692524
36
Verklein
Vergroot
Pagina terug
1/116
Pagina verder
Operation
36
GB
4 Operation
4.1 The induction hob
The hob is equipped with an induction cooking mode.
An induction coil underneath the glass ceramic hob
generates an electromagnetic alternating fi eld which
penetrates the glass ceramic and induces the heat-
generating current in the pot base.
With an induction cooking zone the heat is no longer
transferred from a heating element through the cooking
pot into the food being cooked; instead the necessary
heat is generated directly in the container by means of
induction currents.
Advantages of the induction hob
Energy-saving cooking through the direct transfer
of energy to the pot (suitable pots/pans made of
magnetisable material are required).
Increased safety as the energy is only transferred
when a pot is placed on the hob.
Highly eff ective energy transfer between an induction
cooking zone and the base of a pot.
Rapid heat-up.
The risk of burns is low as the cooking area is only
heated through the pan base; food which boils over
does not stick to the surface.
Rapid, sensitive control of the energy supply.
4.2 Pan recognition
If a cooking zone is switched on and there is no pan
on the zone or if the pan is too small, there will be no
transmission of power. A blinking in the power level
indicator points this out.
If a suitable pot or pan is placed on the cooking zone,
the power setting will switch on and the power setting
indicator will light up. The power supply will be cut off
when the pan is removed and the power setting indicator
will indicate a blinking .
If the pots and pans placed on the cooking zone are of
smaller dimension, and the pan recognition still switches
on, less power will be supplied.
Pan recognition limits
Cooking zone diameter
(mm)
Recommended minimal
diameter pan base (mm)
220 x 190 115
The base of pots and pans must be of a certain diameter;
if it is not, the induction heat will not be switched on.
Always place pots and pans in the middle of a cooking
zone in order to achieve the best effi ciency.
NOTE
The minimum diameter required to activate the pan
recognition device may vary according to the type of
pot or pan used!
4.3 Operation time limit
The induction hob has an automatic time limit function.
The duration of continuous use of each cooking zone
depends on the power level selected (see chart).
This requires that the setting of a respective cooking
zone is not adjusted during use.
If the operation time limit has been activated, the cooking
zone will switch off , a short signal will sound and an H will
appear in the display.
The automatic switch-off function overrules the operation
time limit, i.e. the cooking zone is only switched off when
the period of time of the automatic switch-off device has
expired (e.g. automatic switch-off after 99 minutes and
cooking level 9 is possible).
Operation time limit
Selected power level Operation time limit in
minutes
1
2
3
4
5
6
7
8
9
P
120
520
402
318
260
212
170
139
113
90
10
4.4 Other functions
If two or more sensor keys are pressed at the same time
(e.g. when a pan is mistakenly put onto a sensor key) no
function will be activated.
The symbol will blink and a time-limited continuous
signal will sound. After a few seconds the appliance will
switch off . Please remove the item located in front of the
sensor keys.
To delete the symbol press the same key or switch the
hob off and on.
4.5 Protection against overheating (induction)
If the hob is used at full power for a longer period, it will
not be possible to cool down the electronics system as
required at a high room temperature.
In order to ensure that no excessive temperatures occur
in the electronics system the power of the cooking zones
may be reduced automatically. Should E2 be displayed
frequently during normal use of the hob and at normal
room temperature, it is likely that cooling is not suffi cient.
This may occur if kitchen units have no openings. The
installation may have to be checked (see the section on
Ventilation).
36

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

ATAG-HIDD8472LV

Zoeken resetten

  • Mijn nieuwe inductie plaat inclusief afzuiging geeft H en E aan tijdens het koken. Kan de plaat niet gebruiken wat betekent deze code? Gesteld op 9-8-2020 om 12:38

    Reageer op deze vraag Misbruik melden

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw ATAG HIDD8472LV bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van ATAG HIDD8472LV in de taal/talen: Nederlands, Duits, Engels, Frans als bijlage per email.

De handleiding is 5,31 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van ATAG HIDD8472LV

ATAG HIDD8472LV Installatiehandleiding - Nederlands, Deutsch, English, Français - 2 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info