727256

ASUS GT-AC2900 Handleiding

56
Verklein
Vergroot
Pagina terug
1/179
Pagina verder
E15761
E15761
2
Copyright © 2019 ASUSTeK Computer Inc. All Rights Reserved.
No part of this manual, including the products and software described
in it, may be reproduced, transmitted, transcribed, stored in a retrieval
system, or translated into any language in any form or by any means, except
documentation kept by the purchaser for backup purposes, without the
express written permission of ASUSTeK Computer Inc. (“ASUS”).
Product warranty or service will not be extended if: (1) the product is repaired,
modified or altered, unless such repair, modification of alteration is authorized
in writing by ASUS; or (2) the serial number of the product is defaced or
missing.
ASUS PROVIDES THIS MANUAL “AS IS” WITHOUT WARRANTY OF ANY KIND,
EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED
WARRANTIES OR CONDITIONS OF MERCHANTABILITY OR FITNESS FOR A
PARTICULAR PURPOSE. IN NO EVENT SHALL ASUS, ITS DIRECTORS, OFFICERS,
EMPLOYEES OR AGENTS BE LIABLE FOR ANY INDIRECT, SPECIAL, INCIDENTAL,
OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF PROFITS,
LOSS OF BUSINESS, LOSS OF USE OR DATA, INTERRUPTION OF BUSINESS
AND THE LIKE), EVEN IF ASUS HAS BEEN ADVISED OF THE POSSIBILITY OF
SUCH DAMAGES ARISING FROM ANY DEFECT OR ERROR IN THIS MANUAL OR
PRODUCT.
SPECIFICATIONS AND INFORMATION CONTAINED IN THIS MANUAL ARE
FURNISHED FOR INFORMATIONAL USE ONLY, AND ARE SUBJECT TO CHANGE
AT ANY TIME WITHOUT NOTICE, AND SHOULD NOT BE CONSTRUED AS A
COMMITMENT BY ASUS. ASUS ASSUMES NO RESPONSIBILITY OR LIABILITY
FOR ANY ERRORS OR INACCURACIES THAT MAY APPEAR IN THIS MANUAL,
INCLUDING THE PRODUCTS AND SOFTWARE DESCRIBED IN IT.
Products and corporate names appearing in this manual may or may not be
registered trademarks or copyrights of their respective companies, and are used
only for identification or explanation and to the owners’ benefit, without intent
to infringe.
E15761
First Edition v1
August 2019
3
Table of contents
1 Getting to know your wireless router
1.1 Welcome! ...........................................................................................7
1.2 Package contents ...........................................................................7
1.3 Assembling your router ...............................................................7
1.4 Your wireless router .................................................................... 11
1.5 Positioning your router ............................................................. 13
1.6 Setup Requirements ................................................................... 14
2 Getting started
2.1 Router Setup ................................................................................. 15
A. Wired connection.....................................................................15
B. Wireless connection ................................................................ 16
2.2 Quick Internet Setup (QIS) with Auto-detection.............. 18
2.3 Connecting to your wireless network .................................. 21
3 Configuring the General Settings of ROG
Gaming Center
3.1 Logging into the Web GUI ........................................................ 22
3.2 Dash Board .................................................................................... 23
3.3 Aiprotection Pro .......................................................................... 27
3.3.1 Configuring Aiprotection Pro ..............................................28
3.3.2 Blocking Malicious Sites ........................................................30
3.3.3 Two-Way IPS ...............................................................................31
3.3.4 Infected Device Prevention and Blocking ....................... 32
3.3.5 Setting up Parental Control .................................................. 33
3.4 Game Acceleration...................................................................... 36
3.4.1 Triple-level game acceleration ............................................37
3.4.2 QoS ................................................................................................ 38
3.4.3 Game Private Network ...........................................................40
4
Table of contents
3.5 Open NAT ....................................................................................... 42
3.6 Game Radar ................................................................................... 44
3.7 WiFi Radar ...................................................................................... 45
3.7.1 WiFi Site Survey ........................................................................46
3.7.2 Wireless Channel Statistics ...................................................47
3.7.3 Advanced Troubleshooting .................................................. 47
3.8 VPN ................................................................................................... 48
3.8.1 VPN Fusion ..................................................................................49
3.9 Traffic Analyzer ............................................................................. 51
4 Configuring the Advanced Settings
4.1 Using the Network Map ........................................................... 52
4.1.1 Setting up the wireless security settings .........................53
4.1.2 Managing your network clients .......................................... 54
4.1.3 Monitoring your USB device ................................................55
4.1.4 ASUS AiMesh .............................................................................57
4.2 Wireless ........................................................................................... 63
4.2.1 General .........................................................................................63
4.2.2 WPS ...............................................................................................65
4.2.3 Bridge ...........................................................................................67
4.2.4 Wireless MAC Filter ..................................................................69
4.2.5 RADIUS Setting .........................................................................70
4.2.6 Professional ................................................................................71
4.3 Creating a Guest Network ........................................................ 74
4.4 LAN ................................................................................................... 76
4.4.1 LAN IP ...........................................................................................76
4.4.2 DHCP Server ...............................................................................77
4.4.3 Route ............................................................................................79
4.4.4 IPTV ...............................................................................................80
5
Table of contents
4.5 WAN .................................................................................................. 81
4.5.1 Internet Connection ................................................................81
4.5.2 Dual WAN .................................................................................... 84
4.5.3 Port Trigger .................................................................................85
4.5.4 Virtual Server/Port Forwarding ........................................... 87
4.5.5 DMZ ..............................................................................................90
4.5.6 DDNS ............................................................................................91
4.5.7 NAT Passthrough ...................................................................... 92
4.6 Using the USB Application ....................................................... 93
4.6.1 Using AiDisk ...............................................................................94
4.6.2 Using Servers Center ...............................................................96
4.6.3 3G/4G ........................................................................................ 101
4.7 Using AiCloud 2.0 ...................................................................... 102
4.7.1 Cloud Disk ................................................................................ 103
4.7.2 Smart Access ........................................................................... 105
4.7.3 AiCloud Sync ........................................................................... 106
4.8 IPv6 .................................................................................................107
4.9 Firewall ..........................................................................................108
4.9.1 General ...................................................................................... 108
4.9.2 URL Filter .................................................................................. 108
4.9.3 Keyword filter ......................................................................... 109
4.9.4 Network Services Filter ....................................................... 110
4.10 Administration............................................................................111
4.10.1 Operation Mode .................................................................... 111
4.10.2 System ....................................................................................... 112
4.10.3 Firmware Upgrade ................................................................ 113
4.10.4 Restore/Save/Upload Setting ........................................... 113
6
4.11 System Log ..................................................................................114
4.12 Smart Connect............................................................................115
4.12.1 Setting up Smart Connect ................................................. 115
4.12.2 Smart Connect Rule ............................................................. 116
5 Utilities
5.1 Device Discovery .......................................................................119
5.2 Firmware Restoration ...............................................................120
5.3 Setting up your printer server ..............................................121
5.3.1 ASUS EZ Printer Sharing ..................................................... 121
5.3.2 Using LPR to Share Printer ................................................. 125
5.4 Download Master ...................................................................... 130
5.4.1 Configuring Bit Torrent download settings ................. 131
5.4.2 NZB settings ............................................................................ 132
6 Troubleshooting
6.1 Basic Troubleshooting .............................................................133
6.2 Frequently Asked Questions (FAQs) ..................................135
Appendices
Notices........................................................................................................144
ASUS Contact information ..................................................................154
7
1 Getting to know your wireless
router
1.1 Welcome!
Thank you for purchasing ROG Rapture Wireless Router!
The stylish router features 2.4GHz and 5GHz dual bands for
an unmatched concurrent wireless HD streaming; SMB server,
UPnP AV server, and FTP server for 24/7 file sharing; a capability
to handle 300,000 sessions; and the ASUS Green Network
Technology, which provides up to 70% power-saving solution.
1.2 Package contents
NOTES:
• Ifanyoftheitemsaredamagedormissing,contactASUSfor
technical inquiries and support. Refer to the ASUS Support
Hotline list at the back of this user manual.
• Keeptheoriginalpackagingmaterialincaseyouneedfuture
warranty services such as repair or replacement.
GT-AC2900 Wireless Router 3 * wireless antennas
AC adapter Network cable (RJ-45)
Dual-purpose stand/ wall-mount 1 * Screwdriver
Quick Start Guide
1.3 Assembling your router
With dual-prupose stand, GT-AC2900 provides flexibility for you to
choose either to let it stand on a table or hang on a wall.
8
To Hang:
1. Place the dual-purpose stand behind the router, and then align
the protrusion to the hollow.
To Stand:
Place the dual-purpose stand under the router, align the
protrusion to the hollow, and then tighten the screw.
9
2. Push the stand upwards until hearing a slightly click sound.
3. Tighten the screw.
10
4. Hang the router on the wall with hooks and screws.
Note: Ensure that each hook can reliably hold at least 2 kg and is
secured by screws to prevent the router from dropping down. Hooks
are not included in the package.
11
1.4 Your wireless router
WAN (Internet) LED
Off: No IP or no physical connection.
On: Has physical connection to a wide area network (WAN).
2.4GHz / 5GHz Wi-Fi LED
Off: No 2.4GHz / 5GHz signal.
On: Wireless system is ready.
ROG Boost Key
Press this button to change the Aura lighting effects or turn on/off Game
Boost, DFS channels and GeForce Now QoS.
Reset button
This button resets or restores the system to its factory default settings.
Wi-Fi On/Off button
Press this button to turn on /off the Wi-Fi connection.
WPS button
This button launches the WPS Wizard.
LED On/Off button
Press this button to turn on/off the Aura lighting.
12
NOTES:
• Useonlytheadapterthatcamewithyourpackage.Usingother
adapters may damage the device.
• Placetherouterindoorinroomtemperature.Outdoorusageand
extra heat in the environment may cause danger.
• Specifications:
DC Power adapter DC Output: +19V with max 1.75A current
Operating
Temperature 0~40oCStorage 0~70oC
Operating Humidity 50~90% Storage 20~90%
Power button
Press this button to power on or off the system.
Power (DC-IN) port
Insert the bundled AC adapter into this port and connect your router to a
power source.
USB 2.0 port
Insert USB 2.0 compatible devices such as USB hard disks or USB flash drives
into this port.
USB 3.0 port
Insert USB 3.0 devices such as USB hard disks or USB flash drives into this port.
WAN (Internet) port
Connect a network cable into this port to establish WAN connection.
LAN ports
Connect network cables into these ports to establish LAN connection.
13
1.5 Positioning your router
For the best wireless signal transmission between the wireless
router and the network devices connected to it, ensure that you:
• Placethewirelessrouterinacentralizedareaforamaximum
wireless coverage for the network devices.
• Keepthedeviceawayfrommetalobstructionsandawayfrom
direct sunlight.
• Keepthedeviceawayfrom802.11gor20MHzonlyWi-Fi
devices, 2.4GHz computer peripherals, Bluetooth devices,
cordlessphones,transformers,heavy-dutymotors,fluorescent
lights, microwave ovens, refrigerators, and other industrial
equipment to prevent signal interference or loss.
• Alwaysupdatetothelatestfirmware.VisittheASUSwebsiteat
http://www.asus.com to get the latest firmware updates.
• Placethewirelessrouterhorizontally.
45° 45°
14
1.6 Setup Requirements
To set up your wireless network, you need a computer that meets
the following system requirements:
• EthernetRJ-45(LAN)port(10Base-T/100Base-
TX/1000BaseTX)
• IEEE802.11a/b/g/n/ac/axwirelesscapability
• AninstalledTCP/IPservice
• WebbrowsersuchasInternetExplorer,Firefox,Safari,or
Google Chrome
NOTES:
• Ifyourcomputerdoesnothavebuilt-inwirelesscapabilities,you
may install an IEEE 802.11a/b/g/n/ac/ax WLAN adapter to your
computer to connect to the network.
• Withitsdual-bandtechnology,yourwirelessroutersupports
2.4GHz and 5GHz wireless signals simultaneously. This allows
you to do Internet-related activities such as Internet surfing or
reading/writing e-mail messages using the 2.4GHz band while
simultaneously streaming high-definition audio/video files such
as movies or music using the 5GHz band.
• SomeIEEE802.11ndevicesthatyouwanttoconnecttoyour
network may or may not support 5GHz band. Refer to the device's
manual for specifications.
• TheEthernetRJ-45cablesthatwillbeusedtoconnectthe
network devices should not exceed 100 meters.
15
2 Getting started
2.1 Router Setup
IMPORTANT!
• Useawiredconnectionwhensettingupyourwirelessrouterto
avoid possible setup problems.
• BeforesettingupyourASUSwirelessrouter,dothefollowing:
• Ifyouarereplacinganexistingrouter,disconnectitfromyour
network.
• Disconnectthecables/wiresfromyourexistingmodemsetup.If
your modem has a backup battery, remove it as well.
• Rebootyourcablemodemandcomputer(recommended).
A. Wired connection
NOTE: You can use either a straight-through cable or a crossover
cable for wired connection.
To set up your wireless router via wired connection:
1. Plug your router into
a power outlet and
power it on. Connect the
network cable from your
computer to a LAN port
on your router.
Modem
Wall Power Outlet
LINE LAN RESET PWR
Power
1
WAN LAN
4
3 2
Laptop
GT-AC2900
16
2. The web GUI launches automatically when you open a web
browser. If it does not auto-launch, enter
http://router.asus.com
3. Set up a password for your router to prevent unauthorized
access.
B. Wireless connection
To set up your wireless router via wireless connection:
1. Plug your router into a power outlet and power it on.
2. Connect to the network name(SSID) shown on the product
label on the back side of the router. For better network security,
change to a unique SSID and assign a password.
Modem
Wall Power Outlet
LINE LAN RESET PWR
Power 1WAN
3
2
GT-AC2900
Laptop
Tablet
Smart phone
17
3. Once connected, the web GUI launches automatically when
you open a web browser. If it does not auto-launch, enter
http://router.asus.com.
4. Set up a password for your router to prevent unauthorized
access.
NOTES:
• Fordetailsonconnectingtoawirelessnetwork,refertotheWLAN
adapter’s user manual.
• Tosetupthesecuritysettingsforyournetwork,refertothe
section Setting up the wireless security settings in Chapter 3 of
this user manual.
ASUS router
Default SSID: ASUS_XX
* XX refers to the last two digits of the MAC
address. You can find it on the label at the
bottom of your ROG router.
18
2.2 Quick Internet Setup (QIS) with Auto-
detection
The Quick Internet Setup (QIS) function guides you in quickly
setting up your Internet connection.
NOTE: When setting the Internet connection for the first time, press
the Reset button on your wireless router to reset it to its factory
default settings.
To use QIS with auto-detection:
1. Launch a web browser. You will be redirected to the ASUS
Setup Wizard (Quick Internet Setup). If not, key in
http://router.asus.com manually.
2. The wireless router automatically detects if your ISP connection
type is Dynamic IP, PPPoE, PPTP and L2TP. Key in the
necessary information for your ISP connection type.
IMPORTANT! Obtain the necessary information from your ISP about
the Internet connection type.
19
3. Assign the wireless network name (SSID) and security key for
your 2.4GHz and 5 GHz wireless connection. Click Apply when
done.
NOTES:
• Theauto-detectionofyourISPconnectiontypetakesplacewhen
you configure the wireless router for the first time or when your
wireless router is reset to its default settings.
• IfQISfailedtodetectyourInternetconnectiontype,clickSkip
to manual setting and manually configure your connection
settings.
4. Choose preferred function of the Boost key.
• Aura Shuffle: Allows you to change your Aura lighting
effects by pressing the Boost Key.
• DFS channel on/off: Utilizes additional 5GHz channels
providing greater bandwidth with less interference.
• GeForce NOW on/off: Prioritizes GeForce Now gaming
devices.
• Game Boost enable/disable: Prioritizes the gaming packet.
20
5. On the Login Information Setup page, change the router’s
login password to prevent unauthorized access to your
wireless router.
NOTE: The wireless router's login username and password is different
from the 2.4GHz/5GHz network name (SSID) and security key. The
wireless router's login username and password allows you to log into
your wireless router's Web GUI to configure your wireless router's
settings. The 2.4GHz/5GHz network name (SSID) and security key
allows Wi-Fi devices to log in and connect to your 2.4GHz/5GHz
network.
21
2.3 Connecting to your wireless network
After setting up your wireless router via QIS, you can connect your
computer or other smart devices to your wireless network.
To connect to your network:
1. On your computer, click the network icon in the notification
area to display the available wireless networks.
2. Select the wireless network that you want to connect to, then
click Connect.
3. You may need to key in the network security key for a secured
wireless network, then click OK.
4. Wait while your computer establishes connection to the
wireless network successfully. The connection status is
displayed and the network icon displays the connected
status.
NOTES:
• Refertothenextchaptersformoredetailsonconfiguringyour
wireless network's settings.
• Refertoyourdevice'susermanualformoredetailsonconnecting
it to your wireless network.
22
3 Configuring the General Settings
of ROG Gaming Center
3.1 Logging into the Web GUI
Your ROG Rapture gaming router comes with an intuitive web
graphical user interface (GUI) - ROG Gaming Center, which gives
you total network control, with need-to-know information such as
connected device status and worldwide game-server ping values,
and instant access to all the amazing gaming features.
NOTE: The features may vary with different firmware versions.
To log into the web GUI:
1. On your web browser, manually key in the wireless router’s
default IP address: http://router.asus.com.
2. On the login page, key in the default user name (admin) and
the password that you have set in 2.2 Quick Internet Setup
(QIS) with Auto-dection.
3. You can now use the Web GUI to configure various settings of
your ASUS Wireless Router.
NOTE: If you are logging into the Web GUI for the first time, you will
be directed to the Quick Internet Setup (QIS) page automatically.
23
3.2 Dash Board
Dash Board allows you to monitor the real-time traffic for your
networking environment and analyze the real-time network ping
and ping deviation.
Network ping refers to online game experiences. Higher ping
means higher latency for real-time games. For most online games,
network ping that is less than 99 ms is considered good quality.
If network ping is less than 150 ms, the quality is acceptable.
Generally, if network ping is more than 150 ms, it is hard to play
game smoothly.
Ping deviation is also highly related with online game experiences.
With higher ping deviation, it is much easier causing possible
toggle when playing online game. There is no baseline for ping
deviation. However, lower ping deviation is better.
24
• Game Radar: Game Radar from Dashboard could give you a
quick look about ping time for specific game server.
25
• Aura RGB: Allows users to define or turn on/off the Aura RGB
from Dashboard. You can setup any color and choose either of
the 11 lighting patterns.
• EventTrigger
When choosing Event Trigger light mode, the system will
detect the following events, and trigger the LED to show
different lighting effects as notifications.
• GameBoost
When turn on Game Boost, the LED shows Flash in Red. To
know more about Game Boost, see 3.4 Game Acceleration.
• TracMeter
Rainbow LED shows your real-time traffic, and it changes the
color combination according to your Internet speed.
26
• Log-inFail
When failing to log in ASUSWRT, you will see Comet in Red
on the LED bar.
• Attack Block
When the system successfully blocks a potential attack, the
LED shows Comet in Red.
Note: Once selecting Event Trigger mode, the system will show
different lighting effects based on the current detected events. You
cannot control the lighting effect when selecting this function.
• Boost Key: ROG Rapture gaming router supports Boost Key
button on the physical product and allows users to define the
functions of Boost Key from Dashboard.
• Aura Shuffle: Allows you to change your Aura lighting effect
by pressing the Boost Key.
• DFS channel on/off: Utilizes additional 5GHz channels
providing greater bandwidth with less interference.
• GeForce NOW on/off: Prioritizes GeForce Now gaming
devices.
• Game Boost enable/disable: Prioritizes the gaming packet.
27
3.3 Aiprotection Pro
Aiprotection Pro provides real-time monitoring that detects
malware, spyware, and unwanted access. It also filters unwanted
websites and apps and allows you to schedule Internet access
time for a connected device.
28
3.3.1 Configuring Aiprotection Pro
AiprotectionPropreventsnetworkexploitsandsecuresyour
network from unwanted access.
To Configure Aiprotection Pro:
1. From the navigation panel, go to General > Aiprotection Pro.
2. FromtheAiprotectionPromainpage,clickNetwork
Protection.
3. FromtheNetworkProtectiontab,clickScan.
The search results are displayed on the Router Security
Assessment page.
29
IMPORTANT! Items marked with Yes on the Router Security
Assessment page are considered to be safe.
4. (Optional)FromtheRouter Security Assessment page,
manually configure the items marked as No, Weak, or Very
Weak. To do this:
a. Click an item to go to the item’s setting page.
b. Fromtheitem’ssecuritysettingspage,configureand
make the necessary changes and click Apply when done.
c. Go back to the Router Security Assessment page and
click Closetoexitthepage.
5. Click OK on the confirmation message.
30
3.3.2 Blocking Malicious Sites
This feature restricts access to known malicious websites in the
clouddatabaseforanalways-up-to-dateprotection.
NOTE: This function is automatically enabled if you run the Router
Weakness Scan.
To enable Malicious Sites Blocking:
1. From the navigation panel, go to General > Aiprotection Pro.
2. FromtheAiprotectionPromainpage,clickNetwork
Protection.
3. FromtheMaliciousSitesBlockingpane,clickON.
31
3.3.3 Two-Way IPS
Thisfeatureresolvescommonexploitswithintherouter
configuration.
NOTE: This function is automatically enabled if you run the Router
Weakness Scan.
To enable Two-Way IPS:
1. From the navigation panel, go to General > Aiprotection Pro.
2. FromtheAiprotectionPromainpage,clickNetwork
Protection.
3. FromtheTwo-WayIPSpane,clickON.
32
3.3.4 Infected Device Prevention and Blocking
This feature prevents infected devices from communicating
personalinformationorinfectedstatustoexternalparties.
NOTE: This function is automatically enabled if you run the Router
Weakness Scan.
To enable infected device prevention and blocking:
1. From the navigation panel, go to General > Aiprotection Pro.
2. FromtheAiprotectionPromainpage,clickNetwork
Protection.
3. FromtheInfectedDevicePreventionandBlockingpane,click
ON.
To configure Alert Preference:
1. FromtheInfectedDevicePreventionandBlockingpane,click
Alert Preference.
2. Selectorkeyinthee-mailprovider,e-mailaccount,and
password then click Apply.
33
3.3.5 Setting up Parental Control
Parental Control allows you to control the Internet access time or
set the time limit for a client’s network usage.
To enable Parental Control:
1. From the navigation panel, go to General > Aiprotection Pro.
2. FromtheAiprotectionPromainpage,clickParental Controls
tab.
34
Web & Apps Filters
Web & Apps Filters is a feature of Parental Controls that allows you
to block access to unwanted web sites or applications.
To configure Web & Apps Filters:
1. From the navigation panel, go to General > Aiprotection Pro.
2. From the Aiprotection Pro main page, click Parental Controls
icon to go to the Parental Controls tab.
3. From the Web & Apps Filters pane, click ON.
4 When the End Users License Agreement (EULA) message
prompt appears, click I agree to continue.
5. From the Client List column, select or key in the client’s name
from the dropdown list box.
6. From the Content Category column, select the filters from
the four main categories: Adult, Instant Message and
Communication, P2P and File Transfer, and Streaming and
Entertainment.
7. Click to add the client’s profile.
8. Click Apply to save the settings.
35
Time Scheduling
Time Scheduling allows you to set the time limit for a client’s
network usage.
NOTE: Ensure that your system time is synchronized with the NTP
server.
To configure Time Scheduling:
1. From the navigation panel, go to General >Aiprotection Pro
> Parental Controls > Time Scheduling.
2. From the Enable Time Scheduling pane, click ON.
3. From the Client Name column, select or key in the client’s
name from the dropdown list box.
NOTE: You may also key in the client’s MAC address in the Client
MAC Address column. Ensure that the client name does not contain
special characters or spaces as these may cause the router to
function abnormally.
4. Click to add the client’s profile.
5. Click Apply to save the settings.
36
3.4 Game Acceleration
37
3.4.1 Triple-level game acceleration
GT-AC2900 offers Triple-level game acceleration to ensure the best
game connections and performance.
• Gaming Port Prioritization
Simply connecting the gaming device to the gaming port (at
GT-AC2900:LAN1) to get the first priority of the traffic.
ROG First is a ASUS ROG Motherboard utility in Game first V,
which can work with ASUS ROG gaming routers.
• Game Packet Prioritization
This feature allows you to enable Game Boost with one click.
When Game Boost is enabled, ROG Rapture gaming router puts
the gaming packet as the top priority to provide you with the
best gaming experience.
• Game Server Acceleration
The wtfast-powered Gamers Private Network (GPNTM) reduces
your average game latency and helps reduce flux spikes and
packet losses with your connection. For more information,
please go to 3.4.3 Game Private Network.
38
3.4.2 QoS
This feature ensures bandwidth for prioritized tasks and apps.
To enable the QoS function:
1. From the navigation panel, go to General > Game
Acceleration > QoS tab.
2. From the Enable QoS pane, click ON.
3. Fill in the upload and download bandwidth fields.
NOTE: Get the bandwidth information from your ISP. You can also go
to http://speedtest.net to check and get your bandwidth.
4. Select the QoS Type (Adaptive, Traditional or Bandwidth
limiter) for your configuration.
NOTE: Refer to the QoS tab for the definition of the QoS Type.
5. Click Apply.
39
GeForce NOW QoS
GeForce NOW QoS mode is a unique QoS mode for NVIDIA cloud
gaming service GeForce NOW enabled devices (e.g. Nvidia shield
TV). By enabling GeForce NOW QoS mode, the router will reserve
the required bandwidth, wireless mode, and QoS priority for
GeForce NOW enabled devices defined by Nvidia.
To enable GeForce NOW Qos:
1. Go to Game Acceleration > QoS, tick the Enable QoS button,
and then choose the QoS type GeForce NOW.
2. Enable Geforce NOW QoS UPnP control.
Select “Yes”. GeForce NOW QoS mode will be enabled
automatically when Geforce NOW enabled devices are
detected by the router.
3. Set the desired upload/download bandwidth. Get the
bandwidth information from ISP or use online services to
check your bandwidth.
4. Click Apply to save your configuration.
40
3.4.3 Game Private Network
The wtfast-powered Gamers Private Network (GPNTM) reduces
your average game latency and helps reduce flux spikes and
packet losses with your connection. You can enjoy a faster,
smoother, and more responsive connection with virtually all MMO
games.
To update the firmware:
1. Launch the web browser and key in
http://router.asus.com, enter the router’s default login name
and password (admin/admin) to enter ASUSWRT GUI.
2. Go to Administration > Firmware Upgrade and click Check
and follow the onscreen instructions to upgrade the firmware.
You can also download the latest firmware from
http://support.asus.com/ServiceHome.aspx to upgrade the
firmware manually.
41
To use wtfast:
1. From the navigation panel, go to General > Game
Acceleration > wtfast.
2. Create a free wtfast account via https://www.wtfast.com/.
3. Log into the wtfast account.
4. From the wtfast Rules list, create the profile for the device that
you want to use wtfast GPN on.
5. Select a GPN server according to your location or select “Auto”
and “Apply” settings.
6. Enable GPN profile BEFORE you launch the game.
NOTE: Free account supports one device, if you would like to
upgrade to multiple devices, click Upgrade to make subscription.
42
3.5 Open NAT
When playing PC or console games, there may be some
connection issues due to the ISP or router settings in your
environment such as NAT and port blocks. Open NAT helps
ensure that ROG Rapture gaming router is not blocking the game
connection.
To use Open NAT:
1. From the navigation panel, go to General > Open NAT and
turn on Enable port forwarding.
2. Choose a game from the game list, which will be updated from
time to time.
43
3. Tick the platform you want to use.
4. Fill in your device IP address in the Internal IP field.
5. Click OK and then click Apply.
Notes:
• If you want to set up port forwarding rules for FTP server or other
services, please go to WAN > Virtual server/Port Forwarding (see
section 4.5.4).
• Ifthegameyouwanttoplaydoesnotincludeinthegameprofile,
click and then select Manual to create a rule.
44
3.6 Game Radar
Game Radar is a diagnostic tool that helps you identify the
connection quality of servers for specific games.
To use Game Radar:
1. From the navigation panel, go to General > Game Radar and
select a game from the game list.
2. Check the Ping Status of each server.
3. For a smooth online gaming experience, select a game server
with low ping status.
45
3.7 WiFi Radar
Wi-Fi Radar, an advanced analysis tool for your wireless
network, delves deep into the channels and packet data for
troubleshooting.
NOTE: Enabling WiFi Radar may result to a drop wireless
performance. Only enable Wi-Fi Radar when needed.
To use WiFi Radar:
1. Go to Settings and configure all the WiFi Radar parameters,
1. From the navigation panel, go to General > WiFi Radar and
set the schedule for data recording.
46
2. Click Start Data Collection.
3. Click Submit after you set all the parameters.
3.7.1 WiFi Site Survey
WiFi Site Survey allows you to search for wireless networks in your
environment.
47
3.7.2 Wireless Channel Statistics
This feature shows channel usage of all bands and channel
distribution statistics in your environment.
3.7.3 Advanced Troubleshooting
This feature shows WiFi glitch statistics in your environment.
48
3.8 VPN
A virtual private network (VPN) provides a secure communication
with a remote computer or network over a public network such as
the Internet.
NOTE: Before setting up a VPN connection, you would need the IP
address or domain name of the VPN server.
To set up access to a VPN server:
1. From the navigation panel, go to General > VPN.
2. On the Enable PPTP VPN Server field, select ON.
3. On the VPN Details dropdown list, select Advanced Settings
to configure the advanced VPN settings such as broadcast support,
authentication, MPPE Encryption, and Client IP address range.
4. On the Network Place (Samba) Support field, select Yes.
5. Enter the user name and password for accessing the VPN
server. Click .
6. Click Apply.
49
3.8.1 VPN Fusion
VPN Fusion allows you to connect to multiple VPN servers
simultaneously and assign your client devices to connect to
different VPN tunnels. Some devices like set-top boxes, smart TVs
and Blu-ray players do not support VPN software. This feature
provides VPN access to such devices in a home network without
having to install VPN software, while your smartphone remains
connected to Internet not VPN. For Gamer, VPN connection
counteracts DDoS attacks to prevent your PC game or your stream
from disconnecting with game servers. Building a VPN connection
also can simply change your IP address to the region where
the game server is located, to improve your ping time to game
servers.
To start, please follow the steps below:
1. Click the “+” button beside Server List to add a new VPN
tunnel.
2. Activate the VPN connection you created in Server List.
3. Click the “+” button beside Exception List and select the online
client you want to configure.
4. Assign a VPN connection to the client device, and click OK.
5. Activate the VPN policy in Exception List, and click Apply at
the bottom of the page.
50
51
3.9 TracAnalyzer
Traffic Analyzer gives you an at-a-glance view of what’s happening
on your network on a daily, weekly, or monthly basis. It lets you
to quickly see each user’s bandwidth usage or the device or
app used, helping you reduce the bottlenecks in your Internet
connection. It’s also a great way to monitor the users’ Internet
usage or activities.
ToconguretheTracanalyzer:
1. From the navigation panel, go to General > TracAnalyzer.
2. From the TracAnalyzer main page, turn on traffic analyzer
statistic.
3. Select the date whose chart you want to display.
4. On the Display for field, select Router or Apps to display the
traffic information.
5. On the Show by field, select how you want to display the traffic
information.
52
4 Configuring the Advanced
Settings
4.1 Using the Network Map
Network Map allows you to configure your network’s security
settings, manage your network clients, and monitor your USB
device.
53
4.1.1 Setting up the wireless security settings
To protect your wireless network from unauthorized access, you
need to configure its security settings.
To set up the wireless security settings:
1. From the navigation panel, go to Advanced Settings >
Network Map.
2. OntheNetworkMapscreenandunderSystem status, you can
configurethewirelesssecuritysettingssuchasSSID,security
level, and encryption settings.
NOTE: You can set up different wireless security settings for 2.4GHz
and 5GHz bands.
2.4GHz security settings 5GHz security settings
3. On the Wireless name (SSID) field, key in a unique name for
your wireless network.
4. FromtheAuthentication Method dropdown list, select the
authentication method for your wireless network.
IfyouselectWPA-PersonalorWPA-2Personalasthe
authenticationmethod,keyintheWPA-PSKkeyorsecurity
passkey.
54
IMPORTANT! The IEEE 802.11n/ac standard prohibits using High
Throughput with WEP or WPA-TKIP as the unicast cipher. If you use
these encryption methods, your data rate will drop to IEEE 802.11g
54Mbps connection.
5 Click Apply when done.
4.1.2 Managing your network clients
To manage your network clients:
1. From the navigation panel, go to Advanced Settings >
Network Map tab.
2. On the Network Map screen, select the Clients icon to display
your network client’s information.
3. Click View List below the Clients icon to display all the clients.
4. To block a client’s access to your network, select the client and
click the open lock icon.
55
4.1.3 Monitoring your USB device
TheASUSwirelessrouterprovidestwoUSBportsforconnecting
USBdevicesorUSBprintertoallowyoutosharefilesandprinter
with clients in your network.
NOTES:
• Tousethisfeature,youneedtoplugaUSBstoragedevice,such
as a USB hard disk or USB flash drive, to the USB 3.0/2.0 ports on
the rear panel of your wireless router. Ensure that the USB storage
device is formatted and partitioned properly. Refer to the Plug-
n-Share Disk Support List at http://event.asus.com/networks/
disksupport
• TheUSBportssupporttwoUSBdrivesoroneprinterandoneUSB
drive at the same time.
IMPORTANT! You first need to create a share account and its
permission /access rights to allow other network clients to access
the USB device via an FTP site/third-party FTP client utility, Servers
Center, Samba, or AiCloud. For more details, refer to the section 4.6
Using the USB Application and 4.7 Using AiCloud 2.0 in this user
manual.
56
To monitor your USB device:
1. From the navigation panel, go to Advanced Settings >
Network Map.
2. OntheNetworkMapscreen,selecttheUSB Disk Status icon
todisplayyourUSBdevice’sinformation.
3. OntheAiDiskWizardfield,clickGOtosetupanFTPserverfor
Internet file sharing.
NOTES:
• Formoredetails,refertothesection4.6.2 Using Servers Center
in this user manual.
• ThewirelessrouterworkswithmostUSBHDDs/Flashdisks(upto
4TB size) and supports read-write access for FAT16, FAT32, NTFS,
and HFS+.
Safely removing the USB disk
IMPORTANT: Incorrect removal of the USB disk may cause data
corruption.
To safely remove the USB disk:
1. From the navigation panel, go to Advanced Settings >
Network Map.
2. In the upper right corner, click > Eject USB disk. When
the USB disk is ejected successfully, the USB status shows
Unmounted.
57
4.1.4 ASUS AiMesh
4.1.4.1 Before setting
PreparingtosetupanAiMeshWi-Fisystem
1. Two (2) ASUS routers (models supporting AiMesh:
https://www.asus.com/AiMesh/).
2. Assign one as AiMesh router, and another one as AiMesh node.
NOTE: If you have multiple AiMesh routers, we recommend using
the router with the highest specifications as your AiMesh router and
the others as AiMesh nodes.
AiMesh routerAiMesh node
4.1.4.2 AiMesh Setup steps
Prepare
Place your AiMesh router and node within 1-3 meters of each
other during the setup process.
AiMesh node
Factory default status. Keep power on and standby for AiMesh
system settings.
within
1-3 meters
AiMesh routerAiMesh node
58
AiMesh router
1)
Refer to the other router Quick Start Guide to connect
your AiMesh router to your PC and modem, and then log in
into the web GUI.
AiMesh routerModem AiMesh node
Logout/Reboot
AiMesh Router
2)
Go to Network Map page, click AiMesh icon and then
Search for your extending AiMesh node.
NOTE:
If you cannot find the AiMesh icon here, click on firmware
version and update the firmware.
59
Successfully added RT-ABCDE to your AiMesh system, it will
take awhile to show up as connected in the AiMesh router list.
OK
3)
Click Search, it will automatically search for your AiMesh
node. When the AiMesh node shows on this page, click it to
add it into the AiMesh system.
NOTE:
If you cannot find any AiMesh node, please go to
TROUBLE SHOOTING.
4)
A message is displayed when synchronization is completed.
5)
Congratulations! You will find the pages below show up
when an AiMesh node has been successfully added to the
AiMesh network.
60
4.1.4.3 Troubleshooting
If your AiMesh router cannot find any AiMesh node nearby or
synchronization fails, please check followings and try again.
1) Move your AiMesh node closer to the AiMesh router ideally.
Ensure it is within 1-3 meters.
2) Y
our AiMesh node is powered on
.
3)
Your AiMesh node is upgraded to AiMesh supported
firmware.
i. Download AiMesh - supported fireware at:
https://www.asus.com/AiMesh/
ii. Power on your AiMesh node and connect it to your PC via a
network cable.
iii. Launch a web GUI. You will be redirected to the ASUS Setup
Wizard. If not, navigate to http://router.asus.com
iv. Go to Administration > Firmware Upgrade. Click on
Choose File, and upload the AiMesh-supported firmware.
v. After firmware uploaded, please go to Network Map page to
confirm whether AiMesh icon showed up.
vi.
Press the reset button on your AiMesh node for at least 5
seconds. Release the reset button when the power LED
is flashing slowly.
61
4.1.4.4 Relocation
The best performance:
Locate your AiMesh node and router at the best place.
NOTES:
• To minimize interference, keep the routers away from devices
like cordless phones, Bluetooth devices and microwave ovens.
• We recommend that you place the routers in an open or
spacious location.
4.1.4.5 FAQ (Frequently Asked Questions)
Q1: Does the AiMesh router support Access Point mode?
A: Yes. You can choose to set the AiMesh router as router mode
or access point mode. Please go to web GUI (http://router.asus.
com), and go to the page Administration > Operation Mode.
Q2: Could I setup wired connection between AiMesh routers
(Ethernet backhaul)?
A: Yes. AiMesh system supports both wireless and wired
connection between AiMesh router and node to maximize
throughput and stability. AiMesh analyzes the wireless
signal strength for each frequency band available, and
then determines automatically whether a wireless or wired
connection is best to serve as the inter-router connection
backbone.
62
1) Follow the setup steps to establish a connection between the
AiMesh router and node via Wi-Fi first.
2)
Place the node in the ideal locations for best coverage. Run
an Ethernet cable from the LAN port of the AiMesh router
to the WAN port of AiMesh node
.
3)
AiMesh system will auto-select the best path for data
transmission, whether wired or wireless.
63
4.2 Wireless
4.2.1 General
The General tab allows you to configure the basic wireless
settings.
To configure the basic wireless settings:
1. From the navigation panel, go to Advanced Settings >
Wireless > General tab.
2. Select 2.4GHz or 5GHz as the frequency band for your wireless
network.
3. If you want to use the Smart Connect function, move the
slider to ON in the Enable Smart Connect field. This function
automatically connect the clients in your network to the
appropriate band 2.4GHz or 5GHz for optimal speed.
64
4. Assign a unique name containing up to 32 characters for your
SSID (Service Set Identifier) or network name to identify your
wireless network. Wi-Fi devices can identify and connect to
the wireless network via your assigned SSID. The SSIDs on the
information banner are updated once new SSIDs are saved to
the settings.
NOTE: You can assign unique SSIDs for the 2.4 GHz and 5GHz
frequency bands.
5. In the Hide SSID field, select Yes to prevent wireless devices
from detecting your SSID. When this function is enabled, you
would need to enter the SSID manually on the wireless device
to access the wireless network.
6. Select any of these wireless mode options to determine the
types of wireless devices that can connect to your wireless
router:
• Auto: Select Auto to allow 802.11ac, 802.11n, 802.11g, and
802.11b devices to connect to the wireless router.
• N only: Select N only to maximize wireless N performance.
This setting prevents 802.11g and 802.11b devices from
connecting to the wireless router.
• Legacy: Select Legacy to allow 802.11b/g/n devices to
connect to the wireless router. Hardware that supports
802.11n natively, however, will only run at a maximum speed
of 54Mbps.
7. Select the operating/control channel for your wireless router.
Select Auto to allow the wireless router to automatically select
the channel that has the least amount of interference.
8. Select the channel bandwidth to accommodate higher
transmission speeds.
9. Select the authentication method.
10. When done, click Apply.
65
4.2.2 WPS
WPS (Wi-Fi Protected Setup) is a wireless security standard that
allows you to easily connect devices to a wireless network. You
can configure the WPS function via the PIN code or WPS button.
NOTE: Ensure that the devices support WPS.
To enable WPS on your wireless network:
1. From the navigation panel, go to Advanced Settings >
Wireless > WPS tab.
2. In the Enable WPS field, move the slider to ON.
3. WPS uses 2.4GHz by default. If you want to change the
frequency to 5GHz, turn OFF the WPS function, click Switch
Frequency in the Current Frequency field, and turn WPS ON
again.
NOTE: WPS supports authentication using Open System, WPA-
Personal, and WPA2-Personal. WPS does not support a wireless
network that uses a Shared Key, WPA-Enterprise, WPA2-Enterprise,
and RADIUS encryption method.
66
4. In the WPS Method field, select Push Button or Client PIN
code. If you select Push Button, go to step 5. If you select
Client PIN code, go to step 6.
5. To set up WPS using the router’s WPS button, follow these
steps:
a. Click Start or press the WPS button found at the rear of the
wireless router.
b. Press the WPS button on your wireless device. This is
normally identified by the WPS logo.
NOTE: Check your wireless device or its user manual for the location
of the WPS button.
c. The wireless router will scan for any available WPS devices.
If the wireless router does not find any WPS devices, it will
switch to standby mode.
6. To set up WPS using the Client’s PIN code, follow these steps:
a. Locate the WPS PIN code on your wireless device’s user
manual or on the device itself.
b. Key in the Client PIN code on the text box.
c. Click Start to put your wireless router into WPS survey mode.
The router’s LED indicators quickly flash three times until the
WPS setup is completed.
67
4.2.3 Bridge
Bridge or WDS (Wireless Distribution System) allows your ASUS
wireless router to connect to another wireless access point
exclusively, preventing other wireless devices or stations to access
your ASUS wireless router. It can also be considered as a wireless
repeater where your ASUS wireless router communicates with
another access point and other wireless devices.
To set up the wireless bridge:
1. From the navigation panel, go to Advanced Settings >
Wireless > WDS tab.
2. Select the frequency band for the wireless bridge.
68
3. In the AP Mode field, select any of these options:
• APOnly: Disables the Wireless Bridge function.
• WDSOnly: Enables the Wireless Bridge feature but prevents
other wireless devices/stations from connecting to the
router.
• HYBRID: Enables the Wireless Bridge feature and allows
other wireless devices/stations to connect to the router.
NOTE: In Hybrid mode, wireless devices connected to the ASUS
wireless router will only receive half the connection speed of the
Access Point.
4. In the Connect to APs in list field, click Yes if you want to
connect to an Access Point listed in the Remote AP List.
5. By default, the operating/control channel for the wireless
bridge is set to Auto to allow the router to automatically select
the channel with the least amount of interference.
You can modify the Control Channel from Advanced Settings
> Wireless > General tab.
NOTE: Channel availability varies per country or region.
6. On the Remote AP List, key in a MAC address and click the Add
button to enter the MAC address of other available Access
Points.
NOTE: Any Access Point added to the list should be on the same
Control Channel as the ASUS wireless router.
7. Click Apply.
69
4.2.4 Wireless MAC Filter
Wireless MAC filter provides control over packets transmitted to
a specified MAC (Media Access Control) address on your wireless
network.
To set up the Wireless MAC filter:
1. From the navigation panel, go to Advanced Settings >
Wireless > Wireless MAC Filter tab.
2. Tick Yes in the Enable Mac Filter field.
3. In the MAC Filter Mode dropdown list, select either Accept or
Reject.
• SelectAccept to allow devices in the MAC filter list to access
to the wireless network.
• SelectReject to prevent devices in the MAC filter list to
access to the wireless network.
4. On the MAC filter list, click the Add button and key in the
MAC address of the wireless device.
5. Click Apply.
70
4.2.5 RADIUS Setting
RADIUS (Remote Authentication Dial In User Service) Setting
provides an extra layer of security when you choose WPA-
Enterprise, WPA2-Enterprise, or Radius with 802.1x as your
Authentication Mode.
To set up wireless RADIUS settings:
1. Ensure that the wireless router’s authentication mode is set to
WPA-Enterprise or WPA2-Enterprise.
NOTE: Please refer to section 4.2.1 General for configuring your
wireless router’s Authentication Mode.
2. From the navigation panel, go to Advanced Settings >
Wireless > RADIUS Setting.
3. Select the frequency band.
4. In the Server IP Address field, key in your RADIUS server’s IP
Address.
5. In the Server Port field, key in the server port.
6. In the Connection Secret field, assign the password to access
your RADIUS server.
7. Click Apply.
71
In the Professional Settings screen, you can configure the
following:
• Frequency: Select the frequency band that the professional
settings will be applied to.
• Enable Radio: Select Yes to enable wireless networking.
Select No to disable wireless networking.
• Date to Enable Radio (weekdays): You can specify which
days of the week wireless networking is enabled.
• Time of Day to Enable Radio: You can specify a time range
when wireless networking is enabled during the week.
• Date to Enable Radio (weekend): You can specify which
days of the weekend wireless networking is enabled.
4.2.6 Professional
The Professional screen provides advanced configuration options.
NOTE: We recommend that you use the default values on this page.
72
• Time of Day to Enable Radio: You can specify a time range
when wireless networking is enabled during the weekend.
• Set AP isolated: The Set AP isolated item prevents wireless
devices on your network from communicating with each
other. This feature is useful if many guests frequently join or
leave your network. Select Yes to enable this feature or select
No to disable.
• Roaming Assistant: In network configurations that involve
multiple Access, Points or wireless repeater, wireless clients
sometimes cannot connect automatically to thefts available
AP because they are still connected to the main wireless
router. Enable this setting so that the client will disconnect
from the main wireless router if the signal strength is under a
specific threshold and connect to a stronger signal.
• Enable IGMP Snooping: Enable this function allows
the IGMP ( Internet Group Management Protocol ) to be
monitored among devices and optimizes wireless multicast
traffic.
• Multicast rate (Mbps): Select the multicast transmission
rate or click Disable to switch off simultaneous single
transmission.
• Preamble Type: Preamble Type defines the length of time
that the router spent for CRC (Cyclic Redundancy Check). CRC
is a method of detecting errors during data transmission.
Select Short for a busy wireless network with high network
traffic. Select Long if your wireless network is composed of
older or legacy wireless devices.
• AMPDU RTS: Enable this function allows to build a group
of frames before they are transmitted and use RTS for every
AMPDU for communication among 802.11g and 802.11b
devices.
• RTS Threshold: Select a lower value for RTS (Request to
Send) Threshold to improve wireless communication in a
busy or noisy wireless network with high network traffic and
numerous wireless devices.
• DTIM Interval: DTIM (Delivery Traffic Indication Message)
Interval or Data Beacon Rate is the time interval before a
signal is sent to a wireless device in sleep mode indicating
that a data packet is awaiting delivery. The default value is
73
three milliseconds.
• Beacon Interval: Beacon Interval is the time between one
DTIM and the next. The default value is 100 milliseconds.
Lower the Beacon Interval value for an unstable wireless
connection or for roaming devices.
• Enable TX Bursting: Enable TX Bursting improves
transmission speed between the wireless router and 802.11g
devices.
• Enable WMM APSD: Enable WMM APSD (Wi-Fi Multimedia
Automatic Power Save Delivery) to improve power
management between wireless devices. Select Disable to
switch off WMM APSD.
• Reducing USB 3.0 interference: Enable this function
ensures the best wireless performance on the 2.4 GHz band.
Disabling this feature increase USB 3.0 port’s transmission
speed and may affect the 2.4 GHz wireless range.
• Optimize AMPDU aggregation: Optimize the max number
of MPDUs in an AMPDU and avoid packets get lost or
corrupted during transmission in error-prone wireless
channels
• Optimize ack suppression: Optimize the max number of
ack to suppress in a raw.
• Turbo QAM: Enable this function allows to support 256-QAM
(MCS 8/9) on the 2.4GHz band to achieve better range and
throughput on that frequency.
• Airtime Fairness: With airtime fairness, the speed of
the network is not determined by the slowest traffic. By
allocating time equally among clients, Airtime Fairness allows
every transmission to move at its highest potential speed.
• Explicit Beamforming: The client’s WLAN adapter and router
both support beam forming technology. This technology
allows these device to communicate the channel estimation
and steering direction to each other to improve download
and uplink speed.
• Universal Beamforming: For legacy wireless network
adapter that do not support beam forming, the router
estimates the channel and determines the steering direction
to improve the downlink speed.
74
4.3 Creating a Guest Network
The Guest Network provides temporary visitors with Internet
connectivity via access to separate SSIDs or networks without
providing access to your private network.
NOTE: GT-AC2900 supports up to six SSIDs (three 2.4GHz, and three
5GHz).
To create a guest network:
1. From the navigation panel, go to Advanced Settings > Guest
Network.
2. On the Guest Network screen, select 2.4GHz or 5GHz frequency
band for the guest network that you want to create.
3. Click Enable.
4. To change a guest’s settings, click the guest settings you want
to modify. Click Remove to delete the guest’s settings.
5. Assign a wireless name for your temporary network on the
Network Name (SSID) field.
75
6. Select an Authentication Method.
7. If you select a WPA authentication method, select a WPA
Encryption.
8. Specify the Access time or choose Limitless.
9. Select Disable or Enable on the Access Intranet item.
10. When done, click Apply.
76
4.4 LAN
4.4.1 LAN IP
The LAN IP screen allows you to modify the LAN IP settings of your
wireless router.
NOTE: Any changes to the LAN IP address will be reflected on your
DHCP settings.
To modify the LAN IP settings:
1. From the navigation panel, go to Advanced Settings > LAN >
LAN IP tab.
2. Modify the IP address and Subnet Mask.
3. When done, click Apply.
77
4.4.2 DHCP Server
Your wireless router uses DHCP to assign IP addresses
automatically on your network. You can specify the IP address
range and lease time for the clients on your network.
To configure the DHCP server:
1. From the navigation panel, go to Advanced Settings > LAN >
DHCP Server tab.
2. In the Enable the DHCP Server field, tick Yes.
3. In the Domain Name text box, enter a domain name for the
wireless router.
4. In the IP Pool Starting Address field, key in the starting IP
address.
5. In the IP Pool Ending Address field, key in the ending IP
address.
78
6. In the Lease Time field, specify in seconds when an assigned
IP address will expire. Once it reaches this time limit, the DHCP
server will then assign a new IP address.
NOTES:
• We recommend that you use an IP address format of 192.168.1.xxx
(where xxx can be any number between 2 and 254) when
specifying an IP address range.
• AnIPPoolStartingAddressshouldnotbegreaterthantheIPPool
Ending Address.
7. In the DNS and Server Settings section, key in your DNS
Server and WINS Server IP address if needed.
8. Your wireless router can also manually assign IP addresses to
devices on the network. On the Enable Manual Assignment
field, choose Yes to assign an IP address to specific MAC
addresses on the network. Up to 32 MAC Addresses can be
added to the DHCP list for manual assignment.
79
4.4.3 Route
If your network makes use of more than one wireless router, you
can configure a routing table to share the same Internet service.
NOTE: We recommend that you do not change the default route
settings unless you have advanced knowledge of routing tables.
To configure the LAN Routing table:
1. From the navigation panel, go to Advanced Settings > LAN >
Route tab.
2. On the Enable static routes field, choose Yes.
3. On the Static Route List, enter the network information of
other access points or nodes. Click the Add or Delete
button to add or remove a device on the list.
4. Click Apply.
80
4.4.4 IPTV
The wireless router supports connection to IPTV services through
an ISP or a LAN. The IPTV tab provides the configuration settings
needed to set up IPTV, VoIP, multicasting, and UDP for your
service. Contact your ISP for specific information regarding your
service.
81
4.5 WAN
4.5.1 Internet Connection
The Internet Connection screen allows you to configure the
settings of various WAN connection types.
To configure the WAN connection settings:
1. From the navigation panel, go to Advanced Settings > WAN >
Internet Connection tab.
2. Configure the following settings below. When done, click
Apply.
• WAN Connection Type: Choose your Internet Service
Provider type. The choices are Automatic IP, PPPoE, PPTP,
L2TP or static IP. Consult your ISP if the router is unable
to obtain a valid IP address or if you are unsure the WAN
connection type.
82
• Enable WAN: Select Yes to allow the router Internet access.
Select No to disable Internet access.
• Enable NAT: NAT (Network Address Translation) is a system
where one public IP (WAN IP) is used to provide Internet
access to network clients with a private IP address in a LAN.
The private IP address of each network client is saved in a NAT
table and is used to route incoming data packets.
• Enable UPnP: UPnP (Universal Plug and Play) allows several
devices (such as routers, televisions, stereo systems, game
consoles, and cellular phone), to be controlled via an IP-based
network with or without a central control through a gateway.
UPnP connects PCs of all form factors, providing a seamless
network for remote configuration and data transfer. Using
UPnP, a new network device is discovered automatically.
Once connected to the network, devices can be remotely
configured to support P2P applications, interactive gaming,
video conferencing, and web or proxy servers. Unlike Port
forwarding, which involves manually configuring port
settings, UPnP automatically configures the router to accept
incoming connections and direct requests to a specific PC on
the local network.
• Connect to DNS Server automatically: Allows this router to
get the DNS IP address from the ISP automatically. A DNS is a
host on the Internet that translates Internet names to numeric
IP addresses.
• Authentication: This item may be specified by some ISPs.
Check with your ISP and fill them in if required.
• Host Name: This field allows you to provide a host name for
your router. It is usually a special requirement from your ISP.
If your ISP assigned a host name to your computer, enter the
host name here.
83
• MAC Address: MAC (Media Access Control) address is a
unique identifier for your networking device. Some ISPs
monitor the MAC address of networking devices that connect
to their service and reject any unrecognized device that
attempt to connect. To avoid connection issues due to an
unregistered MAC address, you can:
• ContactyourISPandupdatetheMACaddressassociated
with your ISP service.
• CloneorchangetheMACaddressoftheASUSwirelessrouter
to match the MAC address of the previous networking device
recognized by the ISP.
• DHCP query frequency: Changes the DHCP Discovery
interval settings to avoid overloading the DHCP server.
84
4.5.2 Dual WAN
Your ASUS wireless router provides dual WAN support. You can set
the dual WAN feature to any of these two modes:
• Failover Mode: Select this mode to use the secondary WAN as
the backup network access.
• Load Balance Mode: Select this mode to optimize bandwidth,
minimize response time and prevent data overload for both
primary and secondary WAN connections.
85
4.5.3 Port Trigger
Port range triggering opens a predetermined incoming port for a
limited period of time whenever a client on the local area network
makes an outgoing connection to a specified port. Port triggering
is used in the following scenarios:
• More than one local client needs port forwarding for the
same application at a different time.
• An application requires specific incoming ports that are
different from the outgoing ports.
To set up Port Trigger:
1. From the navigation panel, go to Advanced Settings > WAN >
Port Trigger tab.
2. On the Enable Port Trigger field, tick Yes.
3. On the Well-Known Applications field, select the popular
games and web services to add to the Port Trigger List.
86
4. On the Trigger Port List table, key in the following
information:
• Description: Enter a short name or description for the
service.
• Trigger Port: Specify a trigger port to open the incoming
port.
• Protocol: Select the protocol, TCP, or UDP.
• Incoming Port: Specify an incoming port to receive inbound
data from the Internet.
• Protocol: Select the protocol, TCP, or UDP.
5. Click the Add to enter the port trigger information to the
list. Click the Delete button to remove a port trigger entry
from the list.
6. When done, click Apply.
NOTES:
• WhenconnectingtoanIRCserver,aclientPCmakesanoutgoing
connection using the trigger port range 66660-7000. The IRC
server responds by verifying the username and creating a new
connection to the client PC using an incoming port.
• IfPortTriggerisdisabled,therouterdropstheconnection
because it is unable to determine which PC is requesting for
IRC access. When Port Trigger is enabled, the router assigns an
incoming port to receive the inbound data. This incoming port
closes once a specific time period has elapsed because the router
is unsure when the application has been terminated.
• Porttriggeringonlyallowsoneclientinthenetworktousea
particular service and a specific incoming port at the same time.
• Youcannotusethesameapplicationtotriggeraportinmore
than one PC at the same time. The router will only forward the
port back to the last computer to send the router a request/
trigger.
87
4.5.4 Virtual Server/Port Forwarding
Port forwarding is a method to direct network traffic from the
Internet to a specific port or a specific range of ports to a device
or number of devices on your local network. Setting up Port
Forwarding on your router allows PCs outside the network to
access specific services provided by a PC in your network.
To set up Port Forwarding:
1. From the navigation panel, go to Advanced Settings > WAN >
Virtual Server / Port Forwarding tab.
2. On the Enable Port Forwarding field, tick Yes.
3. On the Famous Server List field, select the type of service you
want to access.
4. On the Famous Game List field, select the popular game that
you want to access. This item lists the port required for your
selected popular online game to work properly.
88
5. On the Port Forwarding List table, key in the following
information:
• Service Name: Enter a service name.
• Port Range: If you want to specify a Port Range for clients
on the same network, enter the Service Name, the Port
Range (e.g. 10200:10300), the LAN IP address, and leave the
Local Port empty. Port range accepts various formats such
as Port Range (300:350), individual ports (566,789) or Mix
(1015:1024,3021).
NOTES:
• Whenyournetwork’sfirewallisdisabledandyouset80asthe
HTTP server’s port range for your WAN setup, then your http
server/web server would be in conflict with the router’s web user
interface.
• Anetworkmakesuseofportsinordertoexchangedata,with
each port assigned a port number and a specific task. For
example, port 80 is used for HTTP. A specific port can only be used
by one application or service at a time. Hence, two PCs attempting
to access data through the same port at the same time would fail.
For example, you cannot set up Port Forwarding for port 100 for
two PCs at the same time.
• Local IP: Key in the client’s LAN IP address.
NOTE: Use a static IP address for the local client to make port
forwarding work properly. Refer to section 4.4 LAN for information.
• Local Port: Enter a specific port to receive forwarded
packets. Leave this field blank if you want the incoming
packets to be redirected to the specified port range.
• Protocol: Select the protocol. If you are unsure, select BOTH.
6. Click the Add to enter the port trigger information to the
list. Click the Delete button to remove a port trigger entry
from the list.
7. When done, click Apply.
89
To check if Port Forwarding has been configured successfully:
• Ensure that your server or application is set up and running.
• You will need a client outside your LAN but has Internet
access (referred to as “Internet client”). This client should not
be connected to the ASUS router.
• On the Internet client, use the router’s WAN IP to access the
server. If port forwarding has been successful, you should be
able to access the files or applications.
Differences between port trigger and port forwarding:
• Port triggering will work even without setting up a specific
LAN IP address. Unlike port forwarding, which requires a
static LAN IP address, port triggering allows dynamic port
forwarding using the router. Predetermined port ranges are
configured to accept incoming connections for a limited
period of time. Port triggering allows multiple computers
to run applications that would normally require manually
forwarding the same ports to each PC on the network.
• Port triggering is more secure than port forwarding since the
incoming ports are not open all the time. They are opened
only when an application is making an outgoing connection
through the trigger port.
90
4.5.5 DMZ
Virtual DMZ exposes one client to the Internet, allowing this
client to receive all inbound packets directed to your Local Area
Network.
Inbound traffic from the Internet is usually discarded and routed
to a specific client only if port forwarding or a port trigger has
been configured on the network. In a DMZ configuration, one
network client receives all inbound packets.
Setting up DMZ on a network is useful when you need incoming
ports open or you want to host a domain, web, or e-mail server.
CAUTION: Opening all the ports on a client to the Internet makes
the network vulnerable to outside attacks. Please be aware of the
security risks involved in using DMZ.
To set up DMZ:
1. From the navigation panel, go to Advanced Settings > WAN >
DMZ tab.
2. Configure the setting below. When done, click Apply.
• IP address of Exposed Station: Key in the client’s LAN IP
address that will provide the DMZ service and be exposed
on the Internet. Ensure that the server client has a static IP
address.
To remove DMZ:
1. Delete the client’s LAN IP address from the IP Address of
Exposed Station text box.
2. When done, click Apply.
91
4.5.6 DDNS
Setting up DDNS (Dynamic DNS) allows you to access the router
from outside your network through the provided ASUS DDNS
Service or another DDNS service.
To set up DDNS:
1. From the navigation panel, go to Advanced Settings > WAN >
DDNS tab.
2. Configure the following settings below. When done, click
Apply.
• Enable the DDNS Client: Enable DDNS to access the ASUS
router via the DNS name rather than WAN IP address.
• Server and Host Name: Choose ASUS DDNS or other DDNS.
If you want to use ASUS DDNS, fill in the Host Name in the
format of xxx.asuscomm.com (xxx is your host name).
• If you want to use a different DDNS service, click FREE TRIAL
and register online first. Fill in the User Name or E-mail
Address and Password or DDNS Key fields.
• Enable wildcard: Enable wildcard if your DDNS service
requires one.
NOTES:
DDNS service will not work under these conditions:
• WhenthewirelessrouterisusingaprivateWANIPaddress
(192.168.x.x, 10.x.x.x, or 172.16.x.x), as indicated by a yellow text.
• TheroutermaybeonanetworkthatusesmultipleNATtables.
92
4.5.7 NAT Passthrough
NAT Passthrough allows a Virtual Private Network (VPN)
connection to pass through the router to the network clients.
PPTP Passthrough, L2TP Passthrough, IPsec Passthrough and RTSP
Passthrough are enabled by default.
To enable / disable the NAT Passthrough settings, go to the
Advanced Settings > WAN > NAT Passthrough tab. When done,
click Apply.
93
4.6 Using the USB Application
The USB Applications function provides AiDisk, Servers Center,
Network Printer Server and Download Master submenus.
IMPORTANT! To use the server functions, you need to insert a USB
storage device, such as a USB hard disk or USB flash drive, in the USB
2.0 port on the rear panel of your wireless router. Ensure that the USB
storage device is formatted and partitioned properly. Refer to the
ASUS website at http://event.asus.com/2009/networks/disksupport/
for the file system support table.
94
3. Select the access rights that you want to assign to the clients
accessing your shared data.
4.6.1 Using AiDisk
AiDisk allows you to share files stored on a connected USB device
through the Internet. AiDisk also assists you with setting up ASUS
DDNS and an FTP server.
To use AiDisk:
1. From the navigation panel, go to Advanced Settings > USB
application, then click the AiDisk icon.
2. From the Welcome to AiDisk wizard screen, click Go.
95
4. Create your domain name via the ASUS DDNS services, read
the Terms of Service and then select I will use the service and
accept the Terms of service and key in your domain name.
When done, click Next.
You can also select Skip ASUS DDNS settings and then click
Next to skip the DDNS setting.
5. Click Finish to complete the setting.
6. To access the FTP site that you created, launch a web browser
or a third-party FTP client utility and key in the ftp link
(ftp://<domain name>.asuscomm.com) you have previously
created.
96
4.6.2 Using Servers Center
Servers Center allows you to share the media files from the USB
disk via a Media Server directory, Samba share service, or FTP
share service. You can also configure other settings for the USB
disk in the Servers Center.
Using Media Server
Your wireless router allows DLNA-supported devices to access
multimedia files from the USB disk connected to your wireless
router.
NOTE: Before using the DLNA Media Server function, connect your
device to the router’s network.
To launch the Media Server setting page, go to Advanced
Settings > USB application > Media Services and Servers >
Media Servers tab. Refer to the following for the descriptions of
the fields:
• Enable iTunes Server?: Select ON/OFF to enable/disable the
iTunes Server.
• Enable DLNA Media Server: Select ON/OFF to enable/
disable the DLNA Media Server.
97
• Media Server Status: Displays the status of the media server.
• Media Server Path Setting: Select All Disks Shared or
Manual Media Server Path.
Using Network Place (Samba) Share service
Network Place (Samba) Share allows you to set up the accounts
and permissions for the Samba service.
To use Samba share:
1. From the navigation panel, go to Advanced Settings > USB
application > Media Services and Servers > Network Place
(Samba) Share / Cloud Disk tab.
NOTE: Network Place (Samba) Share is enabled by default.
98
To delete an existing account:
a) Select the account that you want to delete.
b) Click .
c) When prompted, click Delete to confirm the account
deletion.
To add a folder:
a) Click .
b) Enter the folder name, and click Add. The folder that you
created will be added to the folder list.
2. Follow the steps below to add, delete, or modify an account.
To create a new account:
a) Click to add new account.
b) In the Account and Password fields, key in the name and
password of your network client. Retype the password to
confirm. Click Add to add the account to the list.
99
3. From the list of folders, select the type of access permission
that you want to assign for specific folders:
• R/W: Select this option to assign read/write access.
• R: Select this option to assign read-only access.
• No: Select this option if you do not want to share a specific
file folder.
4. Click Apply to apply the changes.
Using the FTP Share service
FTP share enables an FTP server to share files from USB disk to
other devices via your local area network or via the Internet.
IMPORTANT:
• EnsurethatyousafelyremovetheUSBdisk.Incorrectremovalof
the USB disk may cause data corruption.
• TosafelyremovetheUSBdisk,refertothesectionSafely
removing the USB disk under 4.1.3 Monitoring your USB
device.
100
To use FTP Share service:
NOTE: Ensure that you have set up your FTP server through
AiDisk. For more details, refer to the section 4.6.1 Using AiDisk.
1. From the navigation panel, click Advanced Settings > USB
application > Media Services and Servers > FTP Share tab.
2. From the list of folders, select the type of access rights that you
want to assign for specific folders:
• R/W: Select to assign read/write access for a specific folder.
• W: Select to assign write only access for a specific folder.
• R: Select to assign read only access for a specific folder.
• No: Select this option if you do not want to share a specific
folder.
3. If you prefer, you can set the Allow anonymous login field to
ON.
4. In the Maximum number of concurrent connections field,
key in the number of devices that can simultaneously connect
to the FTP share server.
5. Click Apply to confirm the changes.
6. To access the FTP server, key in the ftp link
ftp://<hostname>.asuscomm.com and your user name and
password on a web browser or a third-party FTP utility.
101
4.6.3 3G/4G
3G/4G USB modems can be connected to the router to allow
Internet access.
NOTE: For a list of verified USB modems, please visit:
http://event.asus.com/2009/networks/3gsupport/
To set up 3G/4G internet access:
1. From the navigation panel, click Advanced Settings > USB
application > 3G/4G.
2. In the Enable USB Modem field, select Yes.
3. Set up the following:
• Location: Select your 3G/4G service provider’s location from
the dropdown list.
• ISP: Select your Internet Service Provider (ISP) from the
dropdown list.
• APN (Access Point Name) service (optional): Contact your
3G/4G service provider for detailed information.
• Dial Number and PIN code: The 3G/4G provider’s access
number and PIN code for connection.
NOTE: PIN code may vary from different providers.
• Username / Password: The username and password will be
provided by the 3G/4G network carrier.
• USB Adapter: Choose your USB 3G / 4G adapter from the
dropdown list. If you are not sure of your USB adapter’s
model or the model is not listed in the options, select Auto.
4. Click Apply.
NOTE: The router will reboot for the settings to take effect.
102
4.7 Using AiCloud 2.0
AiCloud 2.0 is a cloud service application that allows you to save,
sync, share, and access your files.
To use AiCloud 2.0:
1. From Google Play Store or Apple Store, download and install
the ASUS AiCloud app to your smart device.
2. Connect your smart device to your network. Follow the
instructions to complete the AiCloud setup process.
103
4.7.1 Cloud Disk
To create a cloud disk:
1. Insert a USB storage device into the wireless router.
2. Turn on Cloud Disk.
3. Go to https://router.asus.com and enter the router login
account and password. For better user experience, we
recommend that you use Google Chrome or Firefox.
104
4. You can now start accessing Cloud Disk files on devices
connected to the network.
NOTE: When accessing the devices that are connected to the
network, you need to enter the device’s user name and password
manually, which will not be saved by AiCloud for security reason.
105
4.7.2 Smart Access
The Smart Access function allows you to easily access your home
network via your router’s domain name.
NOTES:
• YoucancreateadomainnameforyourrouterwithASUSDDNS.
For more details, refer to section 4.5.6 DDNS.
• Bydefault,AiCloudprovidesasecureHTTPSconnection.Keyin
https://[yourASUSDDNSname].asuscomm.com for a very secure
Cloud Disk and Smart Access usage.
106
4.7.3 AiCloud Sync
To use AiCloud Sync:
1. Launch AiCloud, click AiCloud Sync > Go.
2. Select ON to enable AiCloud Sync.
3. Click Add new account.
4. Enter your ASUS WebStorage account password and select the
directory that you want to sync with WebStorage.
5. Click Apply.
107
4.8 IPv6
This wireless router supports IPv6 addressing, a system that
supports more IP addresses. This standard is not yet widely
available. Contact your ISP if your Internet service supports IPv6.
To set up IPv6:
1. From the navigation panel, go to Advanced Settings > IPv6.
2. Select your Connection Type. The configuration options vary
depending on your selected connection type.
3. Enter your IPv6 LAN and DNS settings.
4. Click Apply.
NOTE: Please refer to your ISP regarding specific IPv6 information for
your Internet service.
108
4.9 Firewall
The wireless router can serve as a hardware firewall for your
network.
NOTE: The Firewall feature is enabled by default.
4.9.1 General
To set up basic Firewall settings:
1. From the navigation panel, go to Advanced Settings >
Firewall > General tab.
2. On the Enable Firewall field, select Yes.
3. On the Enable DoS protection, select Yes to protect your
network from DoS (Denial of Service) attacks though this may
affect your router’s performance.
4. You can also monitor packets exchanged between the LAN
and WAN connection. On the Logged packets type, select
Dropped, Accepted, or Both.
5. Click Apply.
4.9.2 URL Filter
You can specify keywords or web addresses to prevent access to
specific URLs.
NOTE: The URL Filter is based on a DNS query. If a network client has
already accessed a website such as http://www.abcxxx.com, then
the website will not be blocked (a DNS cache in the system stores
previously visited websites). To resolve this issue, clear the DNS cache
before setting up the URL Filter.
To set up a URL filter:
1. From the navigation panel, go to Advanced Settings >
Firewall > URL Filter tab.
2. On the Enable URL Filter field, select Enabled.
3. Enter a URL and click the button.
4. Click Apply.
109
4.9.3 Keyword filter
Keyword filter blocks access to webpages containing specified
keywords.
To set up a keyword filter:
1. From the navigation panel, go to Advanced Settings >
Firewall > Keyword Filter tab.
2. On the Enable Keyword Filter field, select Enabled.
3. Enter a word or phrase and click the Add button.
4. Click Apply.
NOTES:
• The Keyword Filter is based on a DNS query. If a network client
has already accessed a website such as http://www.abcxxx.com,
then the website will not be blocked (a DNS cache in the system
stores previously visited websites). To resolve this issue, clear the
DNS cache before setting up the Keyword Filter.
• Web pages compressed using HTTP compression cannot be
filtered. HTTPS pages also cannot be blocked using a keyword
filter.
110
4.9.4 Network Services Filter
The Network Services Filter blocks LAN to WAN packet exchanges
and restricts network clients from accessing specific web services
such as Telnet or FTP.
To set up a Network Service filter:
1. From the navigation panel, go to Advanced Settings >
Firewall > Network Service Filter tab.
2. On the Enable Network Services Filter field, select Yes.
3. Select the Filter table type. Black List blocks the specified
network services. White List limits access to only the specified
network services.
4. Specify the day and time when the filters will be active.
5. To specify a Network Service to filter, enter the Source IP,
Destination IP, Port Range, and Protocol. Click the button.
6. Click Apply.
111
4.10 Administration
4.10.1 Operation Mode
The Operation Mode page allows you to select the appropriate
mode for your network.
To set up the operating mode:
1. From the navigation panel, go to Advanced Settings >
Administration > Operation Mode tab.
2. Select any of these operation modes:
• Wireless router mode (default): In wireless router mode,
the wireless router connects to the Internet and provides
Internet access to available devices on its own local network.
• Access Point mode: In this mode, the router creates a new
wireless network on an exising network.
• Media Bridge: This setup requires two wireless routers.
The second router serves as a media bridge where multiple
devices such as Smart TVs and gaming consoles can be
connected via ethernet.
• Repeater mode: In Repeater mode, GT-AC2900 wirelessly
connects to an existing wireless network to extend the
wireless coverage. In this mode, the firewall, IP sharing, and
NAT functions are disabled.
• AiMesh mode: This setup requires at least two ASUS routers
which support AiMesh. Enable AiMesh node, and log in
112
AiMesh router web UI to search for available AiMesh nodes
nearby to join your AiMesh system. AiMesh system provides
whole-home coverage and centralized management.
3. Click Apply.
NOTE: The router will reboot when you change the modes.
4.10.2 System
The System page allows you to configure your wireless router
settings.
To set up the System settings:
1. From the navigation panel, go to Advanced Settings >
Administration > System tab.
2. You can configure the following settings:
• Change router login password: You can change the
password and login name for the wireless router by entering
a new name and password.
• Time Zone: Select the time zone for your network.
• NTP Server: The wireless router can access a NTP (Network
time Protocol) server in order to synchronize the time.
• Enable Telnet: Click Yes to enable Telnet services on the
network. Click No to disable Telnet.
• Authentication Method: You can select HTTP, HTTPS, or
both protocols to secure router access.
• Enable Web Access from WAN: Select Yes to allow devices
outside the network to access the wireless router GUI
settings. Select No to prevent access.
• Allow only specified IP address: Click Yes if you want to
specify the IP addresses of devices that are allowed access to
the wireless router GUI settings from WAN.
• Client List: Enter the WAN IP addresses of networking
devices allowed to access the wireless router settings. This
list will be used if you clicked Yes in the Only allow specific
IP item.
3. Click Apply.
113
4.10.3 Firmware Upgrade
NOTE: Download the latest firmware from the ASUS website at
http://www.asus.com
To upgrade the firmware:
1. From the navigation panel, go to Advanced Settings >
Administration > Firmware Upgrade tab.
2. In the New Firmware File field, click Browse to locate the
downloaded file.
3. Click Upload.
NOTES:
• Whentheupgradeprocessiscomplete,waitforsometimeforthe
system to reboot.
• Iftheupgradeprocessfails,thewirelessrouterautomatically
enters rescue mode and the power LED indicator on the front
panel starts flashing slowly. To recover or restore the system, refer
to section 5.2 Firmware Restoration.
4.10.4 Restore/Save/Upload Setting
To restore/save/upload wireless router settings:
1. From the navigation panel, go to Advanced Settings >
Administration > Restore/Save/Upload Setting tab.
2. Select the tasks that you want to do:
• Torestoretothedefaultfactorysettings,clickRestore, and
click OK in the confirmation message.
• Tosavethecurrentsystemsettings,clickSave, navigate to
the folder where you intend to save the file and click Save.
• Torestorefromasavedsystemsettingsle,clickBrowse to
locate your file, then click Upload.
NOTE: If issues occur, upload the latest firmware version and
configure new settings. Do not restore the router to its default
settings.
114
4.11 System Log
System Log contains your recorded network activities.
NOTE: System log resets when the router is rebooted or powered
off.
To view your system log:
1. From the navigation panel, go to Advanced Settings >
System Log.
2. You can view your network activities in any of these tabs:
• GeneralLog
• DHCPLeases
• WirelessLog
• PortForwarding
• RoutingTable
115
4.12 Smart Connect
Smart Connect is designed to automatically steer clients to one of
three radios (one 2.4 GHz, one lowband 5 GHz, one high-band 5
GHz) to maximize total wireless throughput use.
4.12.1 Setting up Smart Connect
You can enable Smart Connect from the Web GUI through the
following two ways:
• Via the Wireless screen
1. On your web browser, manually key in the wireless router’s
default IP address: http://router.asus.com.
2. On the login page, key in the default user name (admin)
and password (admin) and click OK. The QIS page launches
automatically.
3. From the navigation panel, go to Advanced Settings >
Wireless > General tab.
4. Move the slider to ON in the Enable Smart Connect field. This
function automatically connect the clients in your network to
the appropriate band for optimal speed.
116
4.12.2 Smart Connect Rule
ASUSWRT provides default condition settings to trigger switching
mechanism. You can also change the trigger conditions according
to your networking surroundings. To change the settings, go to
the Smart Connect Rule tab on the Network Tools screen.
Smart Connect Rule controls are divided into four sections:
• SteeringTriggerCondition
• STASelectionPolicy
• InterfaceSelectandQualifyProcedures
• BounceDetect
117
Steering Trigger Condition
This set of controls sets the criteria to initiate band steering.
• BandwidthUtilization
When bandwidth use exceeds this percentage, steering will be
initiated.
• EnableLoadBalance
This controls load balancing.
• RSSI
If the received signal level of any associated client meets this
criteria, steering will be triggered.
• PHYRateLess/PHYRateGreater
These controls determine STA link rates that trigger band
steering.
• VHT
This controls determines how 802.11ac and non-ac clients are
handled.
• ALL (default) means any type of client can trigger steering.
• AC only means a client must support 802.11ac to trigger
steering.
• Not-allowed means only non-802.11ac clients will trigger
steering, i.e. 802.11a/b/g/n.
118
STA Selection Policy
Once steering has been triggered, ASUSWRT will follow the STA
Selection Policy to select a client(STA) that is going to be steered
to the most appropriate band.
Interface Select and Qualify Procedures
These controls determine where the steered client will end up. The
Target Band controls specify first and second choice of steering
targets. Clients meeting the STA selection policy criteria for the
radio will be steered to the first target if that radio’s Bandwidth
Utilization is less than the set value. Otherwise, the client will be
sent to the second Target Band radio.
Bounce Detect
This set of controls determines how often a client can be steered.
This is intended to prevent clients from constantly moving around.
It does not, however, prevent clients from disconnecting on their
own, or counting them as bounces if they do. Each client can be
steered N Counts within the Window Time. When the Count limit
is hit, the client will not be steered again for Dwell Time.
119
5 Utilities
NOTES:
• Downloadandinstallthewirelessrouter'sutilitiesfromtheASUS
website:
• DeviceDiscoveryv1.4.7.1athttp://dlcdnet.asus.com/pub/ASUS/
LiveUpdate/Release/Wireless/Discovery.zip
• FirmwareRestorationv1.9.0.4athttp://dlcdnet.asus.com/pub/
ASUS/LiveUpdate/Release/Wireless/Rescue.zip
• WindowsPrinterUtilityv1.0.5.5athttp://dlcdnet.asus.com/pub/
ASUS/LiveUpdate/Release/Wireless/Printer.zip
• TheutilitiesarenotsupportedonMACOS.
5.1 Device Discovery
Device Discovery is an ASUS WLAN utility that detects an ASUS
wireless router device, and allows you to configure the wireless
networking settings.
To launch the Device Discovery utility:
• Fromyourcomputer’sdesktop,click
Start > All Programs > ASUS Utility > ASUS Wireless Router
> Device Discovery.
NOTE: When you set the router to Access Point mode, you need to
use Device Discovery to get the router’s IP address.
120
5.2 Firmware Restoration
Firmware Restoration is used on an ASUS Wireless Router that
failed during its firmware upgrading process. It uploads the
firmware that you specify. The process takes about three to four
minutes.
IMPORTANT: Launch the rescue mode on the router before using
the Firmware Restoration utility.
NOTE: This feature is not supported on MAC OS.
To launch the rescue mode and use the Firmware Restoration
utility:
1. Unplug the wireless router from the power source.
2. Hold the Reset button at the rear panel and simultaneously
replug the wireless router into the power source. Release the
Reset button when the Power LED at the front panel flashes
slowly, which indicates that the wireless router is in the rescue
mode.
121
3. Set a static IP on your computer and use the following to set up
your TCP/IP settings:
IP address: 192.168.1.x
Subnet mask: 255.255.255.0
4. From your computer’s desktop, click
Start > All Programs > ASUS Utility GT-AC2900 Wireless
Router > Firmware Restoration.
5. Specify a firmware file, then click Upload.
NOTE: This is not a firmware upgrade utility and cannot be used on
a working ASUS Wireless Router. Normal firmware upgrades must be
done through the web interface. Refer to Chapter 4: Configuring
the Advanced Settings for more details.
5.3 Setting up your printer server
5.3.1 ASUS EZ Printer Sharing
ASUS EZ Printing Sharing utility allows you to connect a USB
printer to your wireless router’s USB port and set up the print
server. This allows your network clients to print and scan files
wirelessly.
122
NOTE: The print server function is supported on Windows®
7/8/8.1/10.
To set up the EZ Printer sharing mode:
1. From the navigation panel, go to Advanced Settings > USB
Application > Network Printer Server.
2. Click Download Now! to download the network printer utility.
NOTE: Network printer utility is supported on Windows® 7/8/8.1/10.
To install the utility on Mac OS, select Use LPR protocol for sharing
printer.
3. Unzip the downloaded file and click the Printer icon to run the
network printer setup program.
123
4. Follow the onscreen instructions to set up your hardware, then
click Next.
5. Wait a few minutes for the initial setup to finish. Click Next.
6. Click Finish to complete the installation.
7. Follow the Windows® OS instructions to install the printer
driver.
124
8. After the printer’s driver installation is complete, network
clients can now use the printer.
125
5.3.2 Using LPR to Share Printer
You can share your printer with computers running on Windows®
and MAC operating system using LPR/LPD (Line Printer Remote/
Line Printer Daemon).
Sharing your LPR printer
To share your LPR printer:
1. From the Windows® desktop, click Start > Devices and
Printers > Add a printer to run the Add Printer Wizard.
2. Select Add a local printer and then click Next.
126
3. Select Create a new port then set Type of Port to Standard
TCP/IP Port. Click New Port.
4. In the Hostname or IP address field, key in the IP address of
the wireless router then click Next.
127
5. Select Custom then click Settings.
6. Set Protocol to LPR. In the Queue Name field, key in
LPRServer then click OK to continue.
128
7. Click Next to finish setting up the standard TCP/IP port.
8. Install the printer driver from the vendor-model list. If your
printer is not in the list, click Have Disk to manually install the
printer drivers from a CD-ROM or file.
129
9. Click Next to accept the default name for the printer.
10. Click Finish to complete the installation.
130
5.4 Download Master
Download Master is a utility that helps you download files even
while your laptops or other devices are switched off.
NOTE: You need a USB device connected to the wireless router to use
Download Master.
To use Download Master:
1. Click Advanced Settings > USB application > Download
Master to download and install the utility automatically.
NOTE: If you have more than one USB drive, select the USB device
you want to download the files to.
2. After the download process is finished, click the Download
Master icon to start using the utility.
3. Click Add to add a download task.
4. Select a download type such as BitTorrent, HTTP, or FTP. Provide
a torrent file or a URL to begin downloading.
NOTE: For details on Bit Torrent, refer to section 5.4.1 Configuring
the Bit Torrent download settings.
131
5. Use the navigation panel to configure the advanced settings.
To configure BitTorrent download settings:
1. From Download Master’s navigation panel, click Bit Torrent to
launch the Bit Torrent Setting page.
2. Select a specific port for your download task.
3. To prevent network congestion, you can limit the maximum
upload and download speeds under Speed Limits.
4. You can limit the maximum number of allowed peers and
enable or disable file encryption during downloads.
5.4.1 Configuring Bit Torrent download settings
132
5.4.2 NZB settings
You can set up a USENET server to download NZB files. After
entering USENET settings, Apply.
133
6 Troubleshooting
This chapter provides solutions for issues you may encounter with
your router. If you encounter problems that are not mentioned in
this chapter, visit the ASUS support site at:
https://www.asus.com/support for more product information and
contact details of ASUS Technical Support.
6.1 Basic Troubleshooting
If you are having problems with your router, try these basic steps
in this section before looking for further solutions.
Upgrade Firmware to the latest version.
1. Launch the Web GUI. Go to Advanced Settings >
Administration > Firmware Upgrade tab. Click Check to
verify if the latest firmware is available.
2. If the latest firmware is available, visit the ASUS global website
at https://www.asus.com/Networking/ROG-Rapture-GT-
AC2900/HelpDesk_BIOS/ to download the latest firmware.
3. From the Firmware Upgrade page, click Browse to locate the
firmware file.
4. Click Upload to upgrade the firmware.
Restart your network in the following sequence:
1. Turn off the modem.
2. Unplug the modem.
3. Turn off the router and computers.
4. Plug in the modem.
5. Turn on the modem and then wait for 2 minutes.
6. Turn on the router and then wait for 2 minutes.
7. Turn on computers.
134
Check if your Ethernet cables are plugged properly.
• WhentheEthernetcableconnectingtherouterwiththe
modem is plugged in properly, the WAN LED will be on.
• WhentheEthernetcableconnectingyourpowered-
on computer with the router is plugged in properly, the
corresponding LAN LED will be on.
Check if the wireless setting on your computer matches that
of your computer.
• Whenyouconnectyourcomputertotherouterwirelessly,
ensure that the SSID (wireless network name), encryption
mehtod, and password are correct.
Check if your network settings are correct.
• EachclientonthenetworkshouldhaveavalidIPaddress.
ASUS recommends that you use the wireless router’s DHCP
server to assign IP addresses to computers on your network.
• Somecablemodemserviceprovidersrequireyoutouse
the MAC address of the computer initially registered on
the account. You can view the MAC address in the web GUI,
Network Map > Clients page, and hover the mouse pointer
over your device in Client Status.
135
6.2 Frequently Asked Questions (FAQs)
I cannot access the router GUI using a web browser
• Ifyourcomputeriswired,checktheEthernetcableconnection
and LED status as described in the previous section.
• Ensurethatyouareusingthecorrectlogininformation.The
default factory login name and password is “admin/admin”.
Ensure that the Caps Lock key is disabled when you enter the
login information.
• Deletethecookiesandlesinyourwebbrowser.ForInternet
Explorer 8, follow these steps:
1. Launch Internet Explorer 8,
then click Tools > Internet
Options.
2. In the General tab,
under Browsing history,
click Delete…, select
Temporary Internet Files
and Cookies then click
Delete.
NOTES:
• Thecommandsfordeletingcookiesandfilesvarywithweb
browsers.
• Disableproxyserversettings,cancelthedial-upconnection,and
set the TCP/IP settings to obtain IP addresses automatically. For
more details, refer to Chapter 1 of this user manual.
• EnsurethatyouuseCAT5eorCAT6ethernetcables.
136
The client cannot establish a wireless connection with the
router.
NOTE: If you are having issues connecting to 5GHz network, make
sure that your wireless device supports 5GHz or features dual band
capabilities.
• OutofRange:
• Movetherouterclosertothewirelessclient.
• Trytoadjustantennasoftheroutertothebestdirection
as described in section 1.5 Positioning your router.
• DHCPserverhasbeendisabled:
1. Launch the web GUI. Go to Advanced Settings >
Network Map> Clients and search for the device that you
want to connect to the router.
2. If you cannot find the device in the Network Map, go to
Advanced Settings > LAN > DHCP Server, Basic Config
list, select Yes on the Enable the DHCP Server.
137
• SSIDhasbeenhidden.IfyourdevicecanndSSIDsfromother
routers but cannot find your router’s SSID, go to Advanced
Settings > Wireless > General, select No on Hide SSID, and
select Auto on Control Channel.
• IfyouareusingawirelessLANadapter,checkifthewireless
channel in use conforms to the channels available in your
country/area. If not, adjust the channel, channel bandwidth,
and wireless mode.
• Ifyoustillcannotconnecttotherouterwirelessly,youcan
reset your router to factory default settings. In the router
GUI,click Administration > Restore/Save/Upload Setting and
click Restore.
138
Internet is not accessible.
• CheckifyourroutercanconnecttoyourISP’sWANIPaddress.
To do this, launch the web GUI and go to Advanced Settings>
Network Map, and check the Internet Status.
• IfyourroutercannotconnecttoyourISP’sWANIPaddress,
try restarting your network as described in the section
Restart your network in following sequence under Basic
Troubleshooting.
• ThedevicehasbeenblockedviatheParentalControlfunction.
Go to General > Aiprotection Pro > Parental Controls tab
and see if the device is in the list. If the device is listed under
Client Name, remove the device using the Delete button or
adjust the Time Management Settings.
• IfthereisstillnoInternetaccess,trytorebootyourcomputer
and verify the network’s IP address and gateway address.
• CheckthestatusindicatorsontheADSLmodemandthe
wireless router. If the WAN LED on the wireless router is not ON,
check if all cables are plugged properly.
You forgot the SSID (network name) or network password
• SetupanewSSIDandencryptionkeyviaawiredconnection
(Ethernet cable). Launch the web GUI, go to Network Map,
click the router icon, enter a new SSID and encryption key, and
then click Apply.
• Resetyourroutertothedefaultsettings.LaunchthewebGUI,
go to Administration > Restore/Save/Upload Setting, and
click Restore. The default login account and password are both
“admin”.
139
How to restore the system to its default settings?
• GotoAdministration > Restore/Save/Upload Setting, and
click Restore.
The following are the factory default settings:
User Name: admin
Password: admin
Enable DHCP: Yes (if WAN cable is plugged in)
IP address: http://router.asus.com (or 192.168.1.1)
Domain Name: (Blank)
Subnet Mask: 255.255.255.0
DNS Server 1: 192.168.1.1
DNS Server 2: (Blank)
SSID (2.4GHz): ASUS
SSID (5GHz): ASUS_5G
Firmware upgrade failed.
Launch the rescue mode and run the Firmware Restoration utility.
Refer to section 5.2 Firmware Restoration on how to use the
Firmware Restoration utility.
140
Cannot access Web GUI
A. Disable the proxy server, if enabled.
Windows® 7
1. Click Start > Internet Explorer
to launch the browser.
2. Click Tools > Internet options
> Connections tab > LAN
settings.
Before configuring your wireless router, do the steps described in
this section for your host computer and network clients.
3. From the Local Area
Network (LAN) Settings
screen, untick Use a proxy
server for your LAN.
4. Click OK when done.
141
MAC OS
1. From your Safari
browser, click Safari
> Preferences >
Advanced > Change
Settings...
2. From the Network
screen, deselect FTP
Proxy and Web Proxy
(HTTP).
3. Cllick Apply Now when
done.
NOTE: Refer to your browser's help feature for details on disabling
the proxy server.
B. Set the TCP/IP settings to automatically obtain an IP
address.
Windows® 7
1. Click Start > Control Panel
> Network and Internet
> Network and Sharing
Center > Manage network
connections.
2. Select Internet Protocol
Version 4 (TCP/IPv4) or
Internet Protocol Version
6 (TCP/IPv6), then click
Properties.
142
3. To obtain the IPv4 IP
settings automatically,
tick Obtain an IP address
automatically.
To obtain the IPv6 IP
settings automatically, tick
Obtain an IPv6 address
automatically.
4. Click OK when done.
MAC OS
1. Click the Apple icon
located on the top left of
your screen.
2. Click System
Preferences > Network
> Configure...
3. From the TCP/IP tab,
select Using DHCP in
the Configure IPv4
dropdown list.
4. Cllick Apply Now when
done.
NOTE: Refer to your operating system’s help and support feature for
details on configuring your computer’s TCP/IP settings.
143
C. Disable the dial-up connection, if enabled.
Windows® 7
1. Click Start > Internet Explorer
to launch the browser.
2. Click Tools > Internet options
> Connections tab.
3. Tick Never dial a connection.
4. Click OK when done.
NOTE: Refer to your browser's help feature for details on disabling
the dial-up connection.
144
Appendices
Notices
ASUS Recycling/Takeback Services
ASUS recycling and takeback programs come from our commitment to the highest
standards for protecting our environment. We believe in providing solutions for you
to be able to responsibly recycle our products, batteries, other components, as well as
the packaging materials. Please go to http://csr.asus.com/english/Takeback.htm for the
detailed recycling information in different regions.
REACH
Complying with the REACH (Registration, Evaluation, Authorisation, and Restriction
of Chemicals) regulatory framework, we published the chemical substances in our
products at ASUS REACH website at http://csr.asus.com/english/REACH.htm
Federal Communications Commission Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions:
• Thisdevicemaynotcauseharmfulinterference.
• Thisdevicemustacceptanyinterferencereceived,includinginterferencethat
may cause undesired operation.
This equipment has been tested and found to comply with the limits for a class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
• Reorientorrelocatethereceivingantenna.
• Increasetheseparationbetweentheequipmentandreceiver.
• Connecttheequipmentintoanoutletonacircuitdierentfromthattowhichthe
receiver is connected.
• Consultthedealeroranexperiencedradio/TVtechnicianforhelp.
WARNING! Any changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the equipment.
Prohibition of Co-location
This device and its antenna(s) must not be co-located or operating in conjunction with
any other antenna or transmitter.
145
IMPORTANT NOTE:
Radiation Exposure Statement: This equipment complies with FCC radiation exposure
limits set forth for an uncontrolled environment. End users must follow the specific
operating instructions for satisfying RF exposure compliance. To maintain compliance
with FCC exposure compliance requirement, please follow operation instruction as
documented in this manual.
WARNING! This equipment must be installed and operated in accordance with
provided instructions and the antenna(s) used for this transmitter must be installed
to provide a separation distance of at least 20 cm from all persons and must not be
co-located or operating in conjunction with any other antenna or transmitter.
Safety Notices
• Use this product in environments with ambient temperatures between 0°C(32°F)
and 40°C(104°F).
• Refertotheratinglabelonthebottomofyourproductandensureyourpower
adapter complies with this rating.
• DONOTplaceonunevenorunstableworksurfaces.Seekservicingifthecasinghas
been damaged.
• DONOTplaceordropobjectsontopanddonotshoveanyforeignobjectsintothe
product.
• DONOTexposetoorusenearliquids,rain,ormoisture.DONOTusethemodem
during electrical storms.
• DONOTcovertheventsontheproducttopreventthesystemfromgetting
overheated.
• DONOTusedamagedpowercords,accessories,orotherperipherals.
• IftheAdapterisbroken,donottrytofixitbyyourself.Contactaqualifiedservice
technician or your retailer.
• Topreventelectricalshockhazard,disconnectthepowercablefromtheelectrical
outlet before relocating the system.
Safety Notices
• Utilisezceproduitdansunenvironnementdontlatempératureambianteest
comprise entre 0˚C (32°F) et 40˚C (104°F).
• Référez-vousàl'étiquettesituéeaudessousduproduitpourvérifierque
l'adaptateursecteurrépondauxexigencesdetension.
• NEPASplacersurunesurfaceirrégulièreouinstable.Contactezleserviceaprès-
ventesilechâssisaétéendommagé.
• NEPASplacer,fairetomberouinsérerd'objetssur/dansleproduit.
• NEPASexposerl'appareilàlapluieouàl'humidité,tenez-leàdistancedesliquides.
NE PAS utiliser le modem lors d'un orage.
• NEPASbloquerlesouverturesdestinéesàlaventilationdusystèmepouréviterque
celui-ci ne surchauffe.
146
• NEPASutiliserdecordonsd'alimentation,d'accessoiresouautrespériphériques
endommagés.
• Sil'adaptateurestendommagé,n'essayezpasdeleréparervous-même.Contactez
untechnicienélectriquequalifiéouvotrerevendeur.
• Pourévitertoutrisquedechocélectrique,débranchezlecâbled'alimentationdela
priseélectriqueavantdetoucherausystème.
Radiation Exposure Statement
Déclaration d'exposition aux radiations
This equipment complies with IC radiation exposure limits set forth for an uncontrolled
environment. This equipment should be installed and operated with minimum distance
31cm between the radiator & your body.
Cetéquipementestconformeauxlimitesd’expositionauxrayonnementsICétablies
pourunenvironnementnoncontrôlé.Cetéquipementdoitêtreinstalléetutiliséavec
un minimum de 31cm de distance entre la source de rayonnement et votre corps.
This device contains licence-exempt transmitter(s)/receiver(s) that comply with
Innovation, Science and Economic Development Canada’s licence-exempt RSS(s).
Operation is subject to the following two conditions:
(1) This device may not cause interference.
(2) This device must accept any interference, including interference that may cause
undesired operation of the device.
Cet appareil contient des émetteurs / récepteurs exempts de licence qui sont conformes au (x)
RSS (s) exemptés de licence d’Innovation, Sciences et Développement économique Canada.
L’opération est soumise aux deux conditions suivantes:
(1) Cet appareil ne doit pas provoquer d’interférences.
(2) Cet appareil doit accepter toute interférence, y compris les interférences susceptibles de
provoquer un fonctionnement indésirable de l’appareil.
This radio transmitter [IC: 3568A-RTHR00] has been approved by Innovation, Science
and Economic Development Canada to operate with the antenna types listed below,
with the maximum permissible gain indicated. Antenna types not included in this list
that have a gain greater than the maximum gain indicated for any type listed are strictly
prohibited for use with this device.
Le présent émetteur radio (IC: 3568A-RTHR00) a été approuvé par Innovation, Sciences et
Développement économique Canada pour fonctionner avec les types d’antenne énumérés
ci-dessous et ayant un gain admissible maximal d’antenne. Les types d’antennes non inclus
dans cette liste qui ont un gain supérieur au gain maximal indiqué pour tout type listé sont
strictement interdits pour une utilisation avec cet appareil.
147
Set Ant. Port Brand P/N Type Connector Gain (dBi)
2.4
GHz
5GHz
B1/B2
5GHz
B3
5GHz
B4
2.4
GHz
5GHz
B1/B2
5GHz
B3
5GHz
B4
1
1 1 - 4 4 WHA YU C660-510413-A Dipole Reverse SMA Plug 1.9 - 2.3 1.9
2 2 - 3 3 WHA YU C660-510413-A Dipole Reverse SMA Plug 1.9 - 2.3 1.9
3 3 - 2 2 WHA YU C660-510413-A Dipole Reverse SMA Plug 1.9 - 2.3 1.9
4 4 - 1 1 WHA YU C660-510413-A Dipole Reverse SMA Plug 1.9 - 2.3 1.9
5 - 1 - - WHA YU C660-510413-A Dipole Reverse SMA Plug - 2.3 - -
6 - 2 - - WHA YU C660-510413-A Dipole Reverse SMA Plug - 2.3 - -
7 - 3 - - WHA YU C660-510413-A Dipole Reverse SMA Plug - 2.3 - -
8 - 4 - - WHA YU C660-510413-A Dipole Reverse SMA Plug - 2.3 - -
2
1 1 - 4 4 WHA YU C660-510431-A Dipole Reverse SMA Plug 1.9 - 2.3 1.9
2 2 - 3 3 WHA YU C660-510431-A Dipole Reverse SMA Plug 1.9 - 2.3 1.9
3 3 - 2 2 WHA YU C660-510431-A Dipole Reverse SMA Plug 1.9 - 2.3 1.9
4 4 - 1 1 WHA YU C660-510431-A Dipole Reverse SMA Plug 1.9 - 2.3 1.9
5 - 1 - - WHA YU C660-510431-A Dipole Reverse SMA Plug - 2.3 - -
6 - 2 - - WHA YU C660-510431-A Dipole Reverse SMA Plug - 2.3 - -
7 - 3 - - WHA YU C660-510431-A Dipole Reverse SMA Plug - 2.3 - -
8 - 4 - - WHA YU C660-510431-A Dipole Reverse SMA Plug - 2.3 - -
3
1 1 - 4 4 PSA RFDPA161000
SBLB801 Dipole Reverse SMA Plug 1.9 - 2.3 1.9
2 2 - 3 PSA RFDPA161000
SBLB801 Dipole Reverse SMA Plug 1.9 - 2.3 1.9
3 3 - 2 2 PSA RFDPA161000
SBLB801 Dipole Reverse SMA Plug 1.9 - 2.3 1.9
4 4 - 1 1 PSA RFDPA161000
SBLB801 Dipole Reverse SMA Plug 1.9 - 2.3 1.9
5 - 1 - - PSA RFDPA161000
SBLB801 Dipole Reverse SMA Plug - 2.3 - -
6 - 2 - - PSA RFDPA161000
SBLB801 Dipole Reverse SMA Plug - 2.3 - -
7 - 3 - - PSA RFDPA161000
SBLB801 Dipole Reverse SMA Plug - 2.3 - -
8 - 4 - - PSA RFDPA161000
SBLB801 Dipole Reverse SMA Plug - 2.3 - -
Dynamic Frequency Selection (DFS) for devices operating in the bands 5250- 5350 MHz,
5470-5600 MHz and 5650-5725 MHz.
Sélection dynamique de fréquences (DFS) pour les dispositifs fonctionnant dans les bandes
5250-5350 MHz, 5470-5600 MHz et 5650-5725 MHz.
The device for operation in the band 5150–5250 MHz is only for indoor use to reduce the
potential for harmful interference to co-channel mobile satellite systems.
les dispositifs fonctionnant dans la bande 5150-5250 MHz sont réservés uniquement pour
une
utilisation à l’intérieur an de réduire les risques de brouillage préjudiciable aux systèmes de
satellites mobiles utilisant les mêmes canaux.
The maximum antenna gain permitted for devices in the bands 5250-5350 MHz and
5470-5725 MHz shall be such that the equipment still complies with the e.i.r.p. limit.
le gain maximal d’antenne permis pour les dispositifs utilisant les bandes 5250-5350 MHz et
5470-5725 MHz doit se conformer à la limite de p.i.r.e.
The maximum antenna gain permitted for devices in the band 5725-5850 MHz shall be
such that the equipment still complies with the e.i.r.p. limits specified for point-to-point
and non-point-to-point operation as appropriate.
le gain maximal d’antenne permis (pour les dispositifs utilisant la bande 5725-5850 MHz)
doit se conformer à la limite de p.i.r.e. spéciée pour l’exploitation point à point et non point
à point, selon le cas.
For indoor use only.
Pour une utilisation en intérieur uniquement.
148
IMPORTANT NOTE:
IC Radiation Exposure Statement:
This equipment complies with IC RSS-102 radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance 31cm between the radiator & your body.
Cet équipement est conforme aux limites d’exposition aux rayonnements IC établies pour un
environnement non contrôlé. Cet équipement doit être installé et utilisé avec un minimum de
31 cm de distance entre la source de rayonnement et votre corps.
VCCI: Japan Compliance Statement
この装置は、情報処理装置等電波障害自主規制協議会（ＶＣＣＩ）の基準
に基づくクラス B 情報技術装置です。この装置は、家庭環境で使用すること
を目的としていますが、ラジオやテレビジョン受信機に近接して使用され
ると、受信障害を引き起こすことがあります。
　取扱説明書に従って正しい取り扱をして下さい。
5.3GHz 帯*W53 (5,250-5,350MHz) は屋内利用に限定されています。
KC: Korea Warning Statement
B급 기기
(가정용 방송통신기자재)
이 기기는 가정용(B급)으로 전자파적합등록을 한
기기로서 주로 가정에서 사용하는 것을 목적으로
하며, 모든 지역에서 사용할 수 있습니다.
Class B equipment
(For Home Use Broadcasting &
Communication Equipment)
This equipment is home use (Class B) electromagnetic
wave suitability and to be used mainly at home and it
can be used in all areas.
149
單元
限用物質及其化學符號
鉛
(Pb)
汞
(Hg)
鎘
(Cd)
六價鉻
(Cr+6)
多溴聯苯
（PBB)
多溴二苯醚
（PBDE)
印刷電路板及電子組件
-
○ ○ ○ ○ ○
結構組件（金屬 / 塑膠） ○ ○ ○ ○ ○ ○
其他組件（如天線/ 指示燈/連接線） ○ ○ ○ ○ ○ ○
其他及其配件（如電源供應器）
-
○ ○ ○ ○ ○
備考1.“○”係指該項限用物質之百分比含量未超出百分比含量基準值。
備考2.“-”係指該項限用物質為排除項目。
「產品之限用物質含有情況」之相關資訊，請參考下表：
DFS 警語
操作在 5.15~5.35/5.47~5.85GHz 之無線資訊傳輸設備 (802.11a/ac 產品 )，應
避免影響附近雷達系統之操作。
MPE
本產品電磁波曝露量 (MPE) 標準值 1mW/cm2，送測產品實測值為 XXXmW/
cm2，建議使用時至少距離人體 XXcm。
安全說明：
- 請在溫度為 0°C (32°F) 至 40°C (104°F) 之間的環境中使用本產品。
- 請依照產品上的電源功率貼紙說明使用正確的電源變壓器，如果使用錯誤規格
的電源變壓器有可能會造成內部零件的損毀。
- 請勿將產品放置於不平坦或不穩定的表面，若產品的機殼毀損，請聯絡維修服
務人員。
- 請勿在產品上放置其他物品，請勿將任何物品塞入產品內，以避免引起元件短
路或電路損毀。
- 請保持機器在乾燥的環境下使用，雨水、溼氣、液體等含有礦物質將會腐蝕電
子線路，請勿在雷電天氣下使用數據機。
- 請勿堵塞產品的通風孔，以避免因散熱不良而導致系統過熱。
- 請勿使用破損的電源線、附件或其他周邊產品。
- 如果電源已毀損，請不要嘗試自行修復，請將其交給專業技術服務人員或經銷
商來處理。
- 為了防止電擊風險，在搬動主機之前，請先將電源線插頭暫時從電源插座上拔
除。
NCC 警語
經型式認證合格之低功率射頻電機，非經許可，公司、商號或使用者均不得擅自變
更頻率、加大功率或變更原設計之特性及功能。
低功率射頻電機之使用不得影響飛航安全及干擾合法通信；經發現有干擾現象時，
應立即停用，並改善至無干擾時方得繼續使用。
前項合法通信，指依電信法規定作業之無線電通信。
低功率射頻電機須忍受合法通信或工業、科學及醫療用電波輻射性電機設備之干
擾。
150
電子電氣產品有害物質限制使用標識要求：圖中之數字為產品之環保使
用期限。僅指電子電氣產品中含有的有害物質不致發生外洩或突變從而
對環境造成污染或對人身、財產造成嚴重損害的期限。
部件名稱
有害物質
鉛
(Pb) 汞(Hg) 鎘(Cd) 六價鉻
(Cr(VI))
多溴聯苯
(PBB)
多溴二苯醚
(PBDE)
印刷電路板及其電子組件 × ○ ○ ○ ○ ○
外殼 ○ ○ ○ ○ ○ ○
電源適配器 × ○ ○ ○ ○ ○
外部信號連接頭及線材 × ○ ○ ○ ○ ○
中央處理器與內存 × ○ ○ ○ ○ ○
本表格依據 SJ/T 11364 的規定編制。
○： 表示該有害物質在該部件所有均質材料中的含量均在 GB/T 26572 規定的限量要求以下。
×： 表示該有害物質至少在該部件的某一均質材料中的含量超出 GB/T 26572 規定的限量要
求，然該部件仍符合歐盟指令 2011/65/EU 的規范。
備註：此產品所標示之環保使用期限，係指在一般正常使用狀況下。
产品中有害物质的名称及含量
安全說明：
- 請在溫度為 0°C (32°F) 至 40°C (104°F)之間的環境中使用本產品。
- 請依照產品上的電源功率貼紙說明使用正確的電源適配器，如果試用錯誤規格
的電源適配器可能會造成內部零件的損壞。
- 請勿將產品放置於不平坦或不穩定的表面，若產品的外殼損壞，請聯繫
維修服務人員。
- 請勿在產品上放置其他物品，請勿將任何物品塞入產品內，以避免引起組件短
路或電路損壞。
- 請保持机器在干燥的環境下使用，雨水、濕氣、液体等含有礦物質會腐蝕電子
線路，請勿在雷電天气下使用調製解調器。
- 請勿堵塞產品的通風孔，以避免因散熱不良而導致系統過熱。
- 請勿使用破損的電源線、附件或其他周邊產品。
- 如果電源已損壞，請不要嘗試自行修復，請將其交給專業技術服務人員
或經銷商來處理。
- 為了防止電擊風險，在搬動主機前，請先將電源線插頭暫時從電源插座上拔
除。
UA.TR.028
151
Precautions for the use of the device
a. Pay particular attention to the personal safety when use this device in airports,
hospitals, gas stations and professional garages.
b. Medical device interference: Maintain a minimum distance of at least 15 cm (6
inches) between implanted medical devices and ASUS products in order to reduce
the risk of interference.
c. Kindly use ASUS products in good reception conditions in order to minimize the
radiation’s level.
d. Keep the device away from pregnant women and the lower abdomen of the
teenager.
Précautions d'emploi de l'appareil
a.Soyezparticulièrementvigilantquantàvotresécuritélorsdel'utilisationdecet
appareildanscertainslieux(lesavions,lesaéroports,leshôpitaux,lesstations-
service et les garages professionnels).
b.Évitezd'utilisercetappareilàproximitédedispositifsmédicauximplantés.Si
vousportezunimplantélectronique(stimulateurscardiaques,pompesàinsuline,
neurostimulateurs…),veuillezimpérativementrespecterunedistanceminimale
de15centimètresentrecetappareiletvotrecorpspourréduirelesrisques
d'interférence.
c.Utilisezcetappareildansdebonnesconditionsderéceptionpourminimiser
le niveau de rayonnement. Ce n'est pas toujours le cas dans certaines zones ou
situations, notamment dans les parkings souterrains, dans les ascenseurs, en train ou
envoitureoutoutsimplementdansunsecteurmalcouvertparleréseau.
d.Tenezcetappareilàdistancedesfemmesenceintesetdubas-ventredes
adolescents.
Условия эксплуатации:
- Температура эксплуатации устройства: 0-40 °C. Не используйте устройство в
условиях экстремально высоких или низких температур.
- Не размещайте устройство вблизи источников тепла, например, рядом с
микроволновой печью, духовым шкафом или радиатором.
- Использование несовместимого или несертифицированного адаптера питания
может привести к возгоранию, взрыву и прочим опасным последствиям.
- При подключении к сети электропитания устройство следует располагать
близко к розетке, к ней должен осуществляться беспрепятственный доступ.
- Утилизация устройства осуществляется в соответствии с местными законами
и положениями. Устройство по окончании срока службы должны быть
переданы в сертифицированный пункт сбора для вторичной переработки или
правильной утилизации.
- Данное устройство не предназначено для детей. Дети могут пользоваться
устройством только в присутствии взрослых.
- Не выбрасывайте устройство и его комплектующие вместе с обычными
бытовыми отходами.
152
India RoHS
This product complies with the "India E-Waste (Management) Rules, 2016" and prohibits
use of lead, mercury, hexavalent chromium, polybrominated biphenyls(PBBs) and
polybrominated diphenyl ethers (PBDEs) in concentrations exceeding 0.1 % by weight
in homogenous materials and 0.01 % by weight in homogenous materials for cadmium,
except for the exemptions listed in Schedule II of the Rule.
רצומב שומישל תוחיטב תוארוה
:רצומב שומיש תעב םיאבה תוחיטבה יללכ פ"ע לועפל שי
.למשחה לבכ וא/ו עקתה תוניקתו תומלש אדו •
.תובוטר םיידיב למשחה תשרמ עקתה תא איצוהל וא סינכהל ןיא •
,ןעטמה תא חותפל ןיא ,ינוציח ןעטמ י"ע לעפומ רצומה םאב •
.הבורקה תורישה תדבעמל תונפל שי ,יהשלכ היעב לש הרקמב
.םילזונמ ןעטמהו רצומה תא קיחרהל שי •
תידיימ וקתנל שי ,חוכ קפס/ןעטמב וא/ו רצומב םרוקמש םישער ,רזומ חיר לש הרקמב •
.תוריש תדבעמל תונפלו למשחה תשרמ
אלו ינוציח שומישל אל ,דבלב הנבמה ךותב שומישל דעוימ חוכ קפס/ןעטמהו רצומה •
.החל הביבסב שומישל
.למשחה לבכ תא םקעלו ,רובשל ,ךותחל ןיא •
לע רתי םמחתהל ול חינהל וא למשחה לבכ לע םיצפח חינהל ןיא •
.תולמשחתה וא הקילד ,קזנל םורגל לולע רבדה ןכש ,הדימה
.למשחה תשרמ וקתנל שי ןעטמה וא/ו רצומה יוקינ ינפל •
למשחה תשרמ הניזה ליתפ קותינו רוביחל החונ השיג רשפאל שי •
שומישל ןכומ ילועפת בצמב קותינה ןקתה תא קזחתלו דיפקהל שי •
:הרהזא
תולמשחתהל םורגל לולע יוקל רוביח ,םיירוקמ אל םיפילחתב הניזה לבכ תא ףילחהל ןיא •
.שמתשמה
.לבכבש הקראה ךילומ תוניקת אדוול שי ךיראמ לבכ לע שומישב •
153
AEEE Yönetmeliğine Uygundur. IEEE Yönetmeliğine Uygundur.
- Bu Cihaz Türkiye analog şebekelerde çalışabilecek şekilde tasarlanmıştır.
- Cihazın ayrıntılı kurulum rehberi kutu içeriğinden çıkan CD içerisindedir.
Cihazın kullanıcı arayüzü Türkçe’dir.
- Cihazın kullanılması planlanan ülkelerde herhangi bir kısıtlaması yoktur.
Ülkeler simgeler halinde kutu üzerinde belirtilmiştir.
Manufacturer ASUSTeK Computer Inc.
Tel: +886-2-2894-3447
Address: 4F, No. 150, LI-TE RD., PEITOU, TAIPEI 112,
TAIWAN
Authorised
representative in
Europe
ASUS Computer GmbH
Address: HARKORT STR. 21-23, 40880 RATINGEN,
GERMANY
Authorised
distributors in
Turkey
BOGAZICI BILGISAYAR TICARET VE SANAYI A.S.
Tel./FAX No.: +90 212 331 10 00 / +90 212 332 28 90
Address: ESENTEPE MAH. BUYUKDERE CAD. ERCAN
HAN B BLOK NO.121 SISLI, ISTANBUL 34394
CIZGI Elektronik San. Tic. Ltd. Sti.
Tel./FAX No.: +90 212 356 70 70 / +90 212 356 70 69
Address: GURSEL MAH. AKMAN SK.47B 1
KAGITHANE/ISTANBUL
KOYUNCU ELEKTRONiK BiLGi iSLEM SiST. SAN. VE
DIS TIC. A.S.
Tel. No.: +90 216 5288888
Address: EMEK MAH.ORDU CAD. NO:18, SARIGAZi,
SANCAKTEPE ISTANBUL
ENDEKS BİLİŞİM SAN VE DIŞ TİC LTD ŞTİ
Tel./FAX No.: +90 216 523 35 70 / +90 216 523 35 71
Address: NECIP FAZIL BULVARI, KEYAP CARSI SITESI,
G1 BLOK, NO:115 Y.DUDULLU, UMRANIYE,
ISTANBUL
PENTA TEKNOLOJI URUNLERI DAGITIM TICARET A.S
Tel./FAX No.: +90 216 528 0000
Address: ORGANIZE SANAYI BOLGESI NATO YOLU
4.CADDE NO:1 UMRANIYE, ISTANBUL 34775
154
ASUS Contact information
ASUSTeK COMPUTER INC. (Asia Pacific)
Address 15Li-TeRoad,Peitou,Taipei,Taiwan
11259
Website www.asus.com.tw
Technical Support
Telephone +886228943447
SupportFax +886228907698
Online support https://www.asus.com/support
ASUS COMPUTER INTERNATIONAL (America)
Address 48720KatoRd.,Fremont,CA94538,
USA
Telephone +15107393777
Fax +15106084555
Website usa.asus.com
Online support https://www.asus.com/support
ASUS COMPUTER GmbH (Germany and Austria)
Address HarkortStr.21-23,D-40880Ratingen,
Germany
SupportFax +49-2102-959931
Website asus.com/de
Onlinecontact eu-rma.asus.com/sales
Technical Support
Telephone(Component) +49-2102-5789555
Telephone Germany
(System/Notebook/Eee/LCD) +49-2102-5789557
Telephone Austria
(System/Notebook/Eee/LCD) +43-820-240513
SupportFax +49-2102-959911
Online support https://www.asus.com/support
Manufacturer: ASUSTeK Computer Inc.
Tel: +886-2-2894-3447
Address: 4F, No. 150, LI-TE RD., PEITOU, TAIPEI 112, TAIWAN
Authorised
representative
in Europe:
ASUS Computer GmbH
Address: HARKORT STR. 21-23, 40880 RATINGEN, GERMANY
155
Safety Notices
• Usethisproductinenvironmentswithambienttemperaturesbetween0°C(32°F)and40°C(104°F).
• Refertotheratinglabelonthebottomofyourproductandensureyourpoweradaptercomplieswith
this rating.
• DONOTplaceonunevenorunstableworksurfaces.Seekservicingifthecasinghasbeendamaged.
• DONOTplaceordropobjectsontopanddonotshoveanyforeignobjectsintotheproduct.
• DONOTexposetoorusenearliquids,rain,ormoisture.DONOTusethemodemduringelectrical
storms.
• DONOTcovertheventsontheproducttopreventthesystemfromgettingoverheated.
• DONOTusedamagedpowercords,accessories,orotherperipherals.
• IftheAdapterisbroken,donottrytofixitbyyourself.Contactaqualifiedservicetechnicianoryour
retailer.
• Topreventelectricalshockhazard,disconnectthepowercablefromtheelectricaloutletbefore
relocating the system.
• DONOTmountthisequipmenthigherthan2meters.
CE statement
Simplified EU Declaration of Conformity
ASUSTek Computer Inc. hereby declares that this device is in compliance with the essential requirements
and other relevant provisions of Directive 2014/53/EU. Full text of EU declaration of conformity is available
at https://www.asus.com/Networking/ROG-Rapture-GT-AC2900/HelpDesk_Declaration/.
Declaration of Conformity for Ecodesign directive 2009/125/EC
Testing for eco-design requirements according to (EC) No 1275/2008 and (EU) No 801/2013 has been
conducted. When the device is in Networked Standby Mode, its I/O and network interface are in sleep
mode and may not work properly. To wake up the device, press the Wi-Fi on/off, LED on/off, reset, or WPS
button.
This equipment complies with EU radiation exposure limits set forth for an uncontrolled environment. This
equipment should be installed and operated with minimum distance 20 cm between the radiator & your
body.
All operational modes:
2.4GHz: 802.11b, 802.11g, 802.11n (HT20), 802.11n (HT40), 802.11ac (VHT20), 802.11ac (VHT40)
5GHz: 802.11a, 802.11n (HT20), 802.11n (HT40), 802.11ac (VHT20), 802.11ac (VHT40), 802.11ac (VHT80)
The frequency, mode and the maximum transmitted power in EU are listed below:
2412-2472MHz (802.11g 6Mbps): 19.81 dBm
5180-5240MHz (802.11ac VHT20 MCS0): 20.1 dBm
5260-5320MHz (802.11ac VHT40 MCS0): 21.31 dBm
5500-5700MHz (802.11ac VHT80 MCS0): 27.48 dBm
The device is restricted to indoor use only when operating in the 5150 to 5350 MHz frequency range.
The adapter shall be installed near the equipment and shall be easily accessible.
English
AT BE BG CZ DK EE FR
DE IS IE IT EL ES CY
LV LI LT LU HU MT NL
NO PL PT RO SI SK TR
FI SE CH UK HR
156
Bulgarian
Safety Notices
• Използвайтетозипродуктпритемпературанаоколнатасредаот0°C(32°F)до40°C(104°F).
• ВижтеетикетанадолнатастрананаВашияпродуктисеуверете,чеВашиятадаптеротговаряна
изискванията.
• НЕпоставяйтевърхунеравниилинестабилниработниповърхности.Обърнетесекъмсервиз,
акокорпусътсеповреди.
• НЕпоставяйте,непускайтеотгореинепъхайтеникаквичуждипредметивпродукта.
• НЕизлагайтенаинеизползвайтевблизостдотечности,дъждиливлага.НЕизползвайтемодема
повременагръмотевичнибури.
• НЕпокривайтевентилационнитеотворинапродукта,задапредотвратитепрегряванена
системата.
• НЕизползвайтеповреденизахранващикабели,аксесоариилидругипериферниустройства.
• Акоадаптерътеповреден,несеопитвайтедагоремонтиратесами.Свържетесесквалифициран
техникилисВашиядоставчик.
• Задаизбегнетерискоттоковудар,изключетезахранващиякабелотелектрическатамрежа
преди да преместите системата.
• ТоваоборудванедаНЕсемонтиранависочинанад2метра.
CE statement
Опростена декларация за съответствие на ЕС
СнастоящотоASUSTeKComputerInc.декларира,четоваустройствоевсъответствиесъс
същественитеизискванияидругитеприложимипостановлениянаДиректива2014/53/EC.Пълният
текстнадекларациятазасъответствиенаЕСедостъпеннаадресhttps://www.asus.com/Networking/
ROG-Rapture-GT-AC2900/HelpDesk_Declaration/.
Декларация за съответствие за Директива за екодизайна 2009/125/ЕО
Проведенисатестовезасъвместимостсизискваниятазаекодизайнсъгласно(ЕО)No.1275/2008и
(ЕС)No.801/2013.КогатоустройствотоевNetworkedStandbyMode(Режимнаготовностнамрежа),
I/Oимрежовиятинтерфейссавспящрежимиможеданеработяткактотрябва.Задасъбудите
устройството, натиснете Wi-Fi on/off (Wi-Fi вкл./изкл.), LED on/off (LED вкл./изкл.), reset (нулиране) или
бутона WPS.
Товаустройствоевсъответствиесграницитезарадиочестотнооблъчване,установениотЕСза
неконтролирана среда. Това оборудване трябва да се инсталира и използва при разстояние най-
малко20cm20cmмеждуизлъчващототялоичовешкототяло.
Всичкирежиминаработа:
2.4GHz: 802.11b, 802.11g, 802.11n (HT20), 802.11n (HT40), 802.11ac (VHT20), 802.11ac (VHT40)
5GHz: 802.11a, 802.11n (HT20), 802.11n (HT40), 802.11ac (VHT20), 802.11ac (VHT40), 802.11ac
(VHT80)
По-долусапосоченичестотата,режимътимаксималнотопредаванозахранваневЕС.
2412-2472MHz (802.11g 6Mbps): 19.81 dBm
5180-5240MHz (802.11ac VHT20 MCS0): 20.1 dBm
5260-5320MHz (802.11ac VHT40 MCS0): 21.31 dBm
5500-5700MHz (802.11ac VHT80 MCS0): 27.48 dBm
Устройството е ограничено за използване в помещения единствено, когато оперира в честотен
диапазон от 5150 до 5350 MHz.
Адаптеръттрябвадасенамиравблизостдооборудванетоидабъделеснодостъпен.
AT BE BG CZ DK EE FR
DE IS IE IT EL ES CY
LV LI LT LU HU MT NL
NO PL PT RO SI SK TR
FI SE CH UK HR
157
Croatian
Safety Notices
• Ovajproizvodkoristiteuokruženjimastemperaturomokruženjaizmeđu0°C(32°F)i40°C(104
°F).
• Pogledajtenazivnuoznakunadonjemdijeluproizvodakakobisteprovjerilijeliadaptersukladan.
• NEpostavljajteuređajnaneravneinestabilneradnepovršine.Uslučajuoštećenjakućišta,zatražitepomoć
servisera.
• NEMOJTEpostavljatiilispuštatipredmetenagornjidiouređajainemojteumetatistranepredmeteu
proizvod.
• NEizlažiteineupotrebljavajteuređajublizinitekućina,kišeilivlage.NEMOJTEkoristitimodemtijekom
električneoluje.
• NEMOJTEprekrivatiotvorenaproizvodukakonebisteuzrokovalipregrijavanjesustava.
• Nemojtekoristitioštećenekabelezanapajanje,dodatnuopremuiostalevanjskeuređaje.
• Akojeadapteroštećen,nemojtegapopravljatisami.Obratitesekvalificiranomservisnomtehničaruili
dobavljaču.
• Kakobistespriječiliopasnostodelektričnogudara,iskopčajtekabelizelektričneutičniceprijepremještanja
sustava.
• NEMOJTEmontiratiovuopremunavisinivećojod2metra.
CE statement
Pojednostavljena EU Izjava o sukladnosti
ASUSTekComputerInc.ovimeizjavljujedajeuređajsukladansosnovnimzahtjevimaiostalimvažnim
odredbama direktive 2014/53/EU. Cijeli tekst EU izjave o sukladnosti dostupan je na https://www.asus.
com/Networking/ROG-Rapture-GT-AC2900/HelpDesk_Declaration/.
Izjava o sukladnosti za direktivu o ekodizajnu 2009/125/EZ
Provedeno je testiranje zahtjeva na ekodizajn u skladu s (EC) No 1275/2008 i (EU) No 801/2013. Kada je
uređajuumreženomnačinumirovanja,njegoviulazi/izlaziimrežnosučeljesutakođerunačinumirovanja
imoždanećeispravnoraditi.Zapokretanjeuređajapritisnitetipkuzauključivanje/isključivanjeWi-Fi
uređaja,uključivanje/isključivanjeLED-a,ponovnopostavljanjeiligumbzaWPS.
OvaopremasukladnajeEUograničenjimaoizloženostizračenjuunekontroliranomokruženju.Ovaj
uređajsemorapostavitiikoristitinaminimalnojudaljenostiod20cmizmeđuradijatoraivašegtijela.
Svinačinirada:
2.4GHz: 802.11b, 802.11g, 802.11n (HT20), 802.11n (HT40), 802.11ac (VHT20), 802.11ac (VHT40)
5GHz: 802.11a, 802.11n (HT20), 802.11n (HT40), 802.11ac (VHT20), 802.11ac (VHT40), 802.11ac (VHT80)
Unastavkusunavedenifrekvencija,načinradaimaksimalnaemitiranasnagauEU:
2412-2472MHz (802.11g 6Mbps): 19.81 dBm
5180-5240MHz (802.11ac VHT20 MCS0): 20.1 dBm
5260-5320MHz (802.11ac VHT40 MCS0): 21.31 dBm
5500-5700MHz (802.11ac VHT80 MCS0): 27.48 dBm
Uređajjeograničennauporabuuzatvorenimprostorimasamopriraduufrekvencijskomrasponuod5150
do 5350 MHz.
Adaptersemorainstaliratiblizuuređajaimorabitilakodostupan.
AT BE BG CZ DK EE FR
DE IS IE IT EL ES CY
LV LI LT LU HU MT NL
NO PL PT RO SI SK TR
FI SE CH UK HR
158
Czech
Safety Notices
• Počítačpoužívejtejenpřiteplotěokolí0˚C(32˚F)až40˚C(104˚F).
• Informacenaleznetenaenergetickémštítkunaspodnístraněvašehoproduktu.Ujistětese,ženapájecí
adaptérjevsouladushodnotounaněmuvedenou.
• NEPOKLÁDEJTEnanerovnéaninestabilnípracovnípovrchy.Pokudjeskříňpočítačepoškozená,
vyhledejte opravnu.
• NEDÁVEJTEanineupouštějtepředmětynahornístranuproduktuanidonějnezastrkujtežádnécizí
objekty.
• NEVYSTAVUJTEaninepoužívejteblízkotekutin,deštěnebovlhkosti.NEPOUŽÍVEJTEmodemběhem
bouřek.
• NEZAKRÝVEJTEotvorynaproduktu,kterémajízabránitpřehřátísystému.
• NEPOUŽÍVEJTEpoškozenénapájecíkabely,doplňkyanijinéperiférie.
• Pokudjenapájecízdrojporouchaný,nepokoušejtesejejopravovat.Kontaktujtekvalifikovaného
servisníhotechnikaneboprodejce.
• Abynedošlokzásahuelektrickýmproudem,odpojtenapájecíkabelzelektrickézásuvkypřed
přemístěnímpočítače.
• NEINSTALUJTEtotovybavenívýšeneždovýšky2metrů.
CE statement
Zjednodušené prohlášení o shodě s EU
SpolečnostASUSTekComputerInc.tímtoprohlašuje,žetotozařízenísplňujezákladnípožadavkyadalší
příslušnáustanovenísměrnice2014/53/EU.PlnézněníprohlášeníoshoděEUjekdispozicinaadrese
https://www.asus.com/Networking/ROG-Rapture-GT-AC2900/HelpDesk_Declaration/.
Prohlášení o shodě se směrnicí o ekodesignu 2009/125/ES
Byloprovedenotestovánípožadavkůnaekodesignpodlesměrnic(ES)č.1275/2008a(EU)č.801/2013.
Kdyžsetotozařízenínacházívpohotovostnímsíťovémrežimu,jehovstupy/výstupyasíťovérozhraní
jsouvrežimuspánkuanemusífungovatsprávně.ZařízenílzeprobuditvypínačemWi-Fi,vypínačemLED,
resetovacímtlačítkemnebotlačítkemWPS.
TotozařízenívyhovujelimitůmEUprovystavenívyzařovánístanovenýmproneřízenéprostředí.Toto
zařízenímusíbýtnainstalovánoaprovozovánovminimálnívzdálenosti20cmmezizářičemavašímtělem.
Všechnyprovoznírežimy:
2.4GHz: 802.11b, 802.11g, 802.11n (HT20), 802.11n (HT40), 802.11ac (VHT20), 802.11ac (VHT40)
5GHz: 802.11a, 802.11n (HT20), 802.11n (HT40), 802.11ac (VHT20), 802.11ac (VHT40), 802.11ac (VHT80)
Nížejeuvedenafrekvence,režimamaximálnívysílanývýkonvEU:
2412-2472MHz (802.11g 6Mbps): 19.81 dBm
5180-5240MHz (802.11ac VHT20 MCS0): 20.1 dBm
5260-5320MHz (802.11ac VHT40 MCS0): 21.31 dBm
5500-5700MHz (802.11ac VHT80 MCS0): 27.48 dBm
Připrovozuvefrekvenčnímrozsahu5150až5350MHzjepoužívánítohotozařízeníomezenopouzena
vnitřníprostory.
Používanýadaptérsemusínacházetvblízkostizařízeníamusíbýtsnadnopřístupný.
AT BE BG CZ DK EE FR
DE IS IE IT EL ES CY
LV LI LT LU HU MT NL
NO PL PT RO SI SK TR
FI SE CH UK HR
159
Estonian
Safety Notices
• Sedaseadetvõibkasutadaümbritsevakeskkonnatemperatuuril0°C(32°F)kuni40°C(104°F).
• Vaadakeseadmepõhjalasuvatsiltijaveenduge,etteietoiteadaptervastabtoitepingele.
• ÄRGEasetageebaühtlaselevõiebastabiilselepinnale.Kuiakuümbrisonkahjustadasaanud,
pöörduge teenindusse.
• ÄRGEpangevõilaskekukkudamingeidesemeidseadmepealejaärgetorgakemidagiseadmesisse.
• ÄRGEkasutageseadetvihmakäesegavedelikejaniiskuselähedal.ÄRGEkasutagemodemitäikese
ajal.
• ÄRGEkatkekinniseadmeõhutusavasid,etvältidaselleülekuumenemist.
• ÄRGEkasutagekahjustunudtoitejuhtmeid,lisa-egavälisseadmeid.
• Kuitoiteadapteronrikkis,siisärgepüüdkesedaiseparandada.Võtkeühendustkvalifitseeritud
hooldustehnikugavõijaemüüjaga.
• Elektrilöögiohuvältimiseksühendagetoitekaabelpistikupesastlahtienne,kuisüsteemiümber
paigutate.
• ÄRGEpaigaldagesedaseadetkõrgemalekui2meetrit.
CE statement
Lihtsustatud ELi vastavusdeklaratsioon
KäesolevagakinnitabASUSTekComputerInc.,etseeseadeonvastavusesdirektiivi2014/53/ELoluliste
nõuetejateisteasjakohastesätetega.ELivastavusdeklaratsioonitäieliktekstonsaadavalaadressilhttps://
www.asus.com/Networking/ROG-Rapture-GT-AC2900/HelpDesk_Declaration/.
Vastavuse kinnitus ökodisaini direktiivile 2009/125/EÜ
Ökodisainierinõuetelevastavusttestitikooskõlasmääruste(EÜ)nr1275/2008ja(EÜ)nr801/2013
nõuetega.Kuiseadeonvõrkuühendatudooterežiimis,onselleI/Ojavõrguliidesunerežiimisningseetõttu
onvõimalik,etseadeeitoiminõuetekohaselt.SeadmeäratamiseksvajutageWi-Fion/off-nuppu,LEDon/
off-nuppu,lähtestusnuppuvõiWPSnuppu.
KäesolevseadevastabkontrollimatakeskkonnalesätestatudELikiirgusnormidele.Antudseadme
paigaldamiseljakasutamiseltulebarvestada,etseepeabjäämaradiaatoristjateiekehastvähemalt20cm
kaugusele.
Kõiktöörežiimid:
2.4GHz: 802.11b, 802.11g, 802.11n (HT20), 802.11n (HT40), 802.11ac (VHT20), 802.11ac (VHT40)
5GHz: 802.11a, 802.11n (HT20), 802.11n (HT40), 802.11ac (VHT20), 802.11ac (VHT40), 802.11ac (VHT80)
Teavesageduse,režiimijamaksimaalseedastatavavõimsusekohtaELisonesitatudallpool:
2412-2472MHz (802.11g 6Mbps): 19.81 dBm
5180-5240MHz (802.11ac VHT20 MCS0): 20.1 dBm
5260-5320MHz (802.11ac VHT40 MCS0): 21.31 dBm
5500-5700MHz (802.11ac VHT80 MCS0): 27.48 dBm
Seadet tuleb kasutada ainult sisetingimustes sagedusvahemikus 5150 MHz kuni 5350 MHz.
Adaptertulebpaigaldadaseadmelähedusse,kusseeonhõlpsaltkättesaadav.
AT BE BG CZ DK EE FR
DE IS IE IT EL ES CY
LV LI LT LU HU MT NL
NO PL PT RO SI SK TR
FI SE CH UK HR
160
Hungarian
Safety Notices
• Aterméket0˚C(32˚F)és40˚C(104˚F)közöttihőmérsékletenhasználja.
• Tekintsemegatermékaljánlévőminősítésicímkét,ésellenőrizze,hogyahálózatiadaptermegfelela
minősítésnek.
• NEtegyeaszámítógépetlabilis,vagyegyenetlenfelületre.Asérültburkolatotjavíttassameg.
• NEhelyezzenésNEejtsentárgyakatakészüléktetejére,ésnedugjonidegentárgyakatabelsejébe.
• NEtegyekifolyadéknak,esőnekvagynedvességnek,vagyhasználjaazokközelében.NEhasználjaa
modemetvillámlásközben.
• NEfedjebeakészülékenlévőszellőzőnyílásokat,nehogytúlmelegedjenarendszer.
• NEhasználjonsérülttápkábelt,kiegészítőtvagymásperifériát.
• Haatápegységelromlik,nekíséreljemegsajátmagamegjavítani.Forduljonszakemberhezvagya
termékviszonteladójához.
• Azáramütéselkerüléseérdekébenhúzzakiaberendezéstápkábelétakonnektorból,mielőtt
áthelyeznéarendszert.
• NEszereljeeztafelszerelést2méternélmagasabbra.
CE statement
Egyszerűsített EU-megfelelőségi nyilatkozat
AzASUSTekComputerInc.ezennelkijelenti,hogyezakészülékmegfelela2014/53/EUirányelvalapvető
követelményeinekésegyébvonatkozórendelkezéseinek.AzEU-megfelelőséginyilatkozatteljesszövegét
akövetkezőweboldalontekinthetimeg:https://www.asus.com/Networking/ROG-Rapture-GT-AC2900/
HelpDesk_Declaration/.
Megfelelőségi nyilatkozat a környezettudatos tervezésről szóló 2009/125/EK irányelvhez
Akörnyezettudatostervezéskövetelményeitilletőenteszteléstvégeztünkaz(EK)1275/2008és(EU)
801/2013előírásaiszerint.Haakészülékhálózatikészenlétiüzemmódravanállítva,akkorazI/Oésa
hálózaticsatolóalvóüzemmódbakerül,éselképzelhető,hogynemműködikmegfelelően.Akészülék
felébresztéséheznyomjamegaWi-FivagyaLEDfőkapcsolóját,aresetgombotvagyaWPSgombot.
EzaberendezésmegfelelazEurópaiUniórádiófrekvenciássugárzásravonatkozó,ellenőrizetlen
környezethezmegállapítotthatárértékeinek.Akészüléktelepítésekoréshasználatasoránlegalább20cm
távolságotkellhagyniafűtőtestésatesteközött.
Mindenműködésiüzemmód:
2.4GHz: 802.11b, 802.11g, 802.11n (HT20), 802.11n (HT40), 802.11ac (VHT20), 802.11ac (VHT40)
5GHz: 802.11a, 802.11n (HT20), 802.11n (HT40), 802.11ac (VHT20), 802.11ac (VHT40), 802.11ac
(VHT80)
AzalábbiakbanmegtekinthetiazEurópaiUnióbanérvényesfrekvenciát,üzemmódotésmaximálisátviteli
teljesítményt:
2412-2472MHz (802.11g 6Mbps): 19.81 dBm
5180-5240MHz (802.11ac VHT20 MCS0): 20.1 dBm
5260-5320MHz (802.11ac VHT40 MCS0): 21.31 dBm
5500-5700MHz (802.11ac VHT80 MCS0): 27.48 dBm
Az5150és5350MHzközöttifrekvenciatartománybanakészülékbeltérihasználatravankorlátozva.
Azadaptertaberendezésközelébenkelltelepíteni,ésegyszerűenelérhetővékelltenni.
AT BE BG CZ DK EE FR
DE IS IE IT EL ES CY
LV LI LT LU HU MT NL
NO PL PT RO SI SK TR
FI SE CH UK HR
161
Latvian
Safety Notices
• Lietojietšoierīcitikaivietās,kurapkārtējātemperatūrairno0°C(32°F)līdz40°C(104°F).
• Skatietstrāvasparametruuzlīmiierīcesapakšāunpārliecinieties,laistrāvasadapterisatbilstu
parametriem.
• NENOVIETOTuznelīdzenasunnestabilasdarbavirsmas.Vērsietiestehniskāspalīdzībasdienestā,jair
bojātsārējaisietvars.
• NENOVIETOTvainemestpriekšmetusuzvirsmasunneievietotierīcēnekādussvešķermeņus.
• NEPAKĻAUTšķidrumu,lietusvaimitrumaietekmeivainelietottotuvumā.NELIETOTmodemunegaisa
laikā.
• NEAPKLĀTierīcesventilācijasatveres,laisistēmanepārkarstu.
• NELIETOTbojātusstrāvasvadus,papildierīcesvaicitasārējāsierīces.
• Jaadapterisirbojāts,neveiciettāremontupats.Sazinietiesarkvalificētuspeciālistuvaisavupārdevēju.
• Lainovērstuelektriskāsstrāvastriecienarisku,atvienojietstrāvaskabelinostrāvaskontaktligzdas
pirmssistēmaspārvietošanas.
• NEMONTĒJIETšoaprīkojumuaugstākpar2metriem.
CE statement
Vienkāršots ES paziņojums par atbilstību
AršoASUSTekComputerInc.paziņo,kašīierīceatbilstDirektīvasNr.2014/53/ESbūtiskāmprasībāmun
citiemattiecīgiemnoteikumiem.PilnsESatbilstībaspaziņojumatekstsirpieejamsšeit:https://www.asus.
com/Networking/ROG-Rapture-GT-AC2900/HelpDesk_Declaration/.
Atbilstības paziņojums ekodizaina Direktīvai Nr. 2009/125/EK
VeiktaekodizainaprasībupārbaudesaskaņāarKomisijasRegulu(EK)Nr.1275/2008unKomisijasRegulu
(ES)Nr.801/2013.Jaierīceirtīklagaidstāvesrežīmā,tāsI/O(ievade/izvade)untīklainterfeissirmiega
režīmāunvarnedarbotiespareizi.Laiaktivizētuierīci,nospiedietpoguWi-Fion/off(Wi-Fiieslēgts/izslēgts),
LEDon/off(LEDieslēgts/izslēgts),reset(atiestatīt)vaiWPS.
ŠīierīceatbilstESradiācijasiedarbībasierobežojumiem,kasnoteiktividei,kuršīiedarbībanetiek
kontrolēta.Šīierīceirjāuzstādaunjādarbina,ievērojotminimāloattālumu20cmstarpradiatoruun
ķermeni.
Visidarbībasrežīmi:
2.4GHz: 802.11b, 802.11g, 802.11n (HT20), 802.11n (HT40), 802.11ac (VHT20), 802.11ac (VHT40)
5GHz: 802.11a, 802.11n (HT20), 802.11n (HT40), 802.11ac (VHT20), 802.11ac (VHT40), 802.11ac (VHT80)
Frekvence,režīmsunmaksimālāpārraidītājaudaESirnorādītatālāk.
2412-2472MHz (802.11g 6Mbps): 19.81 dBm
5180-5240MHz (802.11ac VHT20 MCS0): 20.1 dBm
5260-5320MHz (802.11ac VHT40 MCS0): 21.31 dBm
5500-5700MHz (802.11ac VHT80 MCS0): 27.48 dBm
Šīierīce,darbojotiesno5150MHzlīdz5350MHzfrekvencesdiapazonā,paredzētatikailietošanai
iekštelpās.
Adapterimirjābūtnovietotamierīcestuvumāunvieglipieejamam.
AT BE BG CZ DK EE FR
DE IS IE IT EL ES CY
LV LI LT LU HU MT NL
NO PL PT RO SI SK TR
FI SE CH UK HR
162
Lituanian
Safety Notices
• Naudokitėsšiuogaminiutikesant0°C(32°F)–40°C(104°F)aplinkosorotemperatūrai.
• Žr.techniniųcharakteristikųetiketę,esančiągaminioapačioje,irįsitikinkite,armaitinimoadapteris
atitinka tas charakteristikas.
• NESTATYKITEantnelygiųarnestabiliųdarbiniųpaviršių.Kreipkitėspagalbos,jeipažeidėtekorpusą.
• NEDĖKITEantviršaus,neužmeskitearbanekiškiteįgaminįpašaliniųdaiktų.
• NENAUDOKITEdrėgnojevietoje,šaliaskysčių,kuryradrėgna,neleiskiteaplyti.NENAUDOKITE
modemo per elektros audras.
• NEUŽDENKITEgaminioventiliacijosangų,kadsistemaneperkaistų.
• NENAUDOKITEpažeistųmaitinimolaidų,priedųarkitųperiferiniųįrenginių.
• Jeiadapterissugestų,nebandykitejoremontuotipatys.Kreipkitėsįkvalifikuotąmeistrąarba
pardavėją.
• Norėdamiišvengtielektrossmūgiopavojaus,priešperkeldamisistemąįkitąvietą,atjunkitemaitinimo
kabelįnuoelektroslizdo.
• NEMONTUOKITEšioįrenginioaukščiaunei2metrųaukštyje.
CE statement
Supaprastinta ES atitikties deklaracija
Šiamedokumentebendrovė„ASUSTekComputerInc.“pareiškia,kadšisprietaisasatitinkapagrindinius
reikalavimusirkitassusijusiasDirektyvos2014/53/EBnuostatas.VisąESatitiktiesdeklaracijostekstąrasite
https://www.asus.com/Networking/ROG-Rapture-GT-AC2900/HelpDesk_Declaration/.
Ekologinio projektavimo direktyvos 2009/125/EB atitikties deklaracija
Atliktasekologinioprojektavimoreikalavimųpagal(EB)Nr.1275/2008ir(ES)Nr.801/2013atitikimo
patikrinimas.Kaiprietaisasyraprijungtasprietinkloirveikiabudėjimorežimu,joįjungimo/išjungimoir
tinklosąsajaveikiamiegorežimuirnegalitinkamaiveikti.Norėdamipažadintiprietaisą,paspauskite„Wi-
Fi“įjungimo/išjungimo,šviesosdiodoįjungimo/išjungimo,nustatymoišnaujoarbaWPSmygtuką.
ŠiįrangaatitinkaESradiacijospoveikioribas,nustatytasnekontroliuojamaiaplinkai.Šįprietaisąreikia
statytiirnaudotiten,kurjisbūtųbent20cmatstumunuojūsųkūno.
Visioperaciniairežimai:
2.4GHz: 802.11b, 802.11g, 802.11n (HT20), 802.11n (HT40), 802.11ac (VHT20), 802.11ac (VHT40)
5GHz: 802.11a, 802.11n (HT20), 802.11n (HT40), 802.11ac (VHT20), 802.11ac (VHT40), 802.11ac (VHT80)
Dažnis,režimasirmaksimalisignalųsiuntimogaliaESnurodytatoliau:
2412-2472MHz (802.11g 6Mbps): 19.81 dBm
5180-5240MHz (802.11ac VHT20 MCS0): 20.1 dBm
5260-5320MHz (802.11ac VHT40 MCS0): 21.31 dBm
5500-5700MHz (802.11ac VHT80 MCS0): 27.48 dBm
Šįįrenginįgalimanaudotitikpatalpoje,kaijisveikia5150–5350MHzdažniųdiapazone.
Adapterisprivalobūtiįrengtasšaliaįrenginioirjisturibūtilengvaipasiekiamas.
AT BE BG CZ DK EE FR
DE IS IE IT EL ES CY
LV LI LT LU HU MT NL
NO PL PT RO SI SK TR
FI SE CH UK HR
163
Polish
Safety Notices
• Tenproduktnależyużywaćwmiejscachotemperaturzeotoczeniawzakresie0˚C(32˚F)do40˚C
(104˚F).
• Należysprawdzićtabliczkęznamionowąnaspodzieproduktuiupewnićsię,żezasilaczjestzgodnyz
podanymi wartościami.
• NIENALEŻYumieszczaćurządzeniananierównychlubniestabilnychpowierzchniachroboczych.Po
uszkodzeniuobudowynależyprzekazaćkomputerdoserwisu.
• NIENALEŻYumieszczać,upuszczaćlubwpychaćżadnychobcychobiektównaprodukt.
• NEINALEŻYwystawiaćnadziałanielubużywaćkomputerawpobliżupłynów,nadeszczulubwilgoci.
NIENALEŻYużywaćmodemupodczasburzzwyładowaniamielektrycznymi.
• AbyzapobiecprzegrzaniusystemuNIENALEŻYzakrywaćszczelinproduktu.
• NIENALEŻYprzykrywaćszczelinwentylacyjnychkomputeradesktopPC,abyzapobiecprzegrzaniu
systemu.
• Jeśliuszkodzonyzosatałzasilacznienależypróbowaćnaprawiaćgosamemu.Należyskontaktowaćsię
zwykwalifikowanymtechnikiemserwisulubzesprzedawcą.
• Abyzapobiecporażeniuprądemelektrycznym,przedprzeniesieniemsystemunależyodłączyćkabel
zasilającyodgniazdkaelektrycznego.
• NIENALEŻYmontowaćtegourządzenianawysokościwiększejniż2metry.
CE statement
Uproszczona deklaracja zgodności UE
FirmaASUSTekComputerInc.niniejszymoświadcza,żeurządzenietojestzgodnezzasadniczymi
wymogamiiinnymiwłaściwymipostanowieniamidyrektywy2014/53/UE.Pełnytekstdeklaracjizgodności
UEjestdostępnypodadresemhttps://www.asus.com/Networking/ROG-Rapture-GT-AC2900/HelpDesk_
Declaration/.
Deklaracja zgodności dotycząca dyrektywy w sprawie ekoprojektu 2009/125/WE
Przeprowadzonotestypodkątemwymogówdotyczącychekoprojektuzgodniezrozporządzeniem
(WE)Nr1275/2008i(UE)Nr801/2013.Gdyurządzeniejestwsieciowymtrybieczuwania,jegoporty
We/Wyorazinterfejssieciowyrównieżznajdująsięwtrybieuśpieniaimogąniedziałaćprawidłowo.W
celuwznowieniapracyurządzenianależynacisnąćprzyciskwłączania/wyłączaniasieciWi-Fi,przycisk
włączania/wyłączaniawskaźnikaLED,przyciskresetowanialubWPS.
TourządzeniejestzgodnezlimitamiUEdotyczącymiekspozycjinapromieniowanieustanowionymidla
niekontrolowanegośrodowiska.Urządzenietopowinnobyćzainstalowaneiużywaneprzyzachowaniu
minimalnejodległości20cmmiędzyradiatorem,aciałem.
Wszystkietrybydziałania:
2.4GHz: 802.11b, 802.11g, 802.11n (HT20), 802.11n (HT40), 802.11ac (VHT20), 802.11ac (VHT40)
5GHz: 802.11a, 802.11n (HT20), 802.11n (HT40), 802.11ac (VHT20), 802.11ac (VHT40), 802.11ac
(VHT80)
Poniżejwskazanoczęstotliwość,trybimaksymalnąmocnadawaniawUE:
2412-2472MHz (802.11g 6Mbps): 19.81 dBm
5180-5240MHz (802.11ac VHT20 MCS0): 20.1 dBm
5260-5320MHz (802.11ac VHT40 MCS0): 21.31 dBm
5500-5700MHz (802.11ac VHT80 MCS0): 27.48 dBm
Działanietegourządzeniawzakresieczęstotliwościod5150do5350MHzjestograniczonewyłączniedo
użytkuwewnątrzpomieszczeń.
Tenadapternależyzainstalowaćwpobliżuurządzeniaipowinienonbyćłatwodostępny.
AT BE BG CZ DK EE FR
DE IS IE IT EL ES CY
LV LI LT LU HU MT NL
NO PL PT RO SI SK TR
FI SE CH UK HR
164
Romanian
Safety Notices
• UtilizaţiPC-uldesktopînmediicutemperaturaambiantăcuprinsăîntre0˚C(32˚F)şi40˚C
(104 ˚F).
• Consultaţietichetadepeparteadejosaprodusuluipentruavăasiguracăadaptoruldvs.este
conform.
• NUaşezaţiprodusulpesuprafeţedelucruneregulatesauinstabile.Încazulîncarecarcasas-a
deteriorat,solicitaţioperaţiideservice.
• NUplasaţișinuscăpaţiobiectepeparteadesusaprodusuluișinuintroduceţiobiecteexterneîn
produs.
• NUexpuneţiPC-uldesktoplalichide,laploaiesaulaumezeală.NUutilizaţiPC-uldesktopîntimpul
furtunilorcudescărcărielectrice.
• NUacoperiţiorificiiledeventilaredepeprodus.Încazcontrar,esteposibilcasistemulsăse
supraîncălzească.
• NUutilizaţicabluridealimentare,accesoriisauechipamenteperifericedeteriorate.
• Dacăsursadealimentaresedefectează,nuîncercaţisăoreparaţisingur.Contactaţiuntehniciande
service calificat sau distribuitorul local.
• Pentruaprevenipericoluldeelectrocutare,deconectaţicabluldealimentaredelaprizaelectrică
înaintedereamplasareasistemului.
• NUmontaţiacestechipamentlaoînălţimemaimarede2m.
CE statement
Declarație de conformitate UE simplificată
ASUSTekComputerInc.declarăcăacestdispozitivesteînconformitatecucerinţeleesenţialeșicualte
prevederirelevantealeDirectivei2014/53/UE.DeclaraţiadeconformitateUEcompletăestedisponibilăla
adresa: https://www.asus.com/Networking/ROG-Rapture-GT-AC2900/HelpDesk_Declaration/.
Declarația de conformitate pentru Directiva privind proiectarea ecologică 2009/125/CE
Testareapentrucerinţeledeproiectareecologicăînconformitatecu(CE)nr.1275/2008și(UE)nr.
801/2013afostefectuată.Cânddispozitivulseaflăînmoduldestandbyînreţea,I/Eșiinterfaţadereţease
aflăînmodulderepausșipotsănufuncţionezecorect.Pentruareactivadispozitivul,apăsaţibutonulde
pornire/oprire Wi-Fi, pornire/oprire LED, resetare sau butonul WPS.
AcestdispozitivseîncadreazăînlimiteledeexpunerelaradiaţiiUEstabilitepentruunmediunecontrolat.
Acestechipamenttrebuieinstalatșioperatcudistanţaminimăde20cmîntreradiatorșicorpuldvs.
Toatemoduriledefuncţionare:
2.4GHz: 802.11b, 802.11g, 802.11n (HT20), 802.11n (HT40), 802.11ac (VHT20), 802.11ac (VHT40)
5GHz: 802.11a, 802.11n (HT20), 802.11n (HT40), 802.11ac (VHT20), 802.11ac (VHT40), 802.11ac
(VHT80)
Frecvenţa,modulșiputereamaximătransmisăînUEsuntenumeratemaijos:
2412-2472MHz (802.11g 6Mbps): 19.81 dBm
5180-5240MHz (802.11ac VHT20 MCS0): 20.1 dBm
5260-5320MHz (802.11ac VHT40 MCS0): 21.31 dBm
5500-5700MHz (802.11ac VHT80 MCS0): 27.48 dBm
Dispozitivulesterestricţionatdoarlautilizareaîninteriorîncazuloperăriiînintervaluldefrecvenţă
cuprinsîntre5.150și5.350MHz.
Adaptorultrebuiemontatînapropiereaechipamentuluişitrebuiesăpoatăfiaccesatuşor.
AT BE BG CZ DK EE FR
DE IS IE IT EL ES CY
LV LI LT LU HU MT NL
NO PL PT RO SI SK TR
FI SE CH UK HR
165
Serbian
Safety Notices
• Koristiteovajproizvodusredinamasaambijentalnomtemperaturomizmeđu0°C(32°F)and40°C
(104°F).
• Pogledajteetiketusaoznakomnadnusvogproizvodaiproveritedasevašadapterzanapajanjeslaže
sa ovom oznakom.
• NEstavljajtenaneravnuilinestabilnuradnupovršinu.Potražiteservisiranjeukolikojekućište
oštećeno.
• NEpostavljajteineispuštajtepredmetenavrhuinegurajtestranepredmeteuproizvod.
• NEizlažitetečnostimainekoristiteublizinitečnosti,kišeilivlage.NEkoristitemodemtokomolujasa
grmljavinom.
• NEpokrivajteotvorenaproizvodudabistesprečilidasesistempregreje.
• NEkoristiteoštećenekablovezastruju,dodatkeilidrugeperiferneuređaje.
• Ukolikoseadapterpolomi,nepokušavajtedagasamipopravite.Pozovitekvalifikovanogtehničaraza
popravku ili svog prodavca.
• Dasprečiterizikodelektričnogšoka,isključitekablzastrujuizelektričneutičniceprepremeštanja
sistema.
• NEmontirajteopremunavisinivećojod2metra.
CE statement
Pojednostavljena EU deklaracija o saglasnosti
ASUSTekComputerInc.ovimpotvrđujedajeovajuređajusaglasnostisaključnimzahtevimaidrugim
relevantnim odredbama Direktive 2014/53/EU. Pun tekst EU deklaracije o saglasnosti je dostupan na adresi
https://www.asus.com/Networking/ROG-Rapture-GT-AC2900/HelpDesk_Declaration/.
Deklaracija o saglasnosti za Ekodizajn direktivu 2009/125/EC
Testiranje za eko-dizajn zahteve u skladu sa (EC) Br 1275/2008 i (EU) Br 801/2013 je obavljeno. Kada je ovaj
uređajurežimuzastanjepripravnostimreže,njegovI/Oimrežniinterfejssuurežimuzaspavanjeimožda
nećeraditiispravno.Daprobuditeuređaj,pritisniteWi-Fidauključite/isključite,uključite/isključiteLED,
resetujte ili WPS pritisnite taster.
OvaopremausaglasnostijesaEUograničenjimazaizloženostradijaciji,određenihzanekontrolisanu
sredinu. Ova oprema treba da bude instalirana i da se njome upravlja sa minimalne udaljenosti od 20 cm
izmeđuradijatoraivašegtela.
Sviradnirežimi:
2.4GHz: 802.11b, 802.11g, 802.11n (HT20), 802.11n (HT40), 802.11ac (VHT20), 802.11ac (VHT40)
5GHz: 802.11a, 802.11n (HT20), 802.11n (HT40), 802.11ac (VHT20), 802.11ac (VHT40), 802.11ac
(VHT80)
Frekvencija,režimimaksimalnasnagaprenošenjauEUsunavedeniispod:
2412-2472MHz (802.11g 6Mbps): 19.81 dBm
5180-5240MHz (802.11ac VHT20 MCS0): 20.1 dBm
5260-5320MHz (802.11ac VHT40 MCS0): 21.31 dBm
5500-5700MHz (802.11ac VHT80 MCS0): 27.48 dBm
Uređajjeograničenzakorišćenjeunutrasamokadaradiufrekventnomopseguod5150to5350MHz.
Adapter treba da bude instaliran blizu opreme i lako dostupan.
AT BE BG CZ DK EE FR
DE IS IE IT EL ES CY
LV LI LT LU HU MT NL
NO PL PT RO SI SK TR
FI SE CH UK HR
166
Slovanian
Safety Notices
• Izdelekuporabljajtevokoljihstemperaturomed0°Cin40°C.
• Preberiteoznakenanalepkinadnuvašegaizdelkainseprepričajte,dajenapajalnikskladenz
zahtevami, navedenimi na nalepki.
• NapraveNEpostavljajtenaneravnealinestabilnedelovnepovršine.Vprimerupoškodbeohišja
poiščitepomočservisa.
• NanapravoNESMETEpostavljatialinanjospuščatipredmetovoz.vanjopotiskatikakršnegakolitujka.
• NapraveNEizpostavljajteoz.uporabljajtevbližinitekočin,dežjaalivlage.ModemaNESMETE
uporabljati med nevihtami.
• PrezračevalnihrežnaizdelkuNESMETEpokritizato,dasesistemnepregreje.
• NEuporabljajtepoškodovanihnapajalnihkablov,dodatkovalidrugihzunanjihnaprav.
• Čejenapajalnikpoškodovan,ganeposkušajtepopravitisami.Stopitevstikzusposobljenim
serviserjem ali prodajalcem.
• Čeželitepreprečitinevarnostelektričnegasunka,predprestavljanjemsistemaodklopitenapajalni
kabelizelektričnevtičnice.
• TeopremeNEnameščajtevišjeod2metrov.
CE statement
Poenostavljena izjava o skladnosti EU
ASUSTek Computer Inc. izjavlja, da je ta naprava skladna s temeljnimi zahtevami in drugimi relevantnimi
določiliDirektive2014/53/EU.CelotnobesediloizjaveEUoskladnostijenavoljonaspletnemmestu
https://www.asus.com/Networking/ROG-Rapture-GT-AC2900/HelpDesk_Declaration/.
Izjava o skladnosti za Direktivo o okoljsko primerni zasnovi 2009/125/ES
Testiranjegledezahtevzaokoljskoprimernozasnovovskladuz(ES)št.1275/2008in(EU)št.801/2013je
biloizvedeno.Čejenapravavomrežnemnačinupripravljenosti,stavhodno-izhodniinomrežnivmesnikv
načinuspanjainmordanebostadelovalapravilno.Čeželitenapravoprebuditi,pritisnitegumbzavklop/
izklop Wi-Fi, vklop/izklop LED, ponastavitev ali WPS.
Oprema je v skladu z omejitvami EU o izpostavljenosti sevanju za nenadzorovano okolje. Opremo
namestiteinznjoupravljajtenanajmanjšioddaljenosti20cmmedradiatorjemintelesom.
Vsinačinidelovanja:
2.4GHz: 802.11b, 802.11g, 802.11n (HT20), 802.11n (HT40), 802.11ac (VHT20), 802.11ac (VHT40)
5GHz: 802.11a, 802.11n (HT20), 802.11n (HT40), 802.11ac (VHT20), 802.11ac (VHT40), 802.11ac (VHT80)
Frekvenca,načininmaksimalnaoddajnamočvEUsonavedenevnadaljevanju:
2412-2472MHz (802.11g 6Mbps): 19.81 dBm
5180-5240MHz (802.11ac VHT20 MCS0): 20.1 dBm
5260-5320MHz (802.11ac VHT40 MCS0): 21.31 dBm
5500-5700MHz (802.11ac VHT80 MCS0): 27.48 dBm
Napravasevnotranjihprostorihlahkouporabljasamo,čedelujevfrekvenčnemobmočjuod5150MHzdo
5350 MHz.
Napajalnik morate namestiti blizu opreme, kjer je preprosto dostopen.
AT BE BG CZ DK EE FR
DE IS IE IT EL ES CY
LV LI LT LU HU MT NL
NO PL PT RO SI SK TR
FI SE CH UK HR
167
Slovakian
Safety Notices
• Tentovýrobokpoužívajtevprostrediachsokolitouteplotouod0˚C(32˚F)do40˚C(104˚F).
• Pozritesitypovýštítoknaspodnejstranezariadeniaauistitesa,ženapájacíadaptérvyhovujetomuto
menovitémuvýkonu.
• NEUMIESTŇUJTEnanerovnéanestabilnépracovnépovrchy.Vprípadepoškodeniaskrinkyvyhľadajte
pomocservisnéhostrediska.
• NahornústranuzariadeniaNEUMIESTŇUJTEaniNENECHÁVAJTEžiadnepredmetyanevkladajtedoň
žiadnecudziepredmety.
• NEVYSTAVUJTEaninepoužívajtevblízkostikvapalín,vdaždialebovlhkomprostredí.NEPOUŽÍVAJTE
modempočasbúrkysvýskytombleskov.
• VetracieotvorynazariadeníNEZAKRÝVAJTE,abysaneprehrievalo.
• NEPOUŽÍVAJTEkáble,príslušenstvoaleboperiférnezariadenia,ktorésúpoškodené.
• Keďjezdrojnapájaniapoškodený,nepokúšajtesahosamiopravovať.Obráťtesanakompetentného
servisnéhotechnikaalebosvojhopredajca.
• Predpremiestňovanímzariadeniaodpojtesieťovýkábelzelektrickejzásuvky,abysazabrániloriziku
úrazuelektrickýmprúdom.
• TotozariadenieNEUPEVŇUJTEdovýškyviacako2metre.
CE statement
Zjednodušené vyhlásenie o zhode ES
SpoločnosťASUSTekComputerInc.týmtovyhlasuje,žetotozariadeniejevzhodeshlavnými
požiadavkamiaostatnýmipríslušnýmiustanoveniamismernice2014/53/EÚ.Celýtextvyhláseniao
zhodeESnájdetenaadresehttps://www.asus.com/Networking/ROG-Rapture-GT-AC2900/HelpDesk_
Declaration/.
Vyhlásenie o zhode podľa smernice o ekodizajne č. 2009/125/ES
Bolovykonanétestovanienasplneniepožiadavieknaekodizajnpodľasmernice(ES)č.1275/2008a(EÚ)
č.801/2013.Akjezariadenievpohotovostnomrežimevrámcisiete,jehovstupné/výstupnéasieťové
rozhraniesúvrežimespánkuanemusiasprávnefungovať.Akchcetezariadeniezobudiť,stlačtetlačidlo
Zapnúť/VypnúťWi-Fi/Zapnúť/VypnúťLED/ResetovaniealeboWPS.
Totozariadenievyhovujeeurópskym(EÚ)limitnýmhodnotámprevystaveniežiareniustanoveným
prenekontrolovanéprostredie.Totozariadeniesamáinštalovaťaprevádzkovaťminimálnev20cm
vzdialenostimedzižiaričomatelom.
Všetkyprevádzkovérežimy:
2.4GHz: 802.11b, 802.11g, 802.11n (HT20), 802.11n (HT40), 802.11ac (VHT20), 802.11ac (VHT40)
5GHz: 802.11a, 802.11n (HT20), 802.11n (HT40), 802.11ac (VHT20), 802.11ac (VHT40), 802.11ac
(VHT80)
Frekvencia,režimamaximálnyprenosovývýkonvEÚsúuvedenénižšie:
2412-2472MHz (802.11g 6Mbps): 19.81 dBm
5180-5240MHz (802.11ac VHT20 MCS0): 20.1 dBm
5260-5320MHz (802.11ac VHT40 MCS0): 21.31 dBm
5500-5700MHz (802.11ac VHT80 MCS0): 27.48 dBm
Používanietohtozariadeniajeobmedzenénapoužívanielenvrámcifrekvenčnéhorozsahu5150až5350
MHz.
Vedľazariadeniamusíbyťnainštalovanýadaptér,ktorýmusíbyťľahkoprístupný.
AT BE BG CZ DK EE FR
DE IS IE IT EL ES CY
LV LI LT LU HU MT NL
NO PL PT RO SI SK TR
FI SE CH UK HR
168
Turkish
Safety Notices
• Buürünüortamsıcaklığı0˚C(32˚F)ve35˚C(95˚F)arasındakisıcaklıklardakullanın.
• Ürününüzünaltındakiderecelendirmeetiketinebaşvurunvegüçadaptörünüzünbununlauyumlu
olduğundan emin olun.
• DüzgünveyasabitolmayançalışmayüzeylerineYERLEŞTİRMEYİN.Kasahasargörmüşseservise
başvurun.
• Ürününüzerinenesnelerkoymayınveyadüşürmeyinveiçineyabancınesneleritmeyin.
• Sıvılara,yağmurayadanememaruzBIRAKMAYINveyabunlarınyanındaKULLANMAYIN.Şimşekli
fırtınalarda modemi KULLANMAYIN.
• Sisteminaşırıısınmasınıönlemekiçinüründekihavalandırmadeliklerininüzerinikapatmayın.
• SisteminaşırıısınmasınıönlemekiçinmasaüstüPC’ninüzerindekihavadelikleriniKAPATMAYIN.
• Güçkaynağıbozulmuşsa,tekbaşınızaonarmayaçalışmayın.Yetkiliservisteknisyeniyleveyasatıcınızla
bağlantı kurun.
• Elektrikçarpmasıriskiniönlemekiçin,sisteminyerinideğiştirmedenöncegüçkablosununelektrikprizi
ile olan bağlantısını kesin.
• Buekipmanı2metredenyüksekbirnoktayamonteETMEYİN.
CE statement
Basitleştirilmiş AB Uygunluk Bildirimi
ASUSTek Computer Inc., bu aygıtın temel gereksinimlerle ve 2014/53/EU Yönergesinin diğer ilgili
koşullarıyla uyumlu olduğunu bildirir. AB uygunluk bildiriminin tam metni https://www.asus.com/
Networking/ROG-Rapture-GT-AC2900/HelpDesk_Declaration/ adresinde bulunabilir.
2009/125/EC Çevreye Duyarlı Tasarım yönergesi için Uygunluk Bildirimi
(EC) No 1275/2008 ve (EU) No 801/2013 uyarınca çevreye duyarlı tasarım gereksinimlerine yönelik test
işlemi gerçekleştirilmiştir. Aygıt Ağa Bağlı Bekleme Modundayken, G/Ç ve ağ arabirimi uyku modundadır
ve uygun biçimde çalışmayabilir. Aygıtı uyku durumundan çıkarmak için Wi-Fi açık/kapalı, LED açık/kapalı,
sıfırla veya WPS düğmesine basın.
Bu donanım, kontrolsüz bir ortam için belirlenen AB radyasyona maruz kalma sınırlarıyla uyumludur.
Bu donanım, sinyal vericisi ve vücudunuz arasında en az 20 cm mesafe olacak şekilde yerleştirilmeli ve
çalıştırılmalıdır.
Tüm işletim modları:
2.4GHz: 802.11b, 802.11g, 802.11n (HT20), 802.11n (HT40), 802.11ac (VHT20), 802.11ac (VHT40)
5GHz: 802.11a, 802.11n (HT20), 802.11n (HT40), 802.11ac (VHT20), 802.11ac (VHT40), 802.11ac (VHT80)
AB içinde frekans, mod ve iletilen en fazla güç aşağıda listelenmektedir:
2412-2472MHz (802.11g 6Mbps): 19.81 dBm
5180-5240MHz (802.11ac VHT20 MCS0): 20.1 dBm
5260-5320MHz (802.11ac VHT40 MCS0): 21.31 dBm
5500-5700MHz (802.11ac VHT80 MCS0): 27.48 dBm
5150 - 5350 MHz frekans aralığında çalıştırılırken aygıtın kullanımı yalnızca iç mekânla sınırlıdır.
Adaptör, donanımın yakınına kurulmalı ve kolayca erişilebilir olmalıdır.
AT BE BG CZ DK EE FR
DE IS IE IT EL ES CY
LV LI LT LU HU MT NL
NO PL PT RO SI SK TR
FI SE CH UK HR
169
Danish
Safety Notices
• Anvendproduktetiomgivelsermedtemperaturerpåmellem0°C(32°F)og40°C(104°F).
• Sørgfor,atdinstrømadapterpassertilstrømoplysninger,derfindespåbundenafditprodukt.
• AnbringIKKEpåujævneellerustabilearbejdsoverflader.Sendtilreparation,hviskabinetteterblevet
beskadiget.
• DermåIKKEplaceresellertabesgenstandepåproduktet.OgdermåIKKEstikkesfremmedlegemerind
i produktet.
• UdsætogbrugdenIKKEinærhedenafvæsker,regnellerfugt.BrugIKKEmodemmetunderuvejr.
• TildækIKKEventilationshullernepåproduktet,dasystemellerskanoverophede.
• BrugIKKEbeskadigedeel-ledninger,perifereenhederogbeskadigettilbehør.
• Hvisstrømforsyningengåristykker,måduikkeprøvepåselvatreparereden.Kontaktenautoriseret
servicetekniker eller forhandleren.
• Foratundgåfarenforelektriskstød,skaldufjernenetledningenfrastikkontakten,indenduflytter
systemet til et andet sted.
• UdstyretmåIKKEmontereshøjereopend2meter.
CE statement
Forenklet EU-overensstemmelseserklæringen
ASUSTekComputerInc.erklærerherved,atdenneenhederioverensstemmelsemedhovedkraveneog
øvrigerelevantebestemmelseridirektiv2014/53/EU.HeleEU-overensstemmelseserklæringenkanfindes
påhttps://www.asus.com/Networking/ROG-Rapture-GT-AC2900/HelpDesk_Declaration/.
Overensstemmelseserklæring for miljøvenligt design i direktiv 2009/125/EC
Vedrørendetestkravaføko-designihenholdtil(EC)nr.1275/2008og(EU)nr.801/2013erblevet
gennemført.Nårenhedenerpånetværk-standby,erdensI/Oognetværksgrænsefladeidvale,ogvil
muligvisikkevirkeordentligt.Forataktivereenheden,skaldutrykkepåtrådløstil/fra,LEDtil/fra,nulstil
eller WPS-knappen.
DetteudstyrerioverensstemmelsemedEU'sgrænser,derergældendeietukontrolleretmiljø.Dette
udstyr skal installeres og bruges mindst 20 cm mellem radiatoren og din krop.
Alle driftsfunktioner:
2.4GHz: 802.11b, 802.11g, 802.11n (HT20), 802.11n (HT40), 802.11ac (VHT20), 802.11ac (VHT40)
5GHz: 802.11a, 802.11n (HT20), 802.11n (HT40), 802.11ac (VHT20), 802.11ac (VHT40), 802.11ac (VHT80)
Frekvensen,indstillingenogdenmaksimaleoverførteeffektiEUeranførtpålistennedenfor:
2412-2472MHz (802.11g 6Mbps): 19.81 dBm
5180-5240MHz (802.11ac VHT20 MCS0): 20.1 dBm
5260-5320MHz (802.11ac VHT40 MCS0): 21.31 dBm
5500-5700MHz (802.11ac VHT80 MCS0): 27.48 dBm
Denneenhederbegrænsettilindendørsbrug,hvisdenbrugespåfrekvensområdet5150-5350MHz.
Adapterenskalbrugesinærhedenafudstyret,ogskalværelettilgængelig.
AT BE BG CZ DK EE FR
DE IS IE IT EL ES CY
LV LI LT LU HU MT NL
NO PL PT RO SI SK TR
FI SE CH UK HR
170
Dutch
Safety Notices
• Gebruikditproductinomgevingenmetomgevingstemperaturentussen0˚C(32°F)en40˚C(104˚F).
• Raadpleeghettypeplaatjeopdeonderkantvanuwproductencontroleerofuwvoedingsadapter
voldoet aan dit type.
• NIEToponegaleofinstabielewerkoppervlakkenplaatsen.Alsdebehuizingbeschadigdisgeraakt,
dient u hulp bij onderhoud hulp te zoeken.
• PlaatsoflaatGEENobjectenvallenbovenophetproductenschuifgeenvreemdeobjecteninhet
product.
• NIETindebuurtvanvloeistoffen,regenofvochtblootstellenofgebruiken.NIETdemodemtijdens
onweer gebruiken.
• DekdeuitlaatopeningenvanhetproductNIETAFzodathetsysteemnietoververhitraakt.
• NIETdeventilatieopeningenvandeDesktopPCafdekken,omoververhittingvanhetsysteemte
voorkomen.
• Alsdenetvoedingisbeschadigd,magunietproberenhetzelfterepareren.Neemcontactopmeteen
bevoegde servicemonteur of uw handelaar.
• Verwijder,voordatuhetsysteemverplaatst,destroomkabeluitdecontactdoosomelektrischeschok
te vermijden.
• MonteerditapparaatNIEThogerdan2meter.
CE statement
Vereenvoudigde EU-conformiteitsverklaring
ASUSTek Computer Inc. verklaart dat dit apparaat in overeenstemming is met de essentiële vereisten
en andere relevante bepalingen van Richtlijn 2014/53/EU. Volledige tekst EU-conformiteitsverklaring is
beschikbaar op https://www.asus.com/Networking/ROG-Rapture-GT-AC2900/HelpDesk_Declaration/.
Conformiteitsverklaring voor Ecodesign Richtlijn 2009/125/EG
Testen van vereisten van ecodesign overeenkomstig (EG) nr. 1275/2008 en (EU) nr. 801/2013
zijn uitgevoerd. Wanneer het apparaat in de modus Stand-by in netwerk staat, staan de I/O en
netwerkinterface in de slaapstand en werken wellicht niet goed. Om het apparaat uit de slaapstand te
halen, drukt u op de knop Wi-Fi aan/uit, LED aan/uit, reset of WPS.
Deze apparatuur voldoet aan EU-limieten voor blootstelling aan straling als uiteengezet voor
een onbeheerste omgeving. Deze apparatuur moet worden geïnstalleerd en bediend met een
minimumafstand van 20 cm tussen de radiator en uw lichaam.
Alle bedrijfsmodi:
2.4GHz: 802.11b, 802.11g, 802.11n (HT20), 802.11n (HT40), 802.11ac (VHT20), 802.11ac (VHT40)
5GHz: 802.11a, 802.11n (HT20), 802.11n (HT40), 802.11ac (VHT20), 802.11ac (VHT40), 802.11ac
(VHT80)
De frequentie, modus en het afgegeven maximumvermogen in de EU wordt hieronder vermeld:
2412-2472MHz (802.11g 6Mbps): 19.81 dBm
5180-5240MHz (802.11ac VHT20 MCS0): 20.1 dBm
5260-5320MHz (802.11ac VHT40 MCS0): 21.31 dBm
5500-5700MHz (802.11ac VHT80 MCS0): 27.48 dBm
Het apparaat is beperkt tot alleen binnengebruik bij werking in het frequentiebereik van 5150 tot 5350
MHz.
De adapter moet zich in de buurt van het apparaat bevinden en moet gemakkelijk toegankelijk zijn.
AT BE BG CZ DK EE FR
DE IS IE IT EL ES CY
LV LI LT LU HU MT NL
NO PL PT RO SI SK TR
FI SE CH UK HR
171
French
Safety Notices
• Utilisezceproduitdansunenvironnementdontlatempératureambianteestcompriseentre0˚C
(32°F) et 40˚C (104°F).
• Référez-vousàl'étiquettesituéeaudessousduproduitpourvérifierquel'adaptateursecteur
répondauxexigencesdetension.
• NEPASplacersurunesurfaceirrégulièreouinstable.Contactezleserviceaprès-ventesilechâssis
aétéendommagé.
• NEPASplacer,fairetomberouinsérerd'objetssur/dansleproduit.
• NEPASexposerl'appareilàlapluieouàl'humidité,tenez-leàdistancedesliquides.NEPAS
utiliser le modem lors d'un orage.
• NEPASbloquerlesouverturesdestinéesàlaventilationdusystèmepouréviterquecelui-cine
surchauffe.
• NEPASutiliserdecordonsd'alimentation,d'accessoiresouautrespériphériquesendommagés.
• Sil'adaptateurestendommagé,n'essayezpasdeleréparervous-même.Contactezuntechnicien
électriquequalifiéouvotrerevendeur.
• Pourévitertoutrisquedechocélectrique,débranchezlecâbled'alimentationdelaprise
électriqueavantdetoucherausystème.
• Neplacezpascetappareilàunehauteursupérieureà2mètres.
CE statement
Déclaration simplifiée de conformité de l’UE
ASUSTekComputerInc.déclareparlaprésentequecetappareilestconformeauxcritères
essentielsetautresclausespertinentesdeladirective2014/53/UE.Ladéclarationde
conformitédel'UEpeutêtretéléchargéeàpartirdusiteinternetsuivant:https://www.asus.
com/Networking/ROG-Rapture-GT-AC2900/HelpDesk_Declaration/.
Déclaration de conformité (Directive sur l'écoconception 2009/125/CE)
Testdelaconformitéauxexigencesd'écoconceptionselon[CE1275/2008]et[UE801/2013].Lorsque
l'appareilestenmodeNetworkedStandby,sonpanneaud'E/Setsoninterfaceréseausontenmode
veille et peuvent ne pas fonctionner correctement. Pour sortir l'appareil du mode veille, appuyez sur
leboutonWi-Fi,LED,deréinitialisationouWPS.
Cetappareilaététestéets'estavéréconformeauxlimitesétabliesparl'UEentermed'expositionaux
radiationsdansunenvironnementnoncontrôlé.Cetéquipementdoitêtreinstalléetutiliséavecun
minimum de 20 cm de distance entre la source de rayonnement et votre corps.
Tous les modes de fonctionnement:
2.4GHz: 802.11b, 802.11g, 802.11n (HT20), 802.11n (HT40), 802.11ac (VHT20), 802.11ac (VHT40)
5GHz: 802.11a, 802.11n (HT20), 802.11n (HT40), 802.11ac (VHT20), 802.11ac (VHT40),
802.11ac (VHT80)
Lafréquence,lemodeetlapuissancemaximaletransmisedel'UEsontlistésci-dessous:
2412-2472MHz (802.11g 6Mbps): 19.81 dBm
5180-5240MHz (802.11ac VHT20 MCS0): 20.1 dBm
5260-5320MHz (802.11ac VHT40 MCS0): 21.31 dBm
5500-5700MHz (802.11ac VHT80 MCS0): 27.48 dBm
Cetappareilestrestreintàuneutilisationenintérieurlorsd'unfonctionnementdanslaplagede
fréquencede5150à5350MHz.
L'adaptateurdoitêtreinstalléàproximitédel'équipementetêtreaisémentaccessible.
AT BE BG CZ DK EE FR
DE IS IE IT EL ES CY
LV LI LT LU HU MT NL
NO PL PT RO SI SK TR
FI SE CH UK HR
172
Finnish
Safety Notices
• Käytätätätuotettaympäristöissä,joissaympäristölämpötilaonvälillä0˚C(32˚F)ja40˚C(104˚F).
• Varmistatuotteenpohjassasijaitsevastaarvokilvestävastaakoverkkolaitetätänimellisarvoa.
• ÄLÄasetaepätasaisilletaiepävakaillepinnoille.Otayhteyshuoltoon,joskoteloonvahingoittunut.
• ÄLÄasetataipudotaesineitälaitteenpäälleäläkäannaminkäänvieraidenesineidenjoutuatuotteen
sisään.
• ÄLÄaltistanesteille,sateelletaikosteudelletaikäytäniidenlähellä.ÄLÄkäytämodeemia
ukkosmyrskyn aikana.
• ÄLÄpeitätuotteentuuletusaukkojaestääksesituotteenylikuumenemisen.
• ÄLÄkäytävahingoittuneitavirtajohtoja,lisävarusteitataimuitaoheislaitteita.
• Josvirtalähdeonrikkoutunut,äläitseyritäsitäkorjata.Otayhteysammattimaiseenhuoltohenkilöön
taijälleenmyyjääsi.
• Estääksesisähköiskunvaaranirrotavirtakaapelipistorasiastaennenjärjestelmänpaikanmuuttamista.
• ÄLÄkiinnitätätälaitetta2metriäkorkammalle.
CE statement
Yksinkertaistettu EU-vaatimustenmukaisuusvakuutus
ASUSTekComputerInc.vakuuttaatäten,ettätämälaiteon2014/53/EU-direktiivinolennaisten
vaatimustenjamuidenasiaankuuluvienlisäystenmukainen.KokoEU-vaatimustenmukaisuusvakuutuksen
tekstionnähtävissäosoitteessahttps://www.asus.com/Networking/ROG-Rapture-GT-AC2900/HelpDesk_
Declaration/.
Ekologisen suunnittelun direktiivin 2009/125/EY-vaatimustenmukaisuusvakuutus
Testaus (EY) N:o 1275/2008:n ja (EU) N:o 801/2013:n mukaisista ekologisista suunnitteluvaatimuksista on
suoritettu.Kunlaiteonverkossavalmiustilassa,senI/O-javerkkoliittymäovatlepotilassaeivätkäneehkä
toimioikein.Herättääksesilaitteen,painaWi-Fipäälle/pois-,LEDpäälle/pois-,nollaa-taiWPS-painiketta.
TämälaitetäyttääEU-säteilyrajoitukset,jotkaonasetettuhallitsemattomaanympäristöön.Tämälaitteisto
tuleeasentaajasitätuleekäyttääsiten,ettäsäteilijänjakehosivälinenetäisyysonvähintään20cm.
Kaikkikäyttötilat:
2.4GHz: 802.11b, 802.11g, 802.11n (HT20), 802.11n (HT40), 802.11ac (VHT20), 802.11ac (VHT40)
5GHz: 802.11a, 802.11n (HT20), 802.11n (HT40), 802.11ac (VHT20), 802.11ac (VHT40), 802.11ac (VHT80)
Taajuus,tilamaksimilähetettytehoEU:ssaonlistattualla:
2412-2472MHz (802.11g 6Mbps): 19.81 dBm
5180-5240MHz (802.11ac VHT20 MCS0): 20.1 dBm
5260-5320MHz (802.11ac VHT40 MCS0): 21.31 dBm
5500-5700MHz (802.11ac VHT80 MCS0): 27.48 dBm
Tämänlaitteenkäyttöonrajoitettusisätiloihin5150-5350MHz:in-taajuusalueella.
Verkkolaitetuleeliittäälähellelaitettahelpostitavoitettavissaolevaanpaikkaan.
AT BE BG CZ DK EE FR
DE IS IE IT EL ES CY
LV LI LT LU HU MT NL
NO PL PT RO SI SK TR
FI SE CH UK HR
173
German
Safety Notices
• BenutzenSiedasGerätnurinUmgebungen,dieeineTemperaturvon0˚C(32°F)bis40˚C(104°F)
aufweisen.
• PrüfenSieamAufkleberanderGeräteunterseite,obIhrNetzteildenStromversorgungsanforderungen
entspricht.
• StellenSiedasGerätNICHTaufschrägeoderinstabileArbeitsflächen.WendenSiesichandas
Wartungspersonal,wenndasGehäusebeschädigtwurde.
• LegenSieKEINEGegenständeaufdasGerät,lassenSiekeineGegenständedarauffallenundschieben
SiekeineFremdkörperindasGerät.
• SetzenSiedasGerätKEINESFALLSFlüssigkeiten,RegenoderFeuchtigkeitaus,verwendenSie
esnichtinderNähederartigerGefahrenquellen.VerwendenSiedasModemnichtwährend
eines Gewitters.
• DeckenSiedieLüftungsöffnungenamGerätNICHTab,umeineÜberhitzungdesSystemszu
vermeiden.
• BenutzenSieKEINEbeschädigtenNetzkabel,ZubehörteileodersonstigenPeripheriegeräte.
• FallsdasNetzteildefektist,versuchenSienicht,esselbstzureparieren.WendenSiesichanden
qualifizierten Kundendienst oder Ihre Verkaufsstelle.
• UmdieGefahreinesStromschlagszuverhindern,ziehenSiedasNetzkabelausderSteckdose,bevor
Sie das System an einem anderen Ort aufstellen.
• MontierenSiediesesGerätNICHTineinerHöheüberzweiMetern.
CE statement
Vereinfachte EU-Konformitätserklärung
ASUSTeKComputerInc.erklärthiermit,dassdiesesGerätmitdengrundlegendenAnforderungen
und anderen relevanten Bestimmungen der Richtlinie 2014/53/EU übereinstimmt. Der gesamte
TextderEU-Konformitätserklärungistverfügbarunter:https://www.asus.com/Networking/ROG-
Rapture-GT-AC2900/HelpDesk_Declaration/.
Konformitätserklärung für Ökodesign-Richtlinie 2009/125/EC
Die Überprüfung der Ökodesign-Anforderungen nach (EC) Nr. 1275/2008 und (EU) Nr. 801/2013 wurde
durchgeführt.WennsichdasGerätimNetzwerkbereitschaftsmodusbefindet,werdendieE/A-und
NetzwerkschnittstellenindenRuhezustandversetztundarbeitennichtwiegewöhnlich.UmdasGerät
aufzuwecken, drücken Sie die WLAN Ein/Aus-, LED Ein/Aus-, Reset- oder WPS-Taste.
DiesesGeräterfülltdieEU-Strahlenbelastungsgrenzwerte,diefüreinunbeaufsichtigtesUmfeldfestgelegt
wurden.DiesesGerätsolltemiteinemMindestabstandvon20cmzwischenderStrahlungsquelleund
Ihrem Körper installiert und betrieben werden.
Alle Betriebsarten:
2.4GHz: 802.11b, 802.11g, 802.11n (HT20), 802.11n (HT40), 802.11ac (VHT20), 802.11ac (VHT40)
5GHz: 802.11a, 802.11n (HT20), 802.11n (HT40), 802.11ac (VHT20), 802.11ac (VHT40), 802.11ac
(VHT80)
Die Frequenz, der Modus und die maximale Sendeleistung in der EU sind nachfolgend aufgeführt:
2412-2472MHz (802.11g 6Mbps): 19.81 dBm
5180-5240MHz (802.11ac VHT20 MCS0): 20.1 dBm
5260-5320MHz (802.11ac VHT40 MCS0): 21.31 dBm
5500-5700MHz (802.11ac VHT80 MCS0): 27.48 dBm
DasGerätistaufdenInnenbereichbeschränkt,wennesimFrequenzbereichvon5150MHzbis5350MHz
betrieben wird.
DasNetzteilmusssichinderNähedesGerätsbefindenundleichtzugänglichsein.
AT BE BG CZ DK EE FR
DE IS IE IT EL ES CY
LV LI LT LU HU MT NL
NO PL PT RO SI SK TR
FI SE CH UK HR
174
Greek
Safety Notices
• Ναχρησιμοποιείτετοπροϊόνσεχώρουςμεθερμοκρασίεςπεριβάλλοντοςαπό0˚Cέως40˚C.
• Ανατρέξτεστηνετικέταχαρακτηριστικώνστοκάτωμέροςτουπροϊόντοςσαςκαιβεβαιωθείτεότιο
προσαρμογέαςτροφοδοσίαςσαςσυμμορφώνεταιμετηναναγραφόμενητιμή.
• ΜΗΝτοποθετείτετησυσκευήσεανώμαληήασταθήεπιφάνειαεργασίας.Πηγαίνετετησυσκευήγια
σέρβιςαντοπερίβλημαέχειπάθειβλάβη.
• ΜΗΝτοποθετείτεαντικείμεναεπάνωκαιμηνσπρώχνετεαντικείμεναμέσαστοπροϊόν.
• ΜΗΝτηνεκθέτετεήτηχρησιμοποιείτεκοντάσευγρά,βροχή,ήυγρασία.ΜΗΝχρησιμοποιείτετο
μόντεμκατάτηδιάρκειαηλεκτρικήςκαταιγίδας.
• ΜΗΝκαλύπτετεταανοίγματαεξαερισμούστοπροϊόνγιανααποφύγετετυχόνυπερθέρμανσητου
συστήματος.
• ΜΗΝκαλύπτετεταανοίγματαεξαερισμούστοDesktopPCγιανααποφύγετετυχόνυπερθέρμανσητου
συστήματος.
• Αντοκαλώδιοπαροχήςρεύματοςπάθειβλάβη,μηνπροσπαθήσετενατοεπιδιορθώσετεμόνοισας.
Επικοινωνήστεμεκατάλληλαεκπαιδευμένοτεχνικόεπισκευώνήμετονμεταπωλητήσας.
• Γιανααποφύγετετονκίνδυνοηλεκτροπληξίας,αποσυνδέστετοκαλώδιοπαροχήςρεύματοςαπότην
πρίζαπριναλλάξετεθέσηστοσύστημα.
• ΜΗΝαναρτάτεαυτόντονεξοπλισμόσεύψοςμεγαλύτεροτων2μέτρων.
CE statement
Απλουστευμένη δήλωση συμμόρφωσης της ΕΕ
Μετοπαρόν,ηASUSTekComputerInc.δηλώνειπωςαυτήησυσκευήσυμμορφώνεταιμετιςθεμελιώδεις
απαιτήσειςκαιάλλεςσχετικέςδιατάξειςτηςΟδηγίας2014/53/ΕΕ.Τοπλήρεςκείμενοτηςδήλωσης
συμμόρφωσηςτηςΕΕείναιδιαθέσιμοστηδιεύθυνσηhttps://www.asus.com/Networking/ROG-Rapture-
GT-AC2900/HelpDesk_Declaration/.
Δήλωση συμμόρφωσης για την οδηγία Ecodesign (Οικολογικός σχεδιασμός) 2009/125/ΕΚ
Έχειδιενεργηθείδοκιμήγιατιςαπαιτήσειςοικολογικούσχεδιασμούσύμφωναμετους
κανονισμούς(ΕΚ)αριθ.1275/2008και(ΕΕ)αριθ.801/2013.Ότανησυσκευήβρίσκεταισε
λειτουργίαΑναμονήδικτύου,ηδιασύνδεσηI/Oκαιδικτύουβρίσκονταισεκατάστασηαναμονής
καιενδέχεταιναμηνλειτουργούνσωστά.Γιαναενεργοποιήσετετησυσκευή,πατήστετο
πλήκτροενεργοποίησης/απενεργοποίησηςWi-Fi,ενεργοποίησης/απενεργοποίησηςλυχνίαςLED,
επαναφοράςήτοπλήκτροWPS.
ΟπαρόνεξοπλισμόςσυμμορφώνεταιμεταόριαέκθεσηςσεακτινοβολίατηςΕΕπουέχουνδιατυπωθεί
γιαμηελεγχόμενοπεριβάλλον.Οσυγκεκριμένοςεξοπλισμόςπρέπειναεγκατασταθείκαιναλειτουργείμε
ελάχιστηαπόσταση20εκμεταξύτηςσυσκευήςακτινοβολίαςκαιτουσώματόςσας.
Όλοιοιτρόποιλειτουργίας:
2.4GHz: 802.11b, 802.11g, 802.11n (HT20), 802.11n (HT40), 802.11ac (VHT20), 802.11ac (VHT40)
5GHz: 802.11a, 802.11n (HT20), 802.11n (HT40), 802.11ac (VHT20), 802.11ac (VHT40), 802.11ac
(VHT80)
Ησυχνότητα,οτρόποςλειτουργίαςκαιημέγιστημεταδιδόμενηισχύςστηνΕΕαναφέρονται
παρακάτω:
2412-2472MHz (802.11g 6Mbps): 19.81 dBm
5180-5240MHz (802.11ac VHT20 MCS0): 20.1 dBm
5260-5320MHz (802.11ac VHT40 MCS0): 21.31 dBm
5500-5700MHz (802.11ac VHT80 MCS0): 27.48 dBm
Ησυσκευήπεριορίζεταισεχρήσησεεσωτερικούςχώρουςότανλειτουργείστηζώνησυχνοτήτων5150
έως5350MHz.
Ηπροσαρμογέαςθαπρέπειναεγκατασταθείκοντάστονεξοπλισμόκαιναείναιεύκολαπροσβάσιμος.
AT BE BG CZ DK EE FR
DE IS IE IT EL ES CY
LV LI LT LU HU MT NL
NO PL PT RO SI SK TR
FI SE CH UK HR
175
Italian
Safety Notices
• Usaquestoprodottoinambientilacuitemperaturasiacompresatra0°C(32°F)e40°C(104°F).
• Consultal'etichettaindicantelapotenzapostasulfondodelprodottoeassicuratichel'adattatoredi
alimentazione sia compatibile con tali valori.
• Noncollocareildispositivosusuperficiirregolarioinstabili.Contattailservizioclientiselochassisè
stato danneggiato.
• NONriporreoggettisopraildispositivoenoninfilarealcunoggettoall'internodeldispositivo.
• NONesporrealiquidi,pioggiaoumidità.NONusareilmodemduranteitemporali.
• NONcoprirelepresed'ariadelprodottoperevitarecheilsistemasisurriscaldi.
• NONutilizzarecavidialimentazione,accessorioperiferichedanneggiate.
• Sel'adattatoreèdanneggiatononprovarearipararlo.Contattauntecnicoqualificatooilrivenditore.
• Perprevenireilrischiodiscosseelettrichescollegailcavodialimentazionedallapresadicorrente
prima di spostare il sistema.
• NONmontatequestodispositivoadun'altezzasuperiorea2metri.
CE statement
Dichiarazione di conformità UE semplificata
ASUSTekComputerInc.conlapresentedichiarachequestodispositivoèconformeairequisitiessenziali
e alle altre disposizioni pertinenti con la direttiva 2014/53/EU. Il testo completo della dichiarazione di
conformitàUEèdisponibileall'indirizzohttps://www.asus.com/Networking/ROG-Rapture-GT-AC2900/
HelpDesk_Declaration/.
Dichiarazione di conformità con la direttiva Ecodesign 2009/125/EC
I test per i requisiti eco-design (EC) N. 1275/2008 e (EU) N. 801/2013 sono stati eseguiti. Quando il
dispositivositrovanellamodalitàStandbydiretelesueinterfaccedireteeI/Osonoinsospensionee
potrebbero non funzionare correttamente. Per riattivare il dispositivo premete uno tra i pulsanti Wi-Fi on/
off, LED on/off, reset o WPS.
QuestoapparecchioèconformeailimitiUE,perl'esposizionearadiazioni,stabilitiperunambientenon
controllato. Questo apparecchio deve essere installato e utilizzato ad una distanza di almeno 20 cm dal
corpo.
Tuttelemodalitàoperative:
2.4GHz: 802.11b, 802.11g, 802.11n (HT20), 802.11n (HT40), 802.11ac (VHT20), 802.11ac (VHT40)
5GHz: 802.11a, 802.11n (HT20), 802.11n (HT40), 802.11ac (VHT20), 802.11ac (VHT40), 802.11ac
(VHT80)
Ivaloridifrequenza,modalitàemassimapotenzaditrasmissioneperl'UEsonoelencatidiseguito:
2412-2472MHz (802.11g 6Mbps): 19.81 dBm
5180-5240MHz (802.11ac VHT20 MCS0): 20.1 dBm
5260-5320MHz (802.11ac VHT40 MCS0): 21.31 dBm
5500-5700MHz (802.11ac VHT80 MCS0): 27.48 dBm
L'utilizzodiquestodispositivoèlimitatoagliambientiinterniquandosistautilizzandolabandadi
frequenze compresa tra i 5150 e i 5350 MHz.
L'adattatore deve essere installato vicino al dispositivo e facilmente accessibile.
AT BE BG CZ DK EE FR
DE IS IE IT EL ES CY
LV LI LT LU HU MT NL
NO PL PT RO SI SK TR
FI SE CH UK HR
176
Norwegian
Safety Notices
• Brukdetteproduktetimiljømedenromtemperaturmellom0°C(32°F)og40°C(104°F).
• Seetikettenpåundersidenavproduktet,ogsørgforstrømforsyningenerisamsvarmeddenne
klassifiseringen.
• MåIKKEplasserespåujevneellerustabileoverflater.Oppsøkservicedersomkassenharblittskadet.
• IKKEplasserellerslippgjenstanderpå,ellerskyvgjenstanderinni,produktet.
• MåIKKEeksponeresforellerbrukesinærhetenavvæsker,regnellerfuktighet.ModemetskalIKKE
brukes under elektrisk storm.
• IKKEdekktilventilenepåproduktetforåforhindreatsystemetblirforvarmt.
• Skadedestrømledninger,tilleggsutstyrellerannetperiferiutstyrskalIKKEbrukes.
• Hvisstrømforsyningenerødelagt,måduikkeprøveårepareredetselv.Kontaktenkvalifisert
servicetekniker eller forhandleren.
• Foråforhindreelektrisksjokk,koblestrømkabelenfradetelektriskeuttaketførduflyttersystemet.
• IKKEmonterdetteutstyretover2meter.
CE statement
Forenklet EU-samsvarserklæring
ASUSTekComputerInc.erklærerhervedatdenneenhetenerisamsvarmedhovedsakligekravogandre
relevanteforskrifteridirektivet2014/53/EU.FullstendigtekstforEU-samsvarserklæringenfinnespå
https://www.asus.com/Networking/ROG-Rapture-GT-AC2900/HelpDesk_Declaration/.
Samsvarserklæring for direktiv om miljøvennlig design 2009/125/EF
Testingformiljøutformingskravihenholdtil(EF)nr.1275/2008og(EU)nr.801/2013erutført.Nårenheten
er i nettverksventemodus, er I/O- og nettverksgrensesnittet i hvilemodus og fungerer kanskje ikke som det
skal.TrykkWi-Fipå/av-,LEDpå/av-,tilbakestill-ellerWPS-knappenforåvekkeenheten.
DetteutstyretsamsvarermedFCC-grenseneforstrålingseksponeringforetukontrollertmiljø.Dette
utstyretbørinstalleresogbrukesmedenminimumsavstandpå20cmmellomradiatorenogkroppendin.
Alle operasjonsmoduser:
2.4GHz: 802.11b, 802.11g, 802.11n (HT20), 802.11n (HT40), 802.11ac (VHT20), 802.11ac (VHT40)
5GHz: 802.11a, 802.11n (HT20), 802.11n (HT40), 802.11ac (VHT20), 802.11ac (VHT40), 802.11ac (VHT80)
Frekvens,modusogmaksimaloverføringskraftiEUeroppførtnedenfor:
2412-2472MHz (802.11g 6Mbps): 19.81 dBm
5180-5240MHz (802.11ac VHT20 MCS0): 20.1 dBm
5260-5320MHz (802.11ac VHT40 MCS0): 21.31 dBm
5500-5700MHz (802.11ac VHT80 MCS0): 27.48 dBm
Enhetenerbegrensettilinnendørsbruknårdenbrukesifrekvensområdet5150til5350MHz.
Adapterenskalplasseresnærtutstyretogværeletttilgjengelig.
AT BE BG CZ DK EE FR
DE IS IE IT EL ES CY
LV LI LT LU HU MT NL
NO PL PT RO SI SK TR
FI SE CH UK HR
177
Portuguese
Safety Notices
• Utilizeesteequipamentoemambientescomtemperaturasentre0˚C(32˚F)e40˚C(104˚F).
• Verifiqueaetiquetarelativaàtensãonaparteinferiordoseudispositivoeassegure-sedequeoseu
transformadorcorrespondeaessatensão.
• NÃOcoloqueocomputadoremsuperfíciesirregularesouinstáveis.Envieparareparaçãoseacaixase
encontrar danificada.
• NÃOcoloquenemdeixecairobjetosemcimadoaparelhoenãointroduzaquaisquerobjetos
estranhos no produto.
• NÃOexponhaoequipamentonemoutilizepróximodelíquidos,chuvaouhumidade.NÃOutilizeo
modemdurantetempestadeseléctricas.
• NÃOtapeosorifíciosdeventilaçãodoprodutoparaimpedirosobreaquecimentodosistema.
• NÃOutilizecabosdealimentação,acessóriosououtrosperiféricosdanificados.
• Seafontedealimentaçãoestiveravariada,nãotenterepará-laporsipróprio.Contacteumtécnico
qualificado ou o seu revendedor.
• Paraevitaroriscodechoqueeléctrico,desligueocabodealimentaçãodatomadaeléctricaantesde
deslocar o sistema.
• NÃOinstaleesteequipamentoaumaalturasuperiora2metros.
CE statement
Declaração de conformidade simplificada da UE
AASUSTekComputerInc.declaraqueestedispositivoestáemconformidadecomosrequisitosessenciais
eoutrasdisposiçõesrelevantesdaDiretiva2014/53/CE.Otextointegraldadeclaraçãodeconformidade
daUEestádisponívelemhttps://www.asus.com/Networking/ROG-Rapture-GT-AC2900/HelpDesk_
Declaration/.
Declaração de conformidade para a Diretiva Conceção Ecológica 2009/125/CE
ForamrealizadostestesderequisitosdeconceçãoecológicadeacordocomoNº1275/2008(CE)eNº
801/2013 (UE). Quando o dispositivo se encontra no modo de espera em rede, a interface de E/S e de rede
encontram-senomododesuspensãoepoderãonãofuncionarcorretamente.Paraativarodispositivo,
primaobotãoparaativar/desativarWi-Fi,ativar/desativaroLED,reporouWPS.
EsteequipamentocumpreoslimitesdeexposiçãoàradiaçãoestabelecidospelaUEparaumambiente
nãocontrolado.Esteequipamentodeveserinstaladoeutilizadoaumadistânciamínimade20cmentreo
transmissor e o seu corpo.
Todos os modos operacionais:
2.4GHz: 802.11b, 802.11g, 802.11n (HT20), 802.11n (HT40), 802.11ac (VHT20), 802.11ac (VHT40)
5GHz: 802.11a, 802.11n (HT20), 802.11n (HT40), 802.11ac (VHT20), 802.11ac (VHT40), 802.11ac
(VHT80)
Afrequência,omodoeapotênciamáximanaUEsãoapresentadosabaixo:
2412-2472MHz (802.11g 6Mbps): 19.81 dBm
5180-5240MHz (802.11ac VHT20 MCS0): 20.1 dBm
5260-5320MHz (802.11ac VHT40 MCS0): 21.31 dBm
5500-5700MHz (802.11ac VHT80 MCS0): 27.48 dBm
Estedispositivoestárestritoautilizaçãonointeriorquandoutilizadonabandadefrequências5.150a
5.350 MHz.
Oadaptadordeveráserinstaladopróximodoequipamentoeestarfacilmenteacessível.
AT BE BG CZ DK EE FR
DE IS IE IT EL ES CY
LV LI LT LU HU MT NL
NO PL PT RO SI SK TR
FI SE CH UK HR
178
Spanish
Safety Notices
• Useesteproductoenentornossometidosaunatemperaturaambientecomprendidaentre0˚C(32
˚F) y 40 ˚C (104 ˚F).
• Consultelaetiquetadevaloresnominalessituadaenlaparteinferiordelproductoyasegúresedeque
suadaptadordealimentacióncumplecondichosvalores.
• NOcoloqueelequiposobreunasuperficieirregularoinestable.Soliciteasistenciatécnicasilacarcasa
resulta dañada.
• NOcoloquenidejecaerobjetosenlapartesuperiordelproductoynointroduzcaobjetosextraños
dentrodeél.
• NOexpongaelequipoalíquidos,lluviaohumedad,nilousecercadeningunodetaleselementos.NO
useelmódemdurantetormentaseléctricas.
• Paraevitarqueelsistemasesobrecaliente,nocubralasranurasdeventilacióndelproducto.
• NOcubralosorificiosdeventilacióndelequipodesobremesaparaevitarqueelsistemasecalienteen
exceso.
• Nointenterepararlafuentedealimentaciónpersonalmentesiseavería.Póngaseencontactoconun
técnicodemantenimientoautorizadooconsudistribuidor.
• Afindeevitarposiblesdescargaseléctricas,desconecteelcabledealimentacióndelatomade
suministroeléctricoantesdecambiarlaposicióndelsistema.
• NOmonteesteequipoaunaalturasuperiora2metros.
CE statement
Declaración de conformidad simplificada para la UE
Por el presente documento, ASUSTek Computer Inc. declara que este dispositivo cumple con los requisitos
esenciales y otras disposiciones pertinentes de la Directiva 2014/53/UE. En https://www.asus.com/
Networking/ROG-Rapture-GT-AC2900/HelpDesk_Declaration/estádisponibleeltextocompletodela
declaracióndeconformidadparalaUE.
Declaración de conformidad para la directiva de ecodiseño 2009/125/CE
Se han realizado pruebas para cumplir los requisitos de ecodiseño conforme a las directivas (CE)
nº1275/2008y(UE)nº801/2013.Cuandoeldispositivoestáenmododeesperayconectadoen
red,suinterfazdeE/Syderedseencuentranenelmododesuspensiónypuedennofuncionar
correctamente.Parareactivareldispositivo,presioneelbotóndeactivaciónydesactivacióndela
funcionalidadWi-Fi,elbotóndeencendidoyapagadodeLED,elbotónderestablecimientooel
botónWPS.
ElequipocumpleloslímitesdeexposiciónderadiacióndelaUEfijadosparaunentornono
controlado.Esteequiposedebeinstalaryutilizaraunadistanciamínimade20cmentreeldispositivo
radiante y su cuerpo.
Todos los modos operativos:
2.4GHz: 802.11b, 802.11g, 802.11n (HT20), 802.11n (HT40), 802.11ac (VHT20), 802.11ac (VHT40)
5GHz: 802.11a, 802.11n (HT20), 802.11n (HT40), 802.11ac (VHT20), 802.11ac (VHT40), 802.11ac
(VHT80)
Acontinuaciónfiguranlafrecuencia,elmodoylapotenciamáximadetransmisiónenlaUE:
2412-2472MHz (802.11g 6Mbps): 19.81 dBm
5180-5240MHz (802.11ac VHT20 MCS0): 20.1 dBm
5260-5320MHz (802.11ac VHT40 MCS0): 21.31 dBm
5500-5700MHz (802.11ac VHT80 MCS0): 27.48 dBm
El dispositivo solamente debe utilizarse en interiores cuando opera en el intervalo de frecuencias de 5150
a 5350 MHz.
Eladaptadordebeestarinstaladocercadelequipoydebedisponerdeunaccesofácil.
AT BE BG CZ DK EE FR
DE IS IE IT EL ES CY
LV LI LT LU HU MT NL
NO PL PT RO SI SK TR
FI SE CH UK HR
179
Swedish
Safety Notices
• Använddennaproduktienmiljömedenomgivandetemperaturmellan0°C(32°F)och40°C(104°F).
• Läsmärketikettenpåproduktensundersida,ochkontrolleraattströmadapternuppfyllerdessa
märkdata.
• PlaceradenINTEpåenojämnellerinstabilarbetsyta.Sökserviceomhöljetharskadats.
• PlaceraochtappaINTEföremålovanpå,ochskjutinteinfrämmandeföremåliprodukten.
• UtsättdenINTEförelleranvändinärhetenavvätskor,iregnellerfukt.ANVÄNDINTEmodemetunder
åskväder.
• TäckINTEöverventilationsöpningarnapåproduktenförattförhindraattsystemetöverhettas.
• ANVÄNDINTEskadadeströmsladdar,tillbehörellerannankringutrustning.
• Omströmförsörjningenavbrytsförsökinteattlagadetsjälv.Kontaktaenkvalificeradservicetekniker
ellerdinåterförsäljare.
• Förattförhindraelektriskastötar,kopplabortelkabelnfrånelnätetinnansystemetflyttas.
• MonteraINTEutrustningenhögreuppän2meter.
CE statement
Förenklad EU-försäkran om överensstämmelse
ASUSTekComputerInc.deklarerarhärmedattdennaenhetuppfyllerväsentligakravochandrarelevanta
bestämmelseridirektiv2014/53/EU.HelatexteniEU-försäkranomöverensstämmelsefinnspåhttps://
www.asus.com/Networking/ROG-Rapture-GT-AC2900/HelpDesk_Declaration/.
Försäkran om överensstämmelse för Ecodesign-direktivet 2009/125/EC
Testförekodesingkravienlighetmed(EC)nr1275/2008och(EU)nr801/2013harutförts.Närenhetenär
istandby-lägeförnätverk,ärgränssnittenförI/Oochnätverkförsattaivilolägeochfungerarkanskeinte
ordentligt.Förattväckaenheten,tryckpåknappenförattslåpå/stängaavWi-Fi,slåpå/stängaavLED,
återställaellerWPS-knappen.
DennautrustninguppfyllerEU:sstrålningexponeringsgränsförenokontrolleradmiljö.Dennautrustning
skallinstallerasochhanteraspåminst20cmavståndmellanstrålkällanochdinkropp.
Allafunktionslägen:
2.4GHz: 802.11b, 802.11g, 802.11n (HT20), 802.11n (HT40), 802.11ac (VHT20), 802.11ac (VHT40)
5GHz: 802.11a, 802.11n (HT20), 802.11n (HT40), 802.11ac (VHT20), 802.11ac (VHT40), 802.11ac (VHT80)
Frekvens,lägeochmaximaltöverfördströmiEUangesnedan:
2412-2472MHz (802.11g 6Mbps): 19.81 dBm
5180-5240MHz (802.11ac VHT20 MCS0): 20.1 dBm
5260-5320MHz (802.11ac VHT40 MCS0): 21.31 dBm
5500-5700MHz (802.11ac VHT80 MCS0): 27.48 dBm
Enhetenärbegränsadtillanvändninginomhusenbartvidanvändninginom5150till5350MHz
frekvensområdet.
Adapternskainstallerasnärautrustningenochskavaralättattkommaåt.
AT BE BG CZ DK EE FR
DE IS IE IT EL ES CY
LV LI LT LU HU MT NL
NO PL PT RO SI SK TR
FI SE CH UK HR
… 56 …

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw ASUS GT-AC2900 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van ASUS GT-AC2900 in de taal/talen: Engels als bijlage per email.

De handleiding is 62,33 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

Andere handleiding(en) van ASUS GT-AC2900

ASUS GT-AC2900 Gebruiksaanwijzing - Deutsch - 152 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info