480519
29
Verklein
Vergroot
Pagina terug
1/34
Pagina verder
29
ENGLISH
(2)
Press 1 x = Restart of the song from the beginning.
Press 2 x = Skip to the previous song.
Press 3 x = Skip to the song before the previous song,
etc. Press and hold during playback to
search in reverse through the song.
(2)
Press to skip to the next song and the following songs.
Press and hold during playback to search forward through
the song.
/ENTER (1)
Press this button to activate a function or to display the
next menu.
/ (2)
Press these buttons, to scroll up/down the iPod/iPhone
Menu.
iPod/iPhone Charging
Your iPod/iPhone battery is charged as soon as the iPod/
iPhone is docked. To do this, the unit must be connected
to the mains.
NOTE:
Not all iPod/iPhone generations support the charge
mode.
The duration of the charging process depends on the
iPod/iPhone which is used and its operating condition.
Play Music from the PC
NOTE:
The description may dier depending on the operation
system and its settings.
1. Insert the audio transmitter (14) into a free USB port
of your Windows PC.
2. The rst time you do this, the monitor will display
“Found new hardware”. Wait until your PC has found
and installed the required device drivers.
3. After the device drivers have been installed, click on
“Sound and Audio Devices” in “Control Panel”. In the
tab “Sound” select the option “SYNIC Wireless Audio”
as “Standard device” for “Sound reproduction”.
4. Switch on (ON) the speakers with the speaker ON/OFF
switch (10).
NOTE:
If the speakers have not yet been connected with
the audio transmitter, proceed as described in the
section “Connection of audio transmitter and
speakers”.
5. Now the speakers can be used as PC speakers. Play
your music les on the PC in the usual way (for exam-
ple with the Windows Media Player).
NOTE: Important!
Set a low volume with your music playback program.
Slowly increase the volume only after the speakers
have been switched on. Set a pleasant volume.
6. Adjust the volume with the +/- buttons (6) on the
speakers.
NOTE:
The speakers always are started with the max. volume
when they are switched on.
This operation does not require the base station to be
switched on.
AUX Jack (13)
Connect analogue playback device here. Connect playback
devices such as MP3 player, CD player, etc. to listen to the
music via the speakers.
1. Connect the external device via 3.5 mm stereo jack to
the AUX socket.
2. The unit automatically switches to AUX operation.
3. You will nd further instructions in the manual of
your external sound source.
4. Listen to music playback from external playback
devices via the speakers. Press the +/- buttons (3/6/3)
to set the volume level.
NOTE:
Set the volume of the external device to a reasonable
level.
Charging the Built-in Batteries of the
Speakers
The speakers are operated via built-in rechargeable lithium
batteries.
When the power indication (7) of the speaker lights red,
the charge of the lithium battery is exhausted and the
battery must be recharged.
Proceed as follows to charge the speaker batteries:
1. Set the speakers onto the recessed charging areas of
the base station. The speaker charge indication (4)
ashes blue.
2. Once the speaker charge indication lights with steady
blue, the lithium battery has been charged.
29

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw AEG MC 4447 iP bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van AEG MC 4447 iP in de taal/talen: Duits, Engels, Italiaans, Spaans als bijlage per email.

De handleiding is 3,49 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info