GB 7
operation
switching on
switching on
1 Select an oven function by pressing the appropriate
symbol.
The light above the function selected lights up.
The standard oven temperature appears in the display.
The cooking time blinks.
2 Set the temperature required using the + and - buttons.
The temperature can be adjusted in steps of 5 °C.
3 Set the cooking time using the + and - buttons.
A cooking time of up to 3.59 hours can be set.
4 Press start.
If you wish, you can still adjust the cooking time.
If you forget to press start, the settings you have made will
be erased after one minute and the oven will not start.
during the cooking process
If you do not set a cooking time but do, however, press start,
the oven will still start. You will see the time counting up in
the display.
After the oven has been on for four hours continuously, it
switches off automatically. If stop has been pressed in the
meantime, the clock will start counting again.
The dot after the temperature display goes out when the
oven is at temperature. If the heating elements switch on
again, the dot lights up again.
selecting a function
setting the
temperature
setting the time
start
thermostatic control
cooking time counts
up
GB 6
bringing the oven into operation
before you start cooking
cleaning the oven and accessories
Remove the accessories from the oven and clean the oven
with a mild cleaning agent.
Switch the oven on for an hour at 250 °C (see page 7).
Protective greases used during manufacture will then be
removed.
Remark: When your oven is heated strongly for the first
time, it will have a 'new' smell. This is normal. Switch the
extractor hood on if necessary.
After the oven has cooled down, clean it with warm water.
setting the time
The clock sets itself. A built-in receiver ensures that the
display always shows the correct time.
Once you have connected up the oven, it may take a little
while before there is any reception. During the period when
there is no reception or only a disturbed reception, four
horizontal lines will appear in the display.
You can also set the clock manually.
setting the time manually
1 Check whether the oven is switched off.
2 Press on the time selector switch until the display
starts to blink.
3 Set the correct time using the + and - buttons.
The time will be definitely set a few seconds after you
release the button. After that, the built-in receiver will
automatically keep the time correct (summer and winter
time).
clock
The clock shows
Central European
Time.
See also how the
clock works on
page 25.
