464389
16
Verklein
Vergroot
Pagina terug
1/36
Pagina verder
16
Installation – for qualied contractors
INSTALLATION
7. Safety
7.1 Country-specic safety information
Observe these installation instructions during installation.
We guarantee trouble-free function and operational
reliability only if the original accessories and spare parts
intended for the appliance are used.
7.2 Instructions, standards and regulations
WARNING Electrocution
All electrical connection and installation work must
be carried out in accordance with VDE regulations
(DIN VDE 0100) [or local regulations], the rules of
your local power supply utility, and relevant national
and local regulations.
WARNING Electrocution
Never use a permanently installed connecting cable.
The appliance must be able to be separated from
the power supply by an isolator that disconnects all
poles with at least 3 mm contact separation.
WARNING Electrocution
Install the appliance in such a way that control
equipment cannot be touched by a person in the
bath or shower.
!
Material losses
Only t the appliance to a vertical wall that is tem-
perature-resistant to at least 85 °C.
Maintain minimum clearances to adjacent surfaces.
Never install the appliance directly below a wall
socket.
!
Material losses
Only remove appliance and accessory packaging at
the installation location; look out for the separate
pack.
When unpacking, ensure that no accessory parts
are left in the packaging.
!
Material losses
Observe the type plate. The specied voltage must
match the mains voltage.
Note
Observe the Building and Garage Regulations [or
local regulations].
Note
When installing the heating appliance in rooms with
a bath and/or shower, observe the safety zone ac-
cording to VDE 0100, section 701, in accordance with
the details on the appliance type plate.
8. Installation
8.1 Appliance installation
To secure the appliance, proceed as follows:
» Unpack the appliance carefully.
» Drill the xing holes in accordance with the
dimensioned drawing in the chapter “Specication”.
» Insert the rawl plugs. The rawl plugs supplied are
suitable for solid walls. For other wall structures,
suitable rawl plugs
must be provided on site.
» Insert the rst screw into the top hole drilled in the
wall, leaving approx. 3 mm of the screw protruding.
Then hook the appliance into the gap between the
wall and the screw head.
» Using the second screw, secure the additional
wall retainer, located at the lower rear part of the
appliance, to the wall.
The appliance can now no longer be removed from
the wall.
8.2 Power supply
» Select a power cable with an adequate
cross-section.
» Install a socket for permanent power supply at a dis-
tance of at least 10 cm from the side of the appliance.
» The power cable must not touch the appliance. Trim
it so it leads directly to the socket. Then strip the
wires and cut the cores to size.
16

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw AEG VH 227 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van AEG VH 227 in de taal/talen: Nederlands, Duits, Engels als bijlage per email.

De handleiding is 4,93 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van AEG VH 227

AEG VH 227 Gebruiksaanwijzing - Deutsch - 16 pagina's

AEG VH 227 Gebruiksaanwijzing - Deutsch - 12 pagina's

AEG VH 227 Gebruiksaanwijzing - Français, Italiano - 16 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info