Handleiding ASUS ROG SWIFT PG348Q (pagina 26 van 28) (Engels)

769644

Verklein

Vergroot

Pagina terug

1/28

Pagina verder

First Edition

January 2016

No part of this manual, including the products and software described in it, may be reproduced,

transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any

means, except documentation kept by the purchaser for backup purposes, without the express written

permission of ASUSTeK COMPUTER INC. (“ASUS”).

Product warranty or service will not be extended if: (1) the product is repaired, modied or altered, unless

such repair, modication of alteration is authorized in writing byASUS; or (2) the serial number of the

product is defaced or missing.

ASUS PROVIDES THIS MANUAL “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS

OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OR CONDITIONS OF

MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL ASUS, ITS

DIRECTORS, OFFICERS, EMPLOYEES OR AGENTS BE LIABLE FOR ANY INDIRECT, SPECIAL,

INCIDENTAL, OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF PROFITS,

LOSS OF BUSINESS, LOSS OF USE OR DATA, INTERRUPTION OF BUSINESS AND THE LIKE),

EVEN IF ASUS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES ARISING FROM

ANY DEFECT OR ERROR IN THIS MANUAL OR PRODUCT.

SPECIFICATIONS AND INFORMATION CONTAINED IN THIS MANUAL ARE FURNISHED FOR

INFORMATIONAL USE ONLY, AND ARE SUBJECT TO CHANGE AT ANY TIME WITHOUT NOTICE,

AND SHOULD NOT BE CONSTRUED AS A COMMITMENT BY ASUS. ASUS ASSUMES NO

RESPONSIBILITY OR LIABILITY FOR ANY ERRORS OR INACCURACIES THAT MAY APPEAR IN

THIS MANUAL, INCLUDING THE PRODUCTS AND SOFTWARE DESCRIBED IN IT.

Products and corporate names appearing in this manual may or may not be registered trademarks or

copyrights of their respective companies, and are used only for identication or explanation nd to the

owners’ benet, without intent to infringe.

iii

Contents

 

 

 

 



  

  

1.3.1 Side view ......................................................................... 1-2

1.3.2 Back view ........................................................................ 1-3

1.3.3 GamePlus Function ........................................................ 1-4

1.3.4 TURBO Function (only for DisplayPort input) ................. 1-5



  

  

  

  

  

  



  

3.1.1 How to recongure .......................................................... 3-1

3.1.2 OSD function introduction ............................................... 3-1

  

  

  

Notices

Federal Communications Commission Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the

following two conditions:

• This device may not cause harmful interference, and

• This device must accept any interference received including interference that

may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class

B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed

to provide reasonable protection against harmful interference in a residential

installation. This equipment generates, uses and can radiate radio frequency

energy and, if not installed and used in accordance with the instructions, may cause

harmful interference to radio communications. However, there is no guarantee that

interference will not occur in a particular installation. If this equipment does cause

harmful interference to radio or television reception, which can be determined

by turning the equipment off and on, the user is encouraged to try to correct the

interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which

the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

The use of shielded cables for connection of the monitor to the graphics card is

required to assure compliance with FCC regulations. Changes or modications

to this unit not expressly approved by the party responsible for compliance

could void the user’s authority to operate this equipment.

Canadian Department of Communications Statement

This digital apparatus does not exceed the Class B limits for radio noise emissions

from digital apparatus set out in the Radio Interference Regulations of the

Canadian Department of Communications.

This class B digital apparatus complies with Canadian ICES-003.

This Class B digital apparatus meets all requirements of the Canadian Interference

- Causing Equipment Regulations.

Cet appareil numérique de la classe B respecte toutes les exigences du Réglement

sur le matériel brouiller du Canada.

Safety information

• Before setting up the monitor, carefully read all the documentation that came

with the package.

• To prevent re or shock hazard, never expose the monitor to rain or moisture.

• Never try to open the monitor cabinet. The dangerous high voltages inside the

monitor may result in serious physical injury.

• If the power supply is broken, do not try to x it by yourself. Contact a qualied

service technician or your retailer.

• Before using the product, make sure all cables are correctly connected and the

power cables are not damaged. If you detect any damage, contact your dealer

immediately.

• Slots and openings on the back or top of the cabinet are provided for

ventilation. Do not block these slots. Never place this product near or over a

radiator or heat source unless proper ventilation is provided.

• The monitor should be operated only from the type of power source indicated

on the label. If you are not sure of the type of power supply to your home,

consult your dealer or local power company.

• Use the appropriate power plug which complies with your local power standard.

• Do not overload power strips and extention cords. Overloading can result in re

or electric shock.

• Avoid dust, humidity, and temperature extremes. Do not place the monitor in

any area where it may become wet. Place the monitor on a stable surface.

• Unplug the unit during a lightning storm or if it will not be used for a long period

of time. This will protect the monitor from damage due to power surges.

• Never push objects or spill liquid of any kind into the slots on the monitor

cabinet.

• To ensure satisfactory operation, use the monitor only with UL listed

computers which have appropriate congured receptacles marked between

100-240V AC.

• If you encounter technical problems with the monitor, contact a qualied

service technician or your retailer.

• Adjustment of the volume control as well as the equalizer to other settings

than the center position may increase the ear-/headphones output voltage and

therefore the sound pressure level.

• The adapter is only used for this monitor, do not use it for other purpose.

Your device uses one of the following power supplies:

- Manufacturer: Delta Electronics Inc., Model: ADP-120RH B

This symbol of the crossed out wheeled bin indicates that the product (electrical,

electronic equipment, and mercury-containing button cell battery) should not

be placed in municipal waste. Please check local regulations for disposal of

electronic products.

AEEE yönetmeliğine uygundur

Care & Cleaning

• Before you lift or reposition your monitor, it is better to disconnect the cables

and power cord. Follow the correct lifting techniques when positioning the

monitor. When lifting or carrying the monitor, grasp the edges of the monitor.

Do not lift the display by the stand or the cord.

• Cleaning. Turn your monitor off and unplug the power cord. Clean the monitor

surface with a lint-free, non-abrasive cloth. Stubborn stains may be removed

with a cloth dampened with mild cleaner.

• Avoid using a cleaner containing alcohol or acetone. Use a cleaner intended

for use with the monitor. Never spray cleaner directly on the screen, as it may

drip inside the monitor and cause an electric shock.

The following symptoms are normal with the monitor:

• The screen may icker during the initial use due to the nature of the uorescent

light. Turn off the Power Switch and turn it on again to make sure that the

icker disappears.

• You may find slightly uneven brightness on the screen depending on the

desktop pattern you use.

• When the same image is displayed for hours, an afterimage of the previous

screen may remain after switching the image. The screen will recover slowly or

you can turn off the Power Switch for hours.

• When the screen becomes black or ashes, or cannot work anymore, contact

your dealer or service center to x it. Do not repair the screen by yourself!

Conventions used in this guide

WARNING: Information to prevent injury to yourself when trying to

complete a task.

CAUTION: Information to prevent damage to the components when trying

to complete a task.

IMPORTANT: Information that you MUST follow to complete a task.

NOTE: Tips and additional information to aid in completing a task.

vii

Where to nd more information

Refer to the following sources for additional information and for product and

software updates.

1. ASUS websites

The ASUS websites worldwide provide updated information on ASUS

hardware and software products. Refer to http://www.asus.com

2. Optional documentation

Your product package may include optional documentation that may have

been added by your dealer. These documents are not part of the standard

package.

Takeback Services

ASUS recycling and takeback programs come from our commitment to the highest

standards for protecting our environment. We believe in providing solutions for

our customers to be able to responsibly recycle our products, batteries and other

components as well as the packaging materials.

Please go to http://csr.asus.com/english/Takeback.htm for detail recycling

information in different region.

viii

1-1ASUS PG348Q Series LCD Monitor

1.1 Welcome!

Thank you for purchasing the ASUS® LCD monitor!

The latest widescreen LCD monitor from ASUS provides a broader, brighter and

crystal-clear display, plus a host of features that enhance your viewing experience.

With these features, you can enjoy the convenience and delightful visual

experience that the monitor brings to you!

1.2 Packagecontents

Check your package for the following items:

LCD monitor

Driver and Manual disc

Quick start guide

Warranty card

Power adapter

Power cord

DP cable

HDMI cable

USB cable

Stand side covers

input/output port cover

ROG sticker

If any of the above items is damaged or missing, contact your retailer

immediately.

Select Level 1, 2 or 3 when you see the message “LIGHT IN MOTION ON/

OFF” appears if you want to turn on the red light on the base. Select “Level 0”

if you want it to turn off. If you disable this function but later wish to reactivate it,

please use the OSD menu to turn it on.

If no signal is detected for around 12 minutes, the monitor automatically enters

saving mode.

It is recommended that you set the DisplayPort Deep Sleep and HDMI Deep

Sleep functions to “OFF”.

1-2 Chapter 1: Product introduction

1.3 Monitor introduction

 

1. ( 5-way) button:

• Turns on the OSD menu. Enacts the selected OSD menu item.

• Increases/Decreases values or moves your selection up/down/left/right.

• Turns on the OSD menu when the monitor enters standby mode or

displays the “NO SIGNAL“ message.

2. button

• Exits the OSD menu item.

• Toggles the Key Lock function between on and off with a long press for 5

seconds.

• Turns on the OSD menu when the monitor enters standby mode or

displays the “NO SIGNAL“ message.

3. button:

• GamePlus hotkey. Move the ( ) button up/down to select and

press ( ) to confirm the function needed.

• Turns on the OSD menu when the monitor enters standby mode or

displays the “NO SIGNAL“ message.

4. button

• TURBO hotkey. Press the button to select among different refresh rates.

(Only for DisplayPort input)

1-3ASUS PG348Q Series LCD Monitor

• Turns on the OSD menu when the monitor enters standby mode or

displays the “NO SIGNAL“ message.

5. Power button/power indicator

• Turns the monitor on/off.

• The color definition of the power indicator is as the below table.

Status Description

White ON

Amber ashing Entering standby mode

Amber Standby mode/No signal

OFF OFF

Red G-SYNC

1.3.2 Backview

1. Kensingtonlockslot.

2. DisplayPort.This port is for connection for a DisplayPort compatible device.

3. HDMIport. This port is for connection with an HDMI compatible device.

4. USB3.0upstreamport. This port is for connection with a USB upstream

cable. The connection enables the USB ports on the monitor.

5. USB3.0downstreamports. These ports are for connection with USB

devices, such as USB keyboard/mouse, USB flash drive, etc.

6. For service personnel only.

7. Earphonejack. This port is only available when an HDMI/DisplayPort cable

is connected.

8. DC-INport. This port connects the power cord.

9. Controlbuttons.

1-4 Chapter 1: Product introduction

 

The GamePlus function provides a toolkit and creates a better gaming environment

for users when playing different types of games. In addition, Crosshair function is

specially designed for new gamers or beginners interested in First Person Shooter

(FPS) games.

To active GamePlus:

1. Press the GamePlus hotkey.

2. Move the ( ) button up/down to select among different functions.

3. Press the ( ) button or move the ( ) button right to confirm the

function you choose, and move the ( ) button up/down to navigate

through the settings. Move the ( ) button left to go back, off, and exit.

4. Highlight the desired setting and press the ( ) button to activate it.

Press the button to inactivate it.

GamePlus Main Menu GamePlus — Crosshair GamePlus — Timer

NEXT BACK/EXIT

GamePlus

Crosshair

Timer

FPS Counter

FPS

NEXT BACK/EXIT

GamePlus

NEXT BACK/EXIT

GamePlus











1-5ASUS PG348Q Series LCD Monitor

1.3.4 TURBOFunction(onlyforDisplayPortinput)

The TURBO function helps you select among different refresh rates in a convenient

way.

To active TURBO:

Press the TURBO hotkey repeatedly to select.

TURBO

75 Hz

TURBO

85 Hz

TURBO

80 Hz

TURBO

90 Hz

TURBO

95 Hz

TURBO

100 Hz

TURBO

60 Hz

1-6 Chapter 1: Product introduction

2-1ASUS PG348Q Series LCD Monitor

2.1 Assembling the monitor arm/base

1. Remove the stand side covers from monitor arm and take out the screws.

(Figure 1)

2. Insert the arm into the base. (Figure 2)

3. Fasten the screws. (Figure 3)

4. Place the front of monitor face down on the table.

5. Attach stand assembly into the monitor, making sure the tab on the upper of

stand fits into the groove on the back of monitor. (Figure 4)

We recommend that you cover the table surface with soft cloth to prevent

damage to the monitor.

• Do not touch the metal parts on the back of the monitor.

• Do not connect the power cord before assembling the monitor arm/base.

(Figure 3)

(Figure 2)

(Figure 1)

(Figure 4)

2-2 Chapter 2: Setup

2.2 Cable management

You can organize the cables with the help of the input/output port cover and stand

side covers.

 

 : these covers can

be attached or detached.

We recommend that you cover the table surface with soft cloth to prevent

damage to the monitor.

2-3ASUS PG348Q Series LCD Monitor

2.3 Adjusting the monitor

• For optimal viewing, we recommend that you look at the full face of the

monitor, then adjust the monitor to the angle that is most comfortable for you.

• Hold the stand to prevent the monitor from falling when you change its angle.

• The recommended adjusting angle is +20˚ to -5˚ (for tilt)/+50˚ to -50˚ (for

swiveling/ +115 mm (for height adjustment).

115mm

50° 50°

0°

-5° ~ +20°

It is normal that the monitor slightly shakes while you adjust the viewing angle.

2.4 Detaching the arm (for VESA wall

mount)

The detachable arm of this monitor is specially designed for VESA wall mount.

To detach the arm:

1. Place the front of the monitor face down on a table.

2. Press the release button, and then detach the arm/base from the monitor

We recommend that you cover the table surface with soft cloth to prevent

damage to the monitor.

2-4 Chapter 2: Setup

2.5 Connecting the cables

Connect the cables as the following instructions:

• Toconnectthepowercord:

a. Connect the power adapter securely to the monitor’s DC input.

b. Connect one end of the power cord to the power adapter and the other

end to a power outlet.

• ToconnecttheDisplayPort/HDMIcable:

a. Plug one end of the DisplayPort/HDMI cable to the monitor’s

DisplayPort/HDMI port.

b. Connect the other end of the DisplayPort/HDMI cable to your computer's

DisplayPort/HDMI port.

• Tousetheearphone: connect the end with plug type to the monitor’s

earphone jack when an HDMI or DisplayPort signal is fed.

• TousetheUSB3.0ports: Take the supplied USB 3.0 cable, and plug

the smaller end (type B) of the USB upstream cable to the monitor’s USB

upstream port, and the larger end (type A) to your computer’s USB 3.0 port.

Make sure your computer is installed with the lastest Windows 7/Windows 8/

Windows 10 operating system. That will enable the USB ports on the monitor

to work.

2.6 Turning on the monitor

Press the power button . See page 1-2 for the location of the power button. The

power indicator lights up in white to show that the monitor is ON.

3-1ASUS PG348Q Series LCD Monitor

3.1 OSD (On-Screen Display) menu

 

MOVE/ENTER BACK EXIT

On Over Clocking

GameVisual

Blue Light Filter

Color

Image

Input Select

System Setup

Normal Mode DisplayPort 3440 x 1440@ 60Hz

Racing Mode

ASUS ROG PG348

1. Press the ( ) button to activate the OSD menu.

2. Move the ( ) button up/down to navigate through the functions.

Highlight the desired function and press the ( ) button to activate it. If

the function selected has a sub-menu, move the ( ) button up/down

again to navigate through the sub-menu functions. Highlight the desired sub-

menu function and press the ( ) button or move the ( ) button

right to activate it.

3. Move the ( ) button up/down to change the settings of the selected

function.

4. To exit and save the OSD menu, press the button or move the

( ) left repeatedly until the OSD menu disappears. To adjust other

functions, repeat steps 1-3.

 

 

This function allows you to adjust the refresh rate.

MOVE/ENTER BACK EXIT

On Over Clocking

GameVisual

Blue Light Filter

Color

Image

Input Select

System Setup

Normal Mode DisplayPort 3440 x 1440@ 60Hz

Racing Mode

ASUS ROG PG348

• Select “ON” if you want to enable this function.

3-2 Chapter 3: General Instructions

• MaxRefreshRate: After activating this function, you can select one

refresh rate to be displayed along with 60 Hz when pressing the TURBO

hotkey (Only for DisplayPort input).

After reboot, test the new Max Refresh Rate by enabling it in the NVIDIA

Control Panel. If you don’t see an image, disconnect the DP cable and use the

monitor OSD to try again with a safer Max Refresh Rate.

2. GameVisual

This function contains 6 sub-functions you can select for your preference.

Each mode has the Reset selection, allowing you to maintain your setting or

return to the preset mode.

MOVE/ENTER BACK EXIT

Scenery Mode

Racing Mode

Cinema Mode

RTS/RPG Mode

FPS Mode

sRGB Mode

Over Clocking

GameVisual

Blue Light Filter

Color

Image

Input Select

System Setup

Normal Mode DisplayPort 3440 x 1440@ 60Hz

Racing Mode

ASUS ROG PG348

• SceneryMode: This is the best choice for scenery photo displaying with

GameVisualTM Video intelligence Technology.

• RacingMode: This is the best choice for racing game playing with

GameVisualTM Video intelligence Technology.

• CinemaMode: This is the best choice for movie watching with

GameVisualTM Video intelligence Technology.

• RTS/RPGMode: This is the best choice for Real-Time Strategy (RTS)/

Role-Playing Game (RPG) playing with GameVisualTM Video intelligence

Technology.

• FPSMode: This is the best choice for First Person Shooter game playing

with GameVisualTM Video intelligence Technology.

• sRGBMode: This is the best choice for viewing photos and graphics from

PCs.

• In the Racing mode, the following function(s) are not user-configurable:

Saturation.

• In the sRGB mode, the following function(s) are not user-congurable:

Saturation, Color Temp., Brightness, Contrast.

3. BlueLightFilter

Adjusts the blue light filter level.

3-3ASUS PG348Q Series LCD Monitor

MOVE/ENTER BACK EXIT

Level o

Level 1

Level 2

Level 3

Level 4

Over Clocking

GameVisual

Blue Light Filter

Color

Image

Input Select

System Setup

Normal Mode DisplayPort 3440 x 1440@ 60Hz

Racing Mode

ASUS ROG PG348

• Level0:No change.

• Level1~4: The higher the level, the less blue light is scattered.

When Blue Light Filter is activated,the default settings of Racing Mode

will be automatically imported. Between Level 1 to Level 3, the Brightness

function is user-configurable. Level 4 is optimized setting. It is compliance

with TUV Low Blue Light Certification. The Brightness function is not user-

configurable.

Please refer to the following to alleviate eye strains:

• Users should take some time away from the display if working for long

hours. It is advised to take short breaks (at least 5 mins) after around 1

hour of continuous working at the computer. Taking short and frequent

breaks is more effective than a single longer break.

• To minimize eye strain and dryness in your eyes, users should rest the eye

periodically by focusing on objects that are far away.

• Eye exercises can help to reduces eye strain. Repeat these exercises

often. If eye strain continues please consult a physician. Eye exercises: (1)

Repeating look up and down (2) Slowly roll your eyes (3) Move your eyes

diagonal.

• High energy blue light may lead to eye strain and AMD (Age-Related

Macular Degeneration). Blue light Filter to reduce 70% (max.) harmful blue

light to avoiding CVS (Computer Vision Syndrome).

4. Color

Adjusts Brightness, Contrast, Saturation and Color temperature from this

menu.

MOVE/ENTER BACK EXIT

Brightness

Contrast

Saturation

Color Temp.

Over Clocking

GameVisual

Blue Light Filter

Color

Image

Input Select

System Setup

Normal Mode DisplayPort 3440 x 1440@ 60Hz

Racing Mode

ASUS ROG PG348

3-4 Chapter 3: General Instructions

• Brightness: the adjusting range is from 0 to 100.

• Contrast: the adjusting range is from 0 to 100.

• Saturation: The adjusting range is from 0 to 100.

• ColorTemp.: contains 4 modes including Cool, Normal, Warm, and User

Mode.

5. Image

Adjusts OD from this menu.

MOVE/ENTER BACK EXIT

Over Clocking

GameVisual

Blue Light Filter

Color

Image

Input Select

System Setup

Normal Mode DisplayPort 3440 x 1440@ 60Hz

Racing Mode

ASUS ROG PG348

• OD: Improves the gray level response time of the LCD panel. It contains

3 modes including Extreme, Normal and Off.

6. InputSelect

Use the input select to switch between different video signals connected to

the monitor.

MOVE/ENTER BACK EXIT

DisplayPort

HDMI

Over Clocking

GameVisual

Blue Light Filter

Color

Image

Input Select

System Setup

Normal Mode DisplayPort 3440 x 1440@ 60Hz

Racing Mode

ASUS ROG PG348

3-5ASUS PG348Q Series LCD Monitor

7. SystemSetup

Allows you to adjust the system.

MOVE/ENTER BACK EXIT

Language

OSD Position

Transparency

OSD Timeout

Key Lock

Information

LIGHT IN MOTION

Sound

Over Clocking

GameVisual

Blue Light Filter

Color

Image

Input Select

System Setup

Normal Mode DisplayPort 3440 x 1440@ 60Hz

Racing Mode

ASUS ROG PG348

• Language: There are 21 languages for your selection, including English,

French, German, Italian, Spanish, Dutch, Portuguese, Russian, Czech,

Croatian, Polish, Romanian, Hungarian, Turkish, Simplied Chinese,

Traditional Chinese, Japanese, Korean, Thai, Indonesia, Persian.

• OSDPosition: Adjusts the horizontal position (H-Position)/the vertical

position (V-Position) of the OSD.

• Transparency: Adjusts the OSD background from opaque to transparent.

• OSDTimeout: Adjusts the OSD timeout from 10 to 120 seconds.

• Keylock: To disable all function keys. Press over 5 seconds to cancel

the key lock function.

• Information: Shows the monitor information.

• LIGHTINMOTION: Selects the brightness level of the light on the stand.

The adjusting range is from Level 0 to 3.

• Sound:

* Volume: the adjusting range is from 0 to 100.

* Mute: toggles the monitor sound between on and off.

• AllReset: “Yes” allows you to restore the default settings.

• DisplayPortDeepSleep: puts the DisplayPort port into deep sleep.

• HDMIDeepSleep: puts the HDMI port into deep sleep.

If the monitor cannot wake up after going into deep sleep, do one of the

followings:

- Press any button (except ) on the monitor to wake it up.

- Disable the Deep Sleep function. (Recommended)

3-6 Chapter 3: General Instructions

3.2 Specicationssummary

Panel Type TFT LCD

Panel size 34”W (21:9, 86.72 cm) wide screen

Max. Resolution 3440 x 1440

Pixel pitch 0.2325 mm

Brightness (Typ.) 300 cd/m2

Contrast Ratio (Typ.) 1000:1

Viewing angle(H/V) CR>10 178˚/178˚

Display colors 1.07 B (8 bit+A-FRC)

Response time 5 ms

Color temperature selection 4 color temperatures

Analog input No

Digital input DisplayPort v1.2 x 1, HDMI v1.4

Earphone jack Yes

Audio input No

Speaker (Built-in) 2 W x 2 Stereo, RMS

USB 3.0 port Upstream x 1, Downstream x 4

Colors Black

Power LED White (On)/Amber (Standby)

Tilt +20˚~ -5˚

Swivel +50˚~ -50˚

Height adjustment 115 mm

VESA wall mount 100 x 100 mm

Kensington lock Yes

Voltage rating AC: 100~240V

DC: 19V, 6.32A (AC adapter)

Power consumption Power On: < 120 W, Standby: < 0.5 W,

Power Off: < 0.5 W

Temperature (Operating) 0˚C~40˚C

Temperature (Non-operating) -20˚C~+60˚C

Dimensions (W x H x D) 829 mm x 558 mm x 297 mm (highest)

829 mm x 443 mm x 311 mm (lowest)

320 mm x 508 mm x 942 mm (package)

Weight (Esti.) 11.2 kg (Net); 15.5 kg (Gross)

Multi-languages 21 languages (English, French, German, Italian,

Spanish, Dutch, Portuguese, Russian, Czech,

Croatian, Polish, Romanian, Hungarian, Turkish,

Simplied Chinese, Traditional Chinese, Japanese,

Korean, Thai, Indonesia, Persian)

Accessories DP cable, HDMI cable, USB cable, power adapter,

power cord, Driver and Manual disc, Quick start guide,

warranty card, ROG sticker, input/output port cover,

Stand side covers

3-7ASUS PG348Q Series LCD Monitor

Regulation approvals CB, CE, CU, CCC, UL/cUL, FCC, RCM, BSMI, VCCI,

RoHS, WEEE, J-MOSS, ErP, PSE, CEL Level 1,

Windows 7 WHQL, Windows 8.1 WHQL, Windows 10

WHQL, KCC, E-Standby, Low Blue light, Flicker free

*Specifications are subject to change without notice.

3.3 Troubleshooting(FAQ)

Problem Possible Solution

Power LED is not ON • Press the button to check if the monitor

is in the ON mode.

• Check if the power cord is properly

connected to the monitor and the power

outlet.

The power LED lights amber and there is

no screen image

• Check if the monitor and the computer are

in the ON mode.

• Make sure the signal cable is properly

connected the monitor and the computer.

• Inspect the signal cable and make sure

none of the pins are bent.

• Connect the computer with another

available monitor to check if the computer

is properly working.

Screen image is too light or dark • Adjust the Contrast and Brightness

settings via OSD.

Screen image is not centered or sized

properly

• Adjust the H-Position or V-Position

settings via OSD.

Screen image bounces or a wave pattern is

present in the image

• Make sure the signal cable is properly

connected to the monitor and the

computer.

• Move electrical devices that may cause

electrical interference.

Screen image has color defects (white does

not look white)

• Inspect the signal cable and make sure

that none of the pins are bent.

• Perform All Reset via OSD.

• Adjust the R/G/B color settings or select

the Color Temperature via OSD.

3-8 Chapter 3: General Instructions

3.4 Supported operating mode



 

640 x 480 60Hz

720 x 480 60Hz

720 x 576 50Hz

800 x 600 60Hz

1024 x 768 60Hz

1280 x 720 50Hz

1280 x 720 60Hz

1920 x 1080 50Hz

1920 x 1080 60Hz

3440 x 1440 50Hz







 

640 x 480 60Hz

800 x 600 60Hz

1024 x 768 60Hz

3440 x 1440 60Hz







               









3-9ASUS PG348Q Series LCD Monitor



 

3440 x 1440 75Hz

3440 x 1440 80Hz

3440 x 1440 85Hz

3440 x 1440 90Hz

3440 x 1440 95Hz

3440 x 1440 100Hz

























3-10 Chapter 3: General Instructions

ASUS ROG SWIFT PG348Q Handleiding

Hulp nodig? Stel uw vraag in het forum

Misbruik melden

Product:

Spelregels forum

Abonneren

Ontvang uw handleiding per email

Stel vragen via chat aan uw handleiding

Andere handleiding(en) van ASUS ROG SWIFT PG348Q

Uw handleiding is per email verstuurd. Controleer uw email

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

U heeft geen emailadres opgegeven

Uw vraag is op deze pagina toegevoegd

Info