone
connection exclusively for transmitting the alarm message (blockade switching). In this way, you prevent a “busy” telephone from
blocking the line in the event of an alarm. To connect your telephone terminal devices to the system, see the above sketch. The
cables of your telephone line must be connected to the
Line connector of the ABUS wireless alarm system. Connect the cables of
your telephone or PBX to the
Set connector.
6.4 How do I adjust the contrast of the LCD display?
The ABUS wireless alarm system has a dimmer for adjusting the brightness and contrast of the LCD display. You should make
adjustments after plugging into the power supply and before replacing the faceplate on the base plate.
To make this setting, turn the LCD light dimmer (see number 8 on page 5-14: What is what inside the ABUS wireless alarm system?)
carefully with a small flat screwdriver until you have set the right brightness.
9 V AC connector
RJ31
Line/Set
RJ11
Line/Set
Screw
terminal
a/b Set
Screw
terminal
Line
16

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Abus FU9000 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Abus FU9000 in de taal/talen: Engels als bijlage per email.

De handleiding is 2,51 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Abus FU9000

Abus FU9000 Installatiehandleiding - Deutsch - 96 pagina's

Abus FU9000 Gebruiksaanwijzing - Deutsch - 55 pagina's

Abus FU9000 Gebruiksaanwijzing - English - 56 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info