GB 3
use
switch the fan on
Press the on/off key once.
The fan switches on at setting 3, and the
green light above the on/off key comes on.
control the extraction capacity
Press key 3 for a lower extraction
capacity. The green light above the key
comes on.
Press key 4 for a higher extraction
capacity. The green light above the key
comes on.
automatic continued operation
Press the plus key once; the appliance
will keep running for 10 minutes after you
have switched it off (2). The green light above
the '10' comes on.
Press the plus key twice; the appliance will
keep running for 20 minutes after you have
switched it off (2). The green light above the
'20' comes on.
Press the plus key three times; the automatic
running-on function will be cancelled.
switch the fan off
Press the on/off key once more. The green
light above the on/off key goes out.
clean the grease filter
The electronic memory of the control unit
records the number of hours the extractor
hood has been in operation.
After 24 hours of operation the green light
above the grease filter indicator key shows
that the filter should be cleaned.
Clean the grease filter if the green light above
the grease filter indicator comes on.
Press the grease filter indicator key after you
have cleaned the grease filter.
The electronic memory will be erased. (you
can only erase the memory after 24 hours of
operation has been reached).
GB 2
for your safety
flambée and frying
When deep-frying, always keep a close
watch.
Never flambe under an extractor hood. The
high flames can cause fire, even if the
ventilator is switched off.
air supply
If you are using the appliance for the first
time then check that the air supply is
sufficient. Dangerous situations can arise if
there is a combination of insufficient air
supply and the use of naked flames.
cleaning
Clean the extractor hood when the indicator
of the grease filter is lighting up.
Follow the instructions for cleaning the filter
and the appliance to meet the requirements
for optimal fire safety. This minimizes the
chance of a fire starting.
switch the lighting on
Press the light button .
The green light above the lighting key will
light up.
switch the lighting off
Press the light button again.
The green light above the lighting key goes
out.
lighting