ENGLISH
60
PBC
By means of the PBC (Playback Control) function the interactive
menus speciied by the manufacturer on the DVDs or VCDs are started
automatically. If you turn the PBC option to “O“ the tracks are played
automatically in order from the DVD or VCD.
NOTE:
If the DVD or VCD is not PBC-compatible no selection menu is displayed
even if the “PBC“ function is switched on.
Audio Setup
Analog Audio Setup
Surround (Downmix)
Change the characteristics of the speaker output:
LT/RT:
K
Choose this setting if you want to play the DVD with the Pro
Logic Dolby stereo efect. This produces a almost real 2-channel replay
eect.
Stereo:
K
Choose this setting if you want to play a DVD, that has been
produced in the 5.1-Audio format, as 2-channel stereo sound.
Dual Mono
The Audio output is normally in stereo. Here you have the possibility to
choose Mono-output instead of Stereo-output.
Stereo:
K
The Audio output is in Stereo (default).
L-Mono:
K
The Audio output is in Mono. In this case the signal of the
“left“ stereo channel is transmitted to all speakers..
R-Mono:
K
The Audio output is in Mono. In this case the signal of the
“right“ stereo channel is transmitted to all speakers.
Mix Mono:
K
The Audio output is in Mono. In this case the signal of the
“both“ stereo channel is transmitted to all speakers.
Dolby-Dynamic
The term “Dynamic“ (Dynamic Range) describes the ratio of quietest and
loudest sound. If the dynamic range is very large, you will experience very
quiet and very loud sounds.
This may cause replay problems.Let us assume that you are wathcing a
DVD in a relatively loud environment. You can now increase the vol-
ume to be able to hear also the very quiet passages,however with the
disadvantage that loud passages will be unacceptably loud. In this case
it would make sense to compress the dynamic range(i.e. reduce) and
increase the output volume at the same time.
FULL - 1/8:
K
The dynamic range is compressed slightly (1/8) to full
(FULL).
OFF:
K
The dynamic range is not compressed at all (default).
