559261
12
Verklein
Vergroot
Pagina terug
1/38
Pagina verder
DECT
210
Installation
and Operation
AVM GmbH, Alt-Moabit 95, D-10559 Berlin, Germany
info@avm.de
en.avm.de
412027002
Customer Service
Service information and help can be
found on our website and in the social
networks:
Service
en.avm.de/service
Manual
en.avm.de/service/manuals
Guide
en.avm.de/guide
Downloads
en.avm.de/nc/service/downloads
Support Request
en.avm.de/service/support-request/
your-support-request
Social Networks
English .............................................. 4
Deutsch .............................................. 16
Español ............................................ 28
Français ............................................ 40
Italiano ............................................ 52
Nederlands ............................................ 64
FRITZ!DECT210 is intended for
operation in a dry location that is
protected from direct sunlight and
well ventilated.
FRITZ!DECT 210 has splash protection.
FRITZ!DECT 210 may not be subjected
to a direct stream of water or direct
rain. Splash protection is classi ed as
IP44 only when each of the compo-
nents, plug and socket, have the same
protection class (IP44).
Insert FRITZ!DECT 210 into an electri-
cal outlet that is easy to reach.
FRITZ!DECT 210 devices cannot be
plugged together.
FRITZ!DECT 210 can be subjected to a
maximum load of up to 3450W/15A,
the speci ed output limit. Overloading
can damage FRITZ!DECT 210 and
result in malfunction or an electrical
accident.
No devices that present a risk of re
may be operated unsupervised at the
FRITZ!DECT210 socket (for instance,
electric irons, radiant heaters, electric
grills).
FRITZ!DECT210 may not be altered,
converted, modi ed or repaired ex-
cept by a quali ed technician. Do not
open FRITZ!DECT210!
Make sure that your electrical ap-
pliances are switched o while you
connect them to FRITZ!DECT 210.
Frequent switching can shorten the
service life of electrical devices. Con-
gure automatic switching at frequent
intervals in FRITZ!DECT210 only if
the connected devices are designed
for such operation. No liability will
be accepted for attendant damage to
corresponding devices.
Package Contents
Devices Features
SecurityFRITZ!DECT 210
FRITZ!DECT210 is a smart plug for the
home network.
FRITZ!DECT210 switches electrical de-
vices on and o automatically according
to your speci cations. You can control
FRITZ!DECT210 manually with your
smartphone, your tablet or a cordless
FRITZ!Fon, or con gure it for automatic
control, for instance with a weekly calen-
dar or a Google calendar.
FRITZ!DECT210 measures the power
consumption of connected electrical
devices. You have the option of receiving
these measurement values in a regular
email message.
FRITZ!DECT210 is easy to set up and
operate over the FRITZ!Box, be it at the
home computer or via the internet when
you‘re away from home.
The connection to the FRITZ!Box is estab-
lished using DECT radio.
On/O
DECT
nur IPX4
DECT
Requirements
To operate FRITZ!DECT210 you need:
230-volt outlet
FRITZ!Box with DECT and FRITZ!OS6 or higher (except FRITZ!Box 7312/7412).
For more information, see en.avm.de/dect.
2 buttons and status display
Switch the socket on and o
Establish a secure DECT
connection
LEDs show the connection
status
Smart plug
Plug in electrical devices with
up to 3450 W / 15 A
Splash protection compliant
with IP44
Switch automatically and
manually, even from the
internet
Measure power consumption
DECT function
Wireless connection to the
FRITZ!Box via DECT
On/O
DECT
DECT
210
Installation
and Operation
4 5
Registering FRITZ!DECT 210 with the FRITZ!Box
1. Insert the FRITZ!DECT 210 into an outlet near your FRITZ!Box. The “DECT” LED starts
to ash.
2. Within twominutes, press the “DECT” button on your FRITZ!Box.
Hold the button down until the “Info” or “DECT” LED (depends on the model) begins
ashing.
3. FRITZ!DECT210 is registered with the FRITZ!Box. The wireless connection has been
established when the “DECT” LED on FRITZ!DECT210 lights up.
If “DECT” continues to ash, registration was not successful. Remove
FRITZ!DECT 210 from the power outlet and repeat the registration process.
4. Now insert FRITZ!DECT210 into the socket where you would like to use the device.
FRITZ!DECT210 automatically re-registers with the FRITZ!Box. The connection has
been established when the “DECT” LED on FRITZ!DECT210 lights up.
If “DECT” keeps ashing, test a di erent outlet closer to the FRITZ!Box.
The outlet must be located within the range of the DECT radio network of the
FRITZ!Box.
On/O
DECT
WLAN
DECT
WPS
Power / DSL
Internet
Festnetz
WLAN
Info
WLAN
DECT
WPS
Power / DSL
Internet
Festnetz
WLAN
Info
Info
On/O
DECT
On/O
DECT
On/O
DECT
1
2 3
4
DECT
6 7
Con guring Automatic Switching
Here is how to con gure automatic switching for FRITZ!DECT 210:
1. Open in the user interface the “Smart Home” page (see page 8).
2. Click on (Edit) and then “Switch Automatically”.
3. Select the kind of switching and con gure the automatic switching.
The various types of switching are described comprehensively in the online help of
the user interface.
4. Click “OK” to save your settings.
Switching Manually
You can switch FRITZ!DECT 210 manually, regardless of any automatic switching sched-
ule. The FRITZ!DECT socket is switched o upon delivery. Switch the FRITZ!DECT socket
with the “On/O ” button directly on the device
in the FRITZ!Box user interface on your computer, on the “Smart Home” page
with a FRITZ!Fon cordless telephone
with the MyFRITZ!App on your smartphone or tablet (see page 10)
Controlling FRITZ!DECT 210 Remotely with FRITZ!Fon
With FRITZ!Fon cordless DECT telephones from AVM you can switch FRITZ!DECT210 on
and o , and show the energy display and the thermometer.
1. Press the Menu key on your FRITZ!Fon.
2. Select “Home Network” and then press “OK”.
3. Select “Smart Home” and then press “OK”.
FRITZ!DECT 210 and all other registered FRITZ! actuators are displayed along with their
switching status, energy display and thermometer.
Con guring FRITZ!DECT 210
You can con gure and operate FRITZ!DECT210 in the user interface of your FRITZ!Box.
The user interface can be opened on any computer connected with the FRITZ!Box:
1. Open a web browser.
2. Enter http://fritz.box in the address bar. The user interface opens.
3. Select “Smart Home” in the “Home Network” menu.
The “Smart Home” page appears, presenting a list of the registered Smart Home
devices.
Smart Home Settings
In the FRITZ!Box user interface you can edit all of the settings for FRITZ!DECT 210 under
“Smart Home”.
Click on (Edit) and select a tab:
Tab Here you can ...
General
de ne the switch condition after a power outage
enter your electricity rate
switch o the LED display, prevent manual switching,
and con gure a temperature o set
enable push service. FRITZ!DECT will notify you by
email about device conditions such as energy con-
sumption.
Switch Automatically
con gure automatic switching for the socket
Energy Display monitor power consumption
8 9
Controlling FRITZ!DECT 210 with MyFRITZ!App
With the MyFRITZ! App from AVM you can switch
FRITZ!DECT210 on and o , and show the active power
(power consumption) and the temperature measured.
Your mobile device must have the MyFRITZ!App in-
stalled, which you can download free of charge from the
App Store and from Google Play.
AIN (Actuator Identi cation Number)
Like every other FRITZ!DECT device, your FRITZ!DECT 210 has its own individual AIN
(Actuator Identi cation Number).
The AIN is displayed in your FRITZ!Box user interface under “Home Network / Smart
Home / ” and is printed on the sticker on the back of the device.
Buttons and LEDs
FRITZ!DECT 210 has two buttons with LEDs.
Button Function
On/O Switches the socket on/o
DECT
Deregistration: press for at least 6 seconds
Re-register with FRITZ!Box: Press and hold the button down for at least
6 seconds until it ashes. Then press the “DECT” button on the FRITZ!Box.
LED Condition Meaning
On/O
o Socket is o
on Socket is on
ashing Updating FRITZ!DECT 210
ashes
brie y
The socket was switched o because the permitted
current was exceeded. Read page 14.
DECT
on FRITZ!DECT 210 is registered with a FRITZ!Box.
ashing Registering FRITZ!DECT 210
ashes
brie y
FRITZ!DECT 210 is not registered, or it is outside the
DECT range of your FRITZ!Box
Name of the device
Actuator identi cation number
Serial number
Article number
Technical speci cations
Input: 230 V~; 0.02 A; 50 Hz
AIN:
Article no.: 2000 2757
Max. load: 15 A
FRI !DECT 210
Serial no.:
AVM GmbH,
10547 Berlin
IP44
1
2
3
4
5
1
2
3
4
5
10 11
Reset Consumption Data
FRITZ!DECT 210 can save your consump-
tion data. If you would like to start a new
consumption log, you can delete the
consumption data.
1. Open the user interface with the
“Smart Home” (see page 8).
2. Click on (Edit) and then on
“Energy Display”.
3. Click “Total consumption (kWh)” and
reset the consumption data.
4. Click “OK” to save your settings.
Online Help
FRITZ!DECT210 is displayed and de-
scribed in your FRITZ!Box user interface.
Detailed information on the settings of
FRITZ!DECT 210 is presented in the online
help.
Start the online help for a page of the user
interface by clicking on the question mark
icon.
Deregistering FRITZ!DECT 210
Deregister FRITZ!DECT 210 from your FRITZ!Box if you would like to take FRITZ!DECT 210
out of operation permanently, or if ou would like to register FRITZ!DECT 210 with another
FRITZ!Box.
Press and hold the “DECT” button down for at least six seconds.
After a brief delay the “DECT” LED begins ashing and FRITZ!DECT210 is deregistered
from the FRITZ!Box.
FRITZ!DECT 210 can be re-registered with another FRITZ!Box.
Help in Case of Errors
No Connection with the Base Station
Error Remedy
The “DECT” LED ashes
brie y at regular intervals.
FRITZ!DECT210 does not
have a wireless connection
to the FRITZ!Box.
1. Insert FRITZ!DECT210 into an outlet near your
FRITZ!Box.
2. If the “DECT” LED lights up now, the rst outlet is
located outside the range of the FRITZ!Box, or the
wireless connection was faulty.
Typical sources of interference include (multiple)
closed doors and zones with high humidity (damp
walls, clothes drying racks).
3. If “DECT” continues ashing, FRITZ!DECT210 is not
registered with the FRITZ!Box. Register
FRITZ!DECT210 again.
12 13
Integrated Socket Switched O
Error Remedy
The “On/OLED ashes
brie y at regular intervals
and the connected electrical
device does not work. The
integrated socket is o .
1. Remove the electrical device from
FRITZ!DECT210.
2. Press the “On/O ” button. The integrated socket
is switched back on. The “On/O ” LED lights up.
Do no subject FRITZ!DECT210 to a load higher
than its output limit of 3450W. The connected
devices can take a permanent current of no
more than 15A (resistive load).
3. Insert the electrical device back into the inte-
grated socket.
DECT radio technology: range
1880 MHz – 1900 MHz
Maximum DECT transmitter power:
250mW
Range: up to 40m indoors and up to
300m outdoors
maximum power consumption:
ca. 1.5 W
Power consumption on standby:
ca. 0.4 W
Measurement accuracy:
+/- 100 mW (up to 5 W)
+/- 2% (5 W or higher)
230V, 50Hz A/C
Dimensions (without plug):
65mm x 127 mm x 36mm
Weight: approx. 204g
Protection class: IP44, splash pro-
tection
for connected devices up to
3450W /15A (resistive load)
Ambient temperature: -20°C to +40°C
Manufacturer’s Warranty
We o er a manufacturer’s warranty of 2
years for this original product. The warranty
period begins with the purchase date from
the rst end user. Compliance with the
warranty period can be proven by submis-
sion of the original invoice or comparable
documents. This warranty does not restrict
your warranty rights based on the contract
of sale or other statutory rights. Within the
warranty period, we will remove defects to
the product which are demonstrably due to
faults in materials or manufacturing. Our
warranty does not cover defects which occur
due to incorrect installation, improper use,
non-observance of instructions in the user
manual, normal wear and tear or defects in
the environment of the system (third-party
hardware or software). We may, at our dis-
cretion, repair or replace the defective prod-
uct. Claims other than the right to the remov-
al of defects which is mentioned in these
terms of warranty are not constituted. We
guarantee that the software conforms with
general speci cations, not, however, that the
software meets your individual require-
ments. Delivery costs will not be reimbursed.
Products which have been replaced revert
to our ownership. Claims recognized under
warranty entail neither an extension or
recommencement of the warranty period. If
we reject a warranty claim, this claim lapses
no later than six months after being rejected
by us. This warranty shall be governed by
German substantive law, to the exclusion of
the United Nations Convention on Contracts
for the International Sale of Goods (CISG).
Technical Speci cation
Disposal
In accordance with the Electrical and
Electronic Equipment Act, FRITZ!Powerline
1260E and its cable may not be disposed
with household waste. Please bring these
to your local collection points for disposal.
CE Declaration
AVM declares herewith that the device is
compliant with the basic requirements and
the relevant rules in directives 2014/53/EU,
2009/125/EC and 2011/65/EU.
The long version of the declaration of CE
conformity is available at
http://en.avm.de/ce.
14 15
FRITZ!DECT210 ist für den Betrieb
an einem Ort ohne direkte Sonnen-
einstrahlung und mit ausreichender
Belüftung vorgesehen.
FRITZ!DECT210 ist spritzwasserge-
schützt. FRITZ!DECT210 darf keinem
direkten Wasserstrahl oder direktem
Regen ausgesetzt werden. Der Spritz-
wasserschutz IP44 besteht nur, wenn
auch die beteiligten Komponenten,
Stromstecker und Stromsteckdose, die
gleiche Schutzklasse (IP44) aufweisen.
Stecken Sie FRITZ!DECT210 in eine
leicht erreichbare Steckdose.
Es dürfen keine FRITZ!DECT210 hinter-
einander gesteckt werden.
FRITZ!DECT210 darf bis zur angegebe-
nen Leistungsgrenze von 3450W/15A
belastet werden. Durch Überlastung
kann FRITZ!DECT210 beschädigt
werden und Fehlfunktionen oder ein
elektrischer Unfall könnten die Folge
sein.
An der FRITZ!DECT210-Steckdose dür-
fen keine Geräte mit Brandgefahr
(z. B. Bügeleisen, Heizstrahler, Elektro-
grill) unbeaufsichtigt betrieben werden.
FRITZ!DECT210 darf nicht geändert,
umgebaut, modi ziert oder unsach-
gemäß repariert werden. Ö nen Sie
FRITZ!DECT210 nicht!
Stellen Sie sicher, dass Ihre elek-
trischen Geräte ausgeschaltet sind,
während Sie sie an FRITZ!DECT 210
anschließen.
Häu ges Ein- und Ausschalten kann
die Lebensdauer elektrischer Geräte
verkürzen. Richten Sie nur dann eine
automatische Schaltung mit häu -
gen An- und Ausschaltvorgängen in
FRITZ!DECT210 ein, wenn die ange-
schlossenen Geräte dafür ausgelegt
sind. Für entsprechende Schäden an
angeschlossenen Geräten wird nicht
gehaftet.
Lieferumfang
Gerätemerkmale
SicherheitFRITZ!DECT210
FRITZ!DECT210 ist eine intelligente
Steckdose für das Heimnetz.
FRITZ!DECT210 schaltet elektrische
Geräte nach Ihren Vorgaben automatisch
ein und aus. Sie können FRITZ!DECT210
mit Ihrem Smartphone, Ihrem Tablet
oder einem FRITZ!Fon-Schnurlostelefon
manuell steuern oder zum Beispiel mit
einem wöchentlichen Kalender oder mit
einem Google-Kalender für die automati-
sche Steuerung einrichten.
FRITZ!DECT210 misst den Energie-
verbrauch angeschlossener elektrischer
Geräte. Auf Wunsch erhalten Sie die
Messwerte regelmäßig per E-Mail.
FRITZ!DECT210 lässt sich bequem über
die FRITZ!Box einrichten und bedienen:
zu Hause am Computer und unterwegs
über das Internet.
Die Verbindung zur FRITZ!Box wird über
DECT-Funk hergestellt.
On/O
DECT
nur IPX4
DECT
Voraussetzungen
Für den Betrieb von FRITZ!DECT210 benötigen Sie:
230-Volt-Steckdose
FRITZ!Boxmit DECT und FRITZ!OS6 oder höher (Ausnahme FRITZ!Box 7312/7412).
Weitere Informationen nden Sie auf avm.de/dect.
2 Tasten und Statusanzeige
Steckdose an- und
ausschalten
DECT-Verbindung sicher
herstellen
Leuchtdioden zeigen den
Verbindungsstatus
Intelligente Steckdose
Anschluss elektrischer Gerä-
te bis 3450 W/15 A
Spritzwassergeschützt nach
IP44
automatisch und manuell,
auch aus dem Internet
schalten
Stromverbrauch messen
DECT-Funktion
kabellose Verbindung zur
FRITZ!Box per DECT
On/O
DECT
DECT
210
Installation
and Operation
16 17
FRITZ!DECT 210 an FRITZ!Box anmelden
1. Stecken Sie FRITZ!DECT210 in eine Steckdose in der Nähe Ihrer FRITZ!Box. Die
Leuchtdiode „DECT“ blinkt.
2. Drücken Sie an Ihrer FRITZ!Box innerhalb von zweiMinuten die Taste „DECT“.
Halten Sie die Taste gedrückt, bis die Leuchtdiode „Info“ oder die Leuchtdiode „DECT“
blinkt (geräteabhängig).
3. FRITZ!DECT210 wird an der FRITZ!Box angemeldet. Die Funkverbindung ist
hergestellt, wenn die Leuchtdiode „DECT“ an FRITZ!DECT210 dauerhaft leuchtet.
Falls „DECT“ weiter blinkt, war die Anmeldung nicht erfolgreich. Ziehen Sie
FRITZ!DECT210 aus der Steckdose und wiederholen Sie die Anmeldung.
4. Stecken Sie FRITZ!DECT210 in die Steckdose, an der Sie das Gerät einsetzen möchten.
FRITZ!DECT210 meldet sich automatisch wieder an der FRITZ!Box an. Die Verbindung
ist hergestellt, wenn die Leuchtdiode „DECT“ an FRITZ!DECT210 dauerhaft leuchtet.
Falls „DECT“ dauerhaft blinkt, testen Sie eine andere Steckdose näher an der
FRITZ!Box. Die Steckdose muss innerhalb der Reichweite des DECT-Funknetzes
der FRITZ!Box liegen.
On/O
DECT
WLAN
DECT
WPS
Power / DSL
Internet
Festnetz
WLAN
Info
WLAN
DECT
WPS
Power / DSL
Internet
Festnetz
WLAN
Info
Info
On/O
DECT
On/O
DECT
On/O
DECT
1
2 3
4
DECT
18 19
FRITZ!DECT 210 mit MyFRITZ!App steuern
Mit der MyFRITZ! App von AVM können Sie FRITZ!DECT210 an-
und ausschalten, die Leistungsaufnahme und die gemessene
Temperatur anzeigen.
Auf Ihrem mobilen Gerät muss die MyFRITZ!App installiert
sein, die Sie kostenlos aus dem AppStore und bei GooglePlay
herunterladen können.
AIN (Aktor-Identi kationsnummer)
Ihr FRITZ!DECT 210 und jedes weitere FRITZ!DECT-Gerät hat eine individuelle AIN (Aktor-
Identi kationsnummer).
Die AIN wird unter „Heimnetz / Smart Home / “ in Ihrer FRITZ!Box-Benutzerober-
äche angezeigt und ist auf dem Aufkleber auf der Geräterückseite aufgedruckt.
Tasten und Leuchtdioden
FRITZ!DECT 210 hat zwei Tasten mit Leuchtdioden.
Tasten Funktion
On/O Steckdose an-/ausschalten
DECT
Abmelden: mindestens 6 Sekunden lang drücken
Erneut an FRITZ!Box anmelden: Drücken Sie den Taster mindestens
6Sekunden lang, bis er blinkt. Drücken Sie jetzt die DECT-Taste an der
FRITZ!Box.
Leuchtdiode Zustand Bedeutung
On/O
aus Steckdose ist aus
leuchtet Steckdose ist an
blinkt FRITZ!DECT 210 wird aktualisiert
blinkt
kurz
Die zulässige Stromstärke wurde überschritten und
die Steckdose wurde abgeschaltet. Lesen Sie
Seite 26.
DECT
leuchtet FRITZ!DECT 210 ist an einer FRITZ!Box angemeldet
blinkt FRITZ!DECT 210 wird angemeldet
blinkt
kurz
FRITZ!DECT 210 ist nicht angemeldet oder außerhalb
der DECT-Reichweite Ihrer FRITZ!Box
Bezeichnung des Geräts
Aktor-Identi kationsnummer
Seriennummer
Artikelnummer
Technische Daten
Input: 230 V~; 0.02 A; 50 Hz
AIN:
Article no.: 2000 2757
Max. load: 15 A
FRI !DECT 210
Serial no.:
AVM GmbH,
10547 Berlin
IP44
1
2
3
4
5
1
2
3
4
5
22 23
12

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw AVM FRITZ DECT 200 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van AVM FRITZ DECT 200 in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Spaans als bijlage per email.

De handleiding is 4,79 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

Andere handleiding(en) van AVM FRITZ DECT 200

AVM FRITZ DECT 200 Gebruiksaanwijzing en installatiehandleiding - Deutsch - 14 pagina's

AVM FRITZ DECT 200 Snelstart handleiding - English - 38 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info