English
42
Remote control
battery installation
NOTE: Note the cable range!
In order to mount the device, ensure a power outlet is within range
of the input lead.
Furthermore, ensure that the device can be connected to your TV
set by an AV cable.
The distance between the wall mounting xtures is 94 mm.
1. Drill two horizontal holes whilst minding this distance.
2. Equip the holes with dowels and screws.
3. Mount the device onto the screws and check if it has been securely
positioned.
4. Connect the mains cable to the mains connection socket (Fig. 1/23).
5. Connect the device to a properly installed power outlet.
Starting up
WARNING:
Leaking out battery acid can damage your health. Remove the battery
from the battery compartment as soon as it is exhausted or if the
remote control is not going to be used for a longer period of time.
Wipe up leaked out battery acid with a cloth. In case of skin contact
immediately wash the aected area. Seek medical advice if battery
acid has been swallowed.In case of contact with your eyes wash out
the eyes and seek medical advice.
CAUTION:
Mismatching battery types or new and used batteries must never be
used together. Dierent battery types have dierent properties. Do
not use old and new batteries together. The mutual use of old and new
batteries can shorten the lifetime of the new batteries and possibly
result in leakage of the old batteries. When disposing of old batteries
you should strictly comply with the legal and environmental regula-
tions applicable in your country. Do not throw batteries into re!
NOTE:
The lifetime of the enclosed batteries may be shortened because of
storage.
1. Open and remove the battery compartment cover.
2. Insert two batteries of type AAA/R03 (1.5 V), ensure correct polarity
(+ and -). Start with the negative pole (-).
3. Attach and close the battery compartment cover.
NOTE:
The signals from the remote control are transmitted to the DVD-Player
by infrared light. You should therefore take care that the DVD-Player is
not exposed to the direct sunlight. This could make the transmission of
signals from the remote control to the DVD-Player impossible.
