7
Remove and attach pr
Remove and attach pr
esser foot
esser foot
Remove:
Turn the hand wheel as wide as you can into
your direction until the needle reaches its hig-
hest position.
By lifting the presser foot lever you lift the
presser foot (1).
The presser foot falls down if you lift the lever
at the back of the foot switch (2).
Warning: Do not use force!
Attach:
Put the presser foot on the needle plate so
that the groove at the foot is directly situated
under the groove of the foot holder.
Adjust the threading tension
Adjust the threading tension
If you can pull the thread slightly with a small
resistance out of the bobbin, the threading
tension is correct.
As the lower threading tension is already set
by the factory concerning general sewing, it
needs not to be regulated very often.
In the case of very light or heavy materials,
the lower threading has to be regulated.
Adjust the lower threading
Adjust the lower threading
tension:
tension:
Turn the screw clockwise to increase the
tension.
