801478
8
Verklein
Vergroot
Pagina terug
1/57
Pagina verder
12
13
11
18
19
20
14 1615
17
ENGLISH
ANTMIX Series | User manual
14
15
SERIES
User manual | ANTMIX Series
16 POWER ON
This LED is lit green when the mixer is ON.
17 +48V
This two-position switch allows you to turn ON or OFF the phantom power
for condenser microphones:
ON = Switch to the right, LED lit.
OFF = Switch to the left, LED turned off.
WARNING: To prevent loud noises to your sound system, activate the
phantom power only after lowering the levels of the channels and connecting
the microphones.
18 OUTPUT LEVEL
MAIN MIX output level LED indicators.
19 2-TK IN
This knob sets the level of 2-TRACK IN input signal.
20 TO CTRL/ROOM - TO MAIN MIX
Press this switch to assign 2-TRACK IN input signal to CTRL/ROOM or to
MAIN MIX outputs.
21 PHONES CTRL/ROOM
Adjust this knob to set the level for PHONES and CONTROL ROOM outputs.
22 MAIN MIX
Adjust this knob to set MAIN MIX OUTPUT level.
11 PRESETS
This 16 position selector allows you to choose DSP type of effect.
The rst 4 presets emulate different reverbs characterized by sound reflections within
an environment, the next 4 (5-8) are recommended in particular for voice or percussion
in general, stereo delay reproduce the classical delay effect to main signal, nally, there
are the multi-effect combinations (11-16) generally used for complex effects, useful
for voice and a lot of soloist instruments reinforcement.
12 DFX TO MAIN
This knob sets the signal level of the internal effects unit to the main output.
Use it to increase or decrease the amount of processed signal to be sent to the MAIN MIX.
13 STEREO RETURN
This knob sets the signal level of external stereo effects unit to the main output.
Use it to increase or decrease the amount of processed signal to be sent to the MAIN MIX.
14 PEAK
This LED is lit when the signal sent to DFX is too high, and there's a risk to saturate the
internal effect. It's a good setting of the effect sends when the LED flashes occasionally,
only on signal peaks. When the LED remains continuously lit, it is an indication of
saturation. In that case please cut the volume of DFX POST channel sends.
15 MUTE
This button allows you to enable or disable the return signal of the internal effects unit.
8

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw ANT ANTMIX series bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van ANT ANTMIX series in de taal/talen: Duits, Engels, Italiaans als bijlage per email.

De handleiding is 8.6 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info