GB 9GB 8
fault
Burner does not burn or
ignite properly.
The spark ignition sparks, but
the burner does not ignite.
cause
Burner is dirty or damp.
Burner cap not fitted on the
burner correctly.
The ventilation slots at the
rear of the appliance are
blocked.
Appliance is not suitable for
the type of gas used.
Sparking plug dirty.
Burner is dirty or damp.
Burner cap not fitted on the
burner correctly.
solution
Clean and/or dry the burner.
Fit the burner cap on the
burner correctly.
Unblock the ventilation slots.
Check the data plate and
have the appliance converted
by a qualified fitter if
necessary.
Clean the sparking plug.
Clean and/or dry the burner.
Fit the burner cap on the
burner correctly.
faults
what should I do if…
If the appliance does not work properly, it does not always mean that it is defective. Try
to deal with the problem yourself first. Phone the service department if the advice given
below does not help.
maintenance
cleaning
daily
For daily cleaning of your gas hob, it is best to use a mild
cleaning agent. Do not use too much liquid, since this could
get into the burner or ventilation openings.
stubborn stains
A liquid cleaning agent is best for removing stubborn stains.
Never use scouring powders, abrasive cleaning agents or
scouring pads.
Clean the glass top with a special cleaning agent for ceramic
hobs.
Water marks and lime deposits are most easily removed
using vinegar.
attention!
Remove food remains that have boiled over immediately,
particularly red cabbage, apple sauce and rhubarb. If these
remains are allowed to affect the hob over a period of time,
they can cause discoloration.
Never immerse hot burner caps in cold water. The rapid
cooling can damage the enamel.
