20
How to Dismantle Parts
Separate the lamp by pulling it out
(
#
)
while
slightly lifting the lamp cover (
" )
.
Turn the bulb counterclockwise. Max. 240 V .
60 W bulb for refrigerator is used and can be
purchased at a service center.
Freezer
compartment
lamp
Dispenser lamp
Freezer
compartment
shelf
Door rack and
support
Ice storage bin
After dispenser
is used
Remove the cover by inserting a flat(
-
type)
driver into the front groove and pulling it out,
and then remove the ramp. Max. 240 V 15 W
bulb for refrigerator is used and can be
purchased at a service center.
Lift the front side (") and pull it out (#).
Lift the door rack holding both sides (") and
pull it out to
(
#
)
direction.
Water collector has no self-drainage function.
So it should be cleaned regularly.Remove the
cover by pressing the left side of water
collector cover and dry it with a cloth.Press
the point marked as shown in the figure to
the right to remove the water collector cover.
Hold the ice storage bin as shown in the right
figure and pull it out
(
#
)
while slightly lifting it
(
" ).
$
It is recommended not to dismantle the ice
storage bin unless it is necessary.
$
Be sure to use both hands when removing
the ice storage bin, not to drop it on the floor.
$
If the ice storage bin does not fit well, slightly
rotate the rotating device.
