8
3. Introduction
• These instructions describe the use of the Emfit SafeBed, bed exit and occupancy
monitor. The version number and details can be found in chapter 21. Technical
specifications.
• Use the device only in the ambient conditions specified by the manufacturer. For
detailed information, refer to chapter 21. Technical specifications.
• Follow all instructions provided in this document concerning the installation, use and
cleaning of the device.
Intended use
The Emfit SafeBed is intended to be used to assist in sensory bed exit and occupancy
monitoring and to notify the caregiver if the person recumbent on a mattress fitted with the
under-mattress sensor leaves the bed or does not return to it within predefined time.
Liability of the manufacturer
Abilia is liable to ensure the safety, reliability and performance of the device, provided that:
• the device is installed, used and cleaned in accordance with the instructions in this
manual
• any changes to the product, maintenance and repairs are conducted by a person
trained by Abilia or its representative
• any spare parts or accessories used have been approved by Abilia
About this manual
Read all warnings and reminders in this manual with care to avoid any hazardous
situations and damage.
4. Package contents
- A control unit and two screws to attach the lid (picture 1)
- A sensor (L-4060SL/L-4060SLC/L-3030SL) (picture 6)
- Two pieces 3M double-sided tape to fix the sensor (picture 26)
- A wall mounting bracket with two screws and two plugs (picture 7)
- Clip for bed side attachment (picture 8)
- This manual
- Two AA size 1.5 V alkaline batteries
- Optional power supply (This part is not included unless it has been ordered as a spare
part) (see chapter Technical Specifications for details) (picture 2)
