810551
14
Verklein
Vergroot
Pagina terug
1/28
Pagina verder
14 |
CHIMNEY DRAUGHT BREAKER
The draught breaker is an important part of the boiler. It is installed on the flue gas exhaust with
stable exhaust from 2 to 200 Pa. This item is removable to enable approach for service works. When
installing back, it is necessary to seal it properly. Dimensions and shape of the draught breaker are
given by the producer and must not be changed!
FUNCTION OF THE DRAUGHT BREAKER:
ysafe and perfect burning
ypartial elimination of an excessive exhaust, stabilization of the boiler
efficiency
yprotection of the boiler against possible influence of reverse draught in the chimney
yreverse draught can start as a result of an incorrectly selected exhaust ventilator in a flat or a
house which is dangerous and not allowed
yin the case of accidental intake of flue gas or outside air intake into the boiler, the draught breaker
ensures accomplished burning for a limited time and flue gas returns from the draught breaker
back to the boiler room
FUNCTION OF THE FLUE GAS THERMOSTAT
The flue gas thermostat serves to interrupt the boiler operation by closing the gas supply into the
boiler, if the reverse flue gas flow occurs. The flue gas thermostat is not switched on automatically
after the sensor cools down. It is necessary to switch it on manually, by the red or black button on
the thermostat. If the boiler operation is blocked again, it is necessary to call service technician. The
flue gas thermostat must not be out of order during the boiler operation. The faulty thermostat
must be replaced only with an original one supplied by producer.
BOILER FUNCTION
The required water temperature is kept by the boiler thermostat. When the water temperature
achieves the adjusted value, the appropriate electrical part of the combined valve is closed.There-
by is the gas supply into the burners stopped.
The thermostat enables the power supply and the main burners are ignited immediately after the water tem-
perature decreases for several degrees under the adjusted value (i.e. starting difference value of thermostat).
The flame control is automatic. If the burning conditions change (big drop of gas pressure, gas
supply broken or burning stopped), the valve closes the gas supply into the burners. The emer-
gency thermostat protects the boiler against overheating, if the boiler thermostat or valve fails.
OUTPUT REGULATION
The boiler is equipped with the basic regulation and control elements that serve for one-level
(EKO, KLV), two-level (PLQ, KLQ) and automatically controlled (E, EZ) output regulation. The regula-
tion of the boiler can be set up and controlled only by a specialized service worker.
14

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw ATTACK E bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van ATTACK E in de taal/talen: Engels als bijlage per email.

De handleiding is 1.22 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info