810554
10
Verklein
Vergroot
Pagina terug
1/36
Pagina verder
10
signal of relay lightening in the second level
potentional free switcher
HDO (mass remote control) signal potentional free
switcher
signal HDO (mass remote control) activation of
“working zero” N
breakdown signal of floor overheating potentional
free switcher
breakdown signal of overheating 230 V
breakdown signal of pressure loss 230 V
signal of GSM mode
Control unit controls:
mode relay heating elements
mode relay pump
mode TUV (sanitary water) three ways valve for TUV
1.7.4 Antifreeze protection of the boiler
Antifreeze protection of the boiler
This function protects the boiler against freeze and is
active in the mode STAND-BY.
Circulation pump and the boiler are in operation, if
temperature of heating water decreases below 5 °C. In
this case the boiler assures minimal level o heating and
the system is mildly warm, the boiler heats to 15 °C
temperature of heating water and after that the boiler
set back to mode that it start to operate from. Pump
running of is active.
In case that the boiler is in the summer mode
(permanent heating of storage water tank) and the
temperature of heating water decreases below 5 °C
then the antifreeze protection function is activated for
heating system, after the boiler catch the temperature
15 °C, then the 3-ways valve go back to the position for
heating of sanitary water and pump running of is also
active.
If the boiler is switched off or out of electric
supply, this function is not active.
Unlocking protection of heating system
It is active at all times if the circulation pump or
3-ways valve is more than 24 hours out off
operation to protect blocking of the pump or
the valve due to its small parts. This function
avoids blocking of the pump rotor in mode
STAND-BY and elongates its lifetime.
The pump works 1 time per day for 10 s.
1.7.5 Safety function of the boiler
Control unit
The control unit is designed according to valid EU norms
and is certified.
The control unit has a protection against below and
over voltage
The control unit is protected by system Watch-Dog-
Timer with time 512 ms against its processor “blocking”.
In case that the processor is blocking the automatic
reset function is activated and then the program is
going with all parameters set from the point where it
was broken
Protection against overheating
The boiler has an emergency thermostat set for 100 °C.
In case of boiler overheating heating elements are put
out of operation independently to the control unit. This
breakdown is signaling on the display as a critical
breakdown No. 5.
This breakdown could be repaired only by authorized
service man.
Protection against lost of heating water pressure
The boiler equipped with a pressure switcher which
control minimal pressure in heating system 0,4 bar,
when the function reliability of deaerate valves is
assured, it means that the boiler has sufficient volume
of water.
In case of lost of heating water pressure below 0,4 bar
the boiler signs the critical breakdown No. 4 and
heating elements are put out of operation
independently to the control unit.
This breakdown could be repaired after the control of
tightness of water ways and after water filling over 0,4
bar. After that the boiler is automatically reset and
returned to normal operation.
Boiler protection against over and below voltage
in supply electrical net
The control unit is equipped with function assuring
putting the boiler out of operation if the voltage is below
150 V or over 250 V. This stage is marked on the display
like a critical breakdown No. 8. Below voltage is not
marked on the display.
When the voltage is OK = in the scale 150 250 V, the
boiler returns to normal operation.
Boiler protection against overpressure of heating
water
The boiler pump is equipped with pressure safety valve
set for 3 bars. In case of the overpressure more than 3
bars the leakage of water occurs from the valve till the
pressure of water in heating system is not below
maximal requested level.
This valve is in its operation automatically.
10

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw ATTACK Electric Excellent bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van ATTACK Electric Excellent in de taal/talen: Engels als bijlage per email.

De handleiding is 3.14 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info