English
58
RANDOM (15 on the remote)
Thedisplaywillshow“RANDOM”andthenumberofthe
track that will be played first. All tracks will be played con-
secutively in random order.
FOLDER (4 on the remote)
For MP3 or a CD in MP3 format:
Press these buttons during playback to switch one folder up
or down. The display shortly shows a message, e.g. ALBUM
02. Then the system automatically starts playback of the MP3
CD. When pressing the buttons during stop mode, the mes-
sage will also shortly be shown in the display. Then press
SCAN/ENTERtostartplayback.
SLEEP (7 on the remote)
When the device is switched on, you can set the time after
whichthedevicewillturnintostandbymode;setthetimein
10minutesintervalsfrom90to10minutes.Repeatedlypress
this button until the display shows the desired time. When
the function is activated, the remaining time is displayed
about every 10 seconds. The device will turn off automatically
after the preset time.
To switch off the function again, press the SLEEP button
repeatedly until nothing is shown on the display.
TIMER (6 on the remote)
You may program the device for it to turn off and on again
after a certain preset time.
1. Use
STANDBY ON button to switch into standby
mode (time will be displayed).
2. HolddowntheTIMERbuttonuntilthe“ONTIME”ap-
pears on the display.
• Usingthe / SKIP/TUNESEARCHbuttons(16/13),
you can now set the turn-on hours, turn-on minutes,
turn-off hours, turn-off minutes, turn-on mode and
the turn-on volume.
• ConrmyourinputeachtimewiththeTIMERbutton.
Thecurrentdisplaytobesetashesonthedisplay.
NOTE:
If no button is pressed within around 5 seconds, the
device switches back to standby mode without saving
the input.
3. After you have selected the turn-on volume, press the
TIMERbuttonagain.Thesettingsareshownoneafterthe
other on the display. The device will switch into standby
mode. “
” will be displayed and the timer is activated.
After the set time has been reached, the device switches
to the selected mode. The volume increases slowly to the
selected volume.
PressTIMERtodeactivatethetimerfunction.TIMEOFFis
shownbrieyonthedisplay.“
” will disappear from the
display.
MENU/INFO (15/13)
Pauses the CD or piece of music.
In iPOD Mode:
• FirstpresstheID3/iPOD/MEM/C-ADJ.buttontoactivate
the iPod menu. iPOD MENU appears in the display.
• Nowpressthe
MENU/INFO button to call up the iPod/
iPhone menu or to return to the previous menu.
NOTE:
The Music App must already be started to do this.
In DAB Mode:
Displays the additional information. See section “Listening to
the radio”
“Display additional DAB information”.
MUTE (10 on the remote)
Quicklyturnoffthesound.The“MUTEON”displayashes.
To cancel this function, press
MUTE again.
EQ (11 on the remote)
(Preset equalizer function). There are different sound modes
available(FLAT,CLASSIC,ROCK,POP,JAZZ).
NOTE: During iPod/iPhone Music Playback
For optimum sound, change the EQ setting on your iPod/
iPhone as required.
SELECT/MONO/ST (3 on the remote)
During FM radio mode:
SwitchbetweenSTEREOandMONO.
In DAB Mode:
HolddownthebuttontomanuallyadjustaDABstation.
REPEAT (14 on the remote)
Press1x: (REP_1lightsup)Thecurrenttrackwillbe
repeated entirely.
Press2x: (REP_ALLlightsup)ThecompleteCDwill
be repeated entirely.
Press3x: Allfunctionswillbecanceled.Normalplay-
back will be continued.
Only for MP3s and CDs in MP3 format:
Press1x: Thecurrenttrackwillberepeatedcontinu-
ously(ThedisplaywillshowREP_1).
Press2x: ThecompleteCDwillberepeatedcontinu-
ously(thedisplaywillshowREP_ALL).
Press3x: TheselectedfolderoftheMP3CDwillbe
repeated continuously (the display will show
REP_ALBUM).Use
FOLDER buttons
(4 on the remote) to select the individual
folders.
Press4x: ThefunctionwillbedeactivatedandtheCD
will be played in normal mode.