Relocation
THE BEST PERFORMANCE
Locate the AiMesh r outer and nodes at the best place.
NOTES: To minimize interference, keep the routers away from devices like cordless phones, Bluetooth
devices and microwave ovens.
We recommend that you place the routers in an open or spacious location.
ZenWiFi AX Mini LED indications
Q1:
Does the AiMesh router support Access Point mode?
A: Yes. You can choose to set the AiMesh router as router mode or access
point mode. Please go to web GUI (http://router.asus.com), and go to the page
Administration > Operation Mode.
ASUS Recycling/T akeback Services
ASUS recycling and takeback programs c ome from our commitment to the highest standards f or protecting our
environment . W e believ e in providing solutions for y ou to be able to responsibly recycle our products, batt eries,
other components, as w ell as the packaging materials. Please go to http://csr .asus .com/english/T akeback .htm for the
detailed recycling information in di erent regions .
REA CH
Complying with the REACH (Reg istration, Evaluation, Authorisation, and Restriction of Chemicals) regulatory
framework, we published the chemical substances in our products at ASUS REA CH website at http://csr .asus.com/
english/REACH.htm
F ederal C ommunications Commission Sta tement
This device complies with P art 15 of the FCC Rules. Operation is subject to the f ollowing two conditions:
• This device may not cause harmful interference .
• This device must accept an y interference receiv ed, including interference that may cause undesir ed operation.
This equipment has been tested and f ound to comply with the limits for a class B digital devic e, pursuant to part 15 of
the FCC Rules . These limits are designed to pr ovide reasonable protection against harmful interference in a residen tial
installation.
This equipment generates , uses and can radiate radio frequency energy and, if not installed and used in ac cordance
with the instructions, may cause harmful interference to radio c ommunications. Howev er , there is no guarant ee that
interference will not occur in a particular installation. If this equipment does cause harmful inter fer ence to radio or
television reception, which can be det ermined by turning the equipment o and on, the user is encouraged to try to
correct the interference by one or more of the f ollowing measures:
• Reorient or relocate the rec eiving antenna.
• Increase the separation between the equipment and rec eiver .
• Connect the equipment into an outlet on a circuit di erent from that t o which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
W ARNING! Any changes or modica tions not expressly approved b y the par ty responsible for c ompliance
could void the user’ s authority to operate the equipmen t.
Prohibition of C o-location
This device and its antenna(s) must not be c o-located or operating in conjunction with any other antenna or
transmitter .
IMPORT ANT NO TE:
Radiation Exposure Statemen t: This equipment complies with FCC r adiation exposure limits set forth for an
uncontrolled en vironment. End users must follo w the specic operating instructions for satisfying RF exposure
compliance. T o maintain compliance with FC C exposure compliance r equirement, please follo w operation instruction
as documented in this manual.
W ARNING! This equipmen t must be installed and operated in accordanc e with provided instructions and the
antenna(s) used for this tr ansmitter must be installed to provide a separa tion distance of at least 20 cm from
all persons and must not be co-located or operating in conjunction with any other antenna or tr ansmitter .
Complianc e Statement of Inno vation, Science and Ec onomic Development C anada (ISED)
This device complies with Innovation, Science and E conomic Development Canada licence ex empt RSS standard(s).
Operation is subject to the following two c onditions: (1) this device may not cause interference, and (2) this devic e
must accept any in ter fer ence, including interference that ma y cause undesired operation of the device.
Operation in the band 5150–5250 MHz is only for indoor use to reduc e the potential for harmful interference to c o-
channel mobile satellite syst ems.
CAN ICES-3(B)/NMB-3(B)
Radio Frequency (RF) Exposure Informa tion
The radiated output po wer of the ASUS Wireless Device is belo w the Innovation, Science and Economic Development
Canada radio frequency exposure limits . The ASUS Wireless Device should be used in such a manner such that the
potential for human c ontact during nor mal operation is minimiz ed.
This equipment should be installed and operated with a minimum distanc e of 23 cm between the radiator any part of
your body .
This device has been certied for use in Canada. Status of the listing in the Innovation, Science and E conomic
Development Canada ’ s REL (Radio Equipment List) can be found at the following w eb address:
http://www.ic .gc.ca/eic/site/ceb-bhst.nsf/eng/h_tt00020.html
Additional Canadian inf ormation on RF exposure also can be found at the f ollowing web:
https://www.ic .gc.ca/eic/site/smt-gst.nsf/eng/sf08792.html
Déclaration de c onformité de Innov ation, Sciences et Dév eloppement économique Canada (ISED )
Le présen t appareil est conforme aux CNR d’Innovation, Sciences et Développement éc onomique Canada applicables
aux appareils radio ex empts de licence. L ’ exploitation est autorisée aux deux conditions suiv antes : (1) l’appareil ne
doit pas produire de br ouillage, et (2) l’utilisateur de l’appar eil doit accepter tout brouillage radioélectrique subi,
même si le brouillage est susceptible d’ en compromettre le f onctionnement.
La bande 5150 – 5250 MHz est réservée uniquement pour une utilisation à l’in térieur an de réduire les risques de
brouillage préjudiciable aux syst èmes de satellites mobiles utilisant les mêmes canaux.
CAN ICES-3(B)/NMB-3(B)
Informations c oncernant l’ exposition aux fréquenc es radio (RF)
La puissance de sortie émise par cet appareil sans l est inférieure à la limite d' exposition aux fréquences radio
d'Innovation, Sciences et Développement économique du C anada (ISED). Utilisez l'appareil sans l de façon à
minimiser les contacts humains lors d'un fonctionnement normal.
Cet équipement doit être installé et utilisé a vec un minimum de 23 cm de distance entre la sour ce de rayonnement et
votre corps .
L 'utilisation de cet appareil est autorisée au Canada. P our consulter l'entrée c orrespondant à l'appareil dans la liste
d'équipement radio (REL - Radio Equipment List) d'Innovation, Sciences et Développemen t économique du Canada,
rendez-vous sur :
http://www.ic .gc.ca/eic/site/ceb-bhst.nsf/eng/h_tt00020.html
Pour des inf ormations supplémentaires concernant l' exposition aux fréquences radio au Canada, r endez-vous sur :
https://www.ic .gc.ca/eic/site/smt-gst.nsf/eng/sf08792.html
F or product available in the US/Canada market, only channel 1~11 can be operated . Selection of other channels is not
possible.
Pour les pr oduits disponibles aux États-Unis et au Canada, seuls les canaux 1 à 11 peuvent êtr e utilisés. La sélection
d’autres canaux n ’ est pas possible.
This device is restricted for indoor use only .
Cet appareil con vient uniquement à un usage intérieur .
Safety Notices
• Use this product in environmen ts with ambient temperatures between 0°C(32°F) and 40°C(104°F).
• Refer to the rating label on the bott om of your product and ensure your pow er adapter complies with this rating .
• DO NOT plac e on uneven or unstable work surfaces. Seek ser vicing if the casing has been damaged.
• DO NOT plac e or drop objects on top and do not shove any f oreign objects into the product.
• DO NOT e xpose to or use near liquids, rain, or moisture . DO NOT use the modem during electrical storms.
• DO NOT c over the vents on the pr oduct to prevent the system fr om getting overheated.
• DO NOT use damaged po wer cords , accessories, or other peripherals.
• If the Adapter is broken, do not try to x it by yourself . Contact a qualied service technician or your retailer .
• T o prevent electrical shock hazard, disconnect the power cable from the electrical outlet befor e relocating the
system.
• DO NOT moun t this equipment higher than 2 meters.
• Utilisez ce produit dans un envir onnement dont la températur e ambiante est comprise entre 0˚C (32°F) et 40˚C
(104°F).
• Référez-v ous à l'étiquette située au dessous du produit pour v érier que l'adaptateur secteur répond aux exigences
de tension.
• NE P AS placer sur une sur face irrégulièr e ou instable. Contactez le service après-vente si le châssis a ét é endommagé.
• NE P AS placer , faire tomber ou insér er d'objets sur/dans le produit.
• NE P AS exposer l'appareil à la pluie ou à l'humidité, t enez-le à distance des liquides. NE P AS utiliser le modem lors
d'un orage.
• NE P AS bloquer les ouvertures destinées à la ventilation du système pour éviter que c elui- ci ne surchau e.
• NE P AS utiliser de cordons d'alimentation, d'accessoir es ou autres périphériques endommagés.
• Si l'adaptateur est endommagé, n 'essayez pas de le répar er vous-même. C ontactez un technicien électrique qualié
ou votre r evendeur .
• Pour évit er tout risque de choc électrique, débranchez le câble d'alimentation de la prise électrique avant de
toucher au système .
• Ne placez pas cet appareil à une haut eur supérieure à 2 mètres.
Manufacturer ASUST eK Computer Inc.
T el: +886-2-2894-3447
Address: 1F ., No. 15, Lide Rd., Beitou Dist., T aipei City 112, T aiwan
Authorised
representa tive in
Europe
ASUS Computer GmbH
Address: HARK ORT STR. 21-23, 40880 RA TINGEN, GERMAN Y
Authorised
distributors in T urk ey
BOGAZICI BIL GISA Y AR TICARET VE SANA YI A.S.
T el./F A X No .: +90 212 331 10 00 / +90 212 332 28 90
Address: ESENTEPE MAH. BUYUKDERE CAD . ERCAN HAN B BL OK NO.121 SISLI, IST ANBUL 34394
CIZGI Elektronik San. T ic. Ltd. Sti.
T el./F A X No .: +90 212 356 70 70 / +90 212 356 70 69
Address: GURSEL MAH. AKMAN SK.47B 1 KAGITHANE/IST ANBUL
K OYUNCU ELEKTRONiK BiL Gi iSLEM SiST . SAN. VE DIS TIC. A.S.
T el. No.: +90 216 5288888
Address: EMEK MAH.ORDU CAD . NO:18, SARIGAZi, SANCAKTEPE IST ANBUL
ENDEKS BİLİŞİM SAN VE DIŞ TİC L TD ŞTİ
T el./F A X No .: +90 216 523 35 70 / +90 216 523 35 71
Address: NECIP F AZIL BUL V ARI, KEY AP CARSI SITESI, G1 BLOK, NO:115 Y .DUDULLU , UMRANIYE,
IST ANBUL
PENT A TEKNOL OJI URUNLERI DA GITIM TICARET A.S
T el./F A X No .: +90 216 528 0000
Address: ORGANIZE SANA YI BOLGESI NA TO Y OL U 4.CADDE NO:1 UMRANIYE, IST ANBUL 34775
Could I setup wired connection between AiMesh routers (Ethernet backhaul)?
Q2:
A: Yes. AiMesh system supports both wireless and wired connection between AiMesh router and node to
maximize throughput and stability. AiMesh analyzes the wireless signal strength for each frequency band
available, and then determines automatically whether a wireless or wired connection is best to serve as the
inter-router connection backbone.
1
Follow the setup steps to establish a connection between the AiMesh router and node via WiFi first.
2
Place the node in the ideal locations for best coverage. Run an Ethernet cable from the LAN port of the
AiMesh router to the LAN port of AiMesh node.
3
AiMesh system will auto-select the best path for data transmission, whether wired or wireless.
LAN-LAN
Modem
FAQ
FREQUENTLY ASKED QUESTIONS
Solid blue:
Your ZenWiFi AX Mini is ready for setup.
Solid yellow:
The signal between your ZenWiFi AX Mini router and the node is weak.
Solid red:
Your ZenWiFi AX Mini router has no Internet connection. / Your node is
disconnected from the router.
Solid white:
Your ZenWiFi AX Mini is online and works well.