810510
57
Verklein
Vergroot
Pagina terug
1/100
Pagina verder
56
EN
Settings:
The settings made during the installation are stored here, or it is
possible to reload the production or the installation settings.
Three main options are accessible:
„Loading of settings“ – means, that you can reset the original settings
„Saving of settings“ – stands for the final input of the burner settings, made by the installator.
This eases browsing of settings, if it would come to too many parameter changes.
„Production settings“ – are the original settings, that can be reloaded again.
Log:
All the errors are saved and displayed here, together with the
frequency of their incidence. Also the final number of the ignition
trials is here to be read.
There are four options: number of errors:
„Number of errors“ – displays every error code individually, e.g. E–CODE 10(X).
See the page for codes and explanation.
„Number of the first ignitions“ – displays, how many times did the ignition run.
„Number of the second ignitions“ – displays, how many second ignition trials were made by
burner (i.e. how many times did first trial fail).
„Last errors“ – displays the codes of errors in the order according to their incidence. It eases the
troubleshooting.
10 MAINTENANCE OF THE BOILER
During the boiler life is necessary to make maintenance to work properly. The maintenance fre-
quency depends on boiler frequency and utilization when is boiler in operation process.
Maitenance of the heating system with the boiler
It is necessary to check, eventually to refill the water in the heating system at least 1× in 14 days.
If the boiler is out of order during the winter period and danger the water could freeze in the
heating system, then the water should be replaced with an antifreeze mixture approved by the
producer or it should be discharged out of the system. Normally should be the water discharged
only in urgent cases and for ash short time as possible. At the end of the heating season it is nec-
essary to clean the boiler properly and to replace the damaged parts. Twice a year it is necessary
to dismantle the fan, to clean the radial impeller and to clean the fan air chamber.
Adjusting the hinges and exchange of the sealing cord of the door
After a particular period is the sealing cord in the door pressed. To ensure its tightness is neces-
sary to change the position of the door by screwing the door hinges. When the cord completely
loses its elasticity, or the hinges can no longer be moved into the direction to the boiler, it must
be replaced. Undo the worn sealing cord by the screw driver and clean the groove, where it was
laid. Take the new sealing cord and put its ends into the horizontal parts of the groove. Use your
hand, eventually a hammer to press the cord into the groove around the door. Loosen hinges
and find the correct position of door hinges to the door.
MENU/SETUP
ENTER < > EXIT
LOG
ENTER > EXIT
57

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw ATTACK DPX Combi Pellet bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van ATTACK DPX Combi Pellet in de taal/talen: Engels als bijlage per email.

De handleiding is 8.73 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info