775887
6
Verklein
Vergroot
Pagina terug
1/56
Pagina verder
USER
MANUAL
EN User Manual
Washer Dryer
L8WEE165C
CONTENTS
1. SAFETY INFORMATION......................................................................................3
2. SAFETY INSTRUCTIONS.................................................................................... 6
3. PRODUCT DESCRIPTION...................................................................................8
4. TECHNICAL DATA............................................................................................... 9
5. INSTALLATION.....................................................................................................9
6. ACCESSORIES.................................................................................................. 14
7. CONTROL PANEL..............................................................................................15
8. DIAL AND BUTTONS......................................................................................... 17
9. PROGRAMMES..................................................................................................19
10. WI-FI - CONNECTIVITY SETUP................................................................. 26
11. BEFORE FIRST USE........................................................................................29
12. SETTINGS........................................................................................................ 29
13. DAILY USE - WASHING ONLY........................................................................ 30
14. DAILY USE - WASHING & DRYING.................................................................35
15. DAILY USE - DRYING ONLY........................................................................... 36
16. FLUFF IN THE FABRICS..................................................................................37
17. HINTS AND TIPS..............................................................................................38
18. CARE AND CLEANING.................................................................................... 40
19. TROUBLESHOOTING......................................................................................45
20. CONSUMPTION VALUES................................................................................50
21. ENVIRONMENTAL CONCERNS......................................................................53
My AEG Care app
www.aeg.com2
FOR PERFECT RESULTS
Thank you for choosing this AEG product. We have created it to give you
impeccable performance for many years, with innovative technologies that help
make life simpler – features you might not find on ordinary appliances. Please
spend a few minutes reading to get the very best from it.
Visit our website to:
Get usage advice, brochures, trouble shooter, service and repair information:
www.aeg.com/support
Register your product for better service:
www.registeraeg.com
Buy Accessories, Consumables and Original spare parts for your appliance:
www.aeg.com/shop
CUSTOMER CARE AND SERVICE
Always use original spare parts.
When contacting our Authorised Service Centre, ensure that you have the
following data available: Model, PNC, Serial Number.
The information can be found on the rating plate.
Warning / Caution-Safety information
General information and tips
Environmental information
Subject to change without notice.
1. SAFETY INFORMATION
Before the installation and use of the appliance, carefully
read the supplied instructions. The manufacturer is not
responsible for any injuries or damage that are the result
of incorrect installation or usage. Always keep the
instructions in a safe and accessible location for future
reference.
1.1 Children and vulnerable people safety
WARNING!
Risk of suffocation, injury or permanent
disability.
This appliance can be used by children aged from 8
years and above and persons with reduced physical,
sensory or mental capabilities or lack of experience
and knowledge if they have been given supervision or
ENGLISH 3
instruction concerning the use of the appliance in a
safe way and understand the hazards involved.
Children between 3 and 8 years of age and persons
with very extensive and complex disabilities shall be
kept away from the appliance unless continuously
supervised.
Children of less than 3 years of age should be kept
away from the appliance unless continuously
supervised.
Children should be supervised to ensure that they do
not play with the appliance.
Keep all packaging away from children and dispose of
it appropriately.
Keep detergents away from children.
Keep children and pets away from the appliance when
the door is open.
If the appliance has a child safety device, it should be
activated.
Children shall not carry out cleaning and user
maintenance of the appliance without supervision.
1.2 General Safety
Do not change the specification of this appliance.
This appliance is intended to be used in household
and similar applications such as:
staff kitchen areas in shops, offices and other
working environments;
by clients in hotels, motels, bed & breakfast and
other residential type environments;
areas for communal use in blocks of flats or in
launderettes.
The appliance shall be installed as a freestanding
product or below the kitchen worktop if space margins
permit.
Do not install the appliance behind a lockable door, a
sliding door or a door with a hinge on the opposite
side, that would prevent the appliance door from being
fully open.
www.aeg.com4
Connect the mains plug to the mains socket only at
the end of the installation process. Make sure that the
mains plug is accessible after installation.
The ventilation opening in the base must not be
covered by a carpet, mat, or any floor covering.
WARNING: The appliance must not be supplied
through an external switching device, such as a timer,
or connected to a circuit that is regularly switched on
and off by a utility.
Ensure good air ventilation in the room where the
appliance is installed to avoid the backflow of
unwanted gases into the room from appliances
burning gas or other fuels, including open fires.
Exhaust air must not be discharged into a flue which is
used for exhausting fumes from any appliances
burning gas or other fuels.
The operating water pressure at the water entry point
from the outlet connection must be between 0.5 bar
(0.05 MPa) and 8 bar (0.8 MPa).
The appliance maximum load is 10 kg. Do not exceed
the maximum load of each programme (refer to the
"Programmes" chapter).
The appliance must be connected to the water mains
using the new supplied hose sets, or other new hose
sets supplied by the Authorised Service Centre.
Old hose sets must not be reused.
If the mains power supply cable is damaged, it must
be replaced by the manufacturer, its Authorised
Service Centre or similarly qualified persons to avoid
an electrical hazard.
Wipe away lint or packaging debris that has
accumulated around the appliance.
Items that have been soiled with substances such as
vegetable or mineral oil, acetone, alcohol, petrol,
kerosene, spot removers, turpentine, waxes and wax
removers should be washed separately with an extra
amount of detergent before being dried in the washer
dryer.
ENGLISH 5
Do not use the appliance if items have been soiled
with industrial chemicals.
Do not dry unwashed items in the wash dryer.
Items such as foam rubber (latex foam), shower caps,
waterproof textiles, and rubber backed articles and
clothes, or pillows fitted with foam rubber pads should
not be dried in the washer dryer.
Fabric softeners, or similar products, should only be
used as specified by the product manufacturer’s
instructions.
Remove all objects from items that could be a source
of fire ignition such as lighters or matches.
Never stop the washer dryer before the end of the
drying cycle unless all items are quickly removed and
separated so that residual heat can dissipate.
The final part of the washer dryer cycle takes place
without heat (cool down cycle) to ensure that items
reach a temperature that will not cause damage to
them.
Do not use high pressure water sprays and/or steam
to clean the appliance.
Clean the appliance with a moist cloth. Use only
neutral detergents. Do not use abrasive products,
abrasive cleaning pads, solvents or metal objects.
Before any maintenance operation, deactivate the
appliance and disconnect the mains plug from the
socket.
2. SAFETY INSTRUCTIONS
2.1 Installation
The installation must comply
with relevant national
regulations.
Follow the installation instructions
supplied with the appliance.
Do not install or use the appliance
where the temperature can be less
than 0°C or where it is exposed to the
weather.
Always keep the appliance vertical
when it is being moved.
Make sure that there is air circulation
between the appliance and the floor.
Remove all the packaging and the
transit bolts.
The floor area on which the appliance
is to be installed must be flat, stable,
heat resistant and clean.
Keep the transit bolts in a safe place.
If the appliance is to be moved in the
future they must be reattached to lock
www.aeg.com6
the drum to prevent an internal
damage.
Always take care when moving the
appliance as it is heavy. Always use
safety gloves and enclosed footwear.
Do not install or use a damaged
appliance.
Do not install the appliance where the
appliance door cannot be fully
opened.
Adjust the feet to have the necessary
space between the appliance and the
flooring.
When the appliance is in its
permanent position, check if it is
levelled correctly with the aid of a
spirit level. If it is not, adjust the feet
accordingly.
2.2 Electrical Connection
WARNING!
Risk of fire and electric
shock.
WARNING: This appliance is
designed to be installed / connected
to a grounding connection in the
building.
Always use a correctly installed
shockproof socket.
Do not use multi-plug adapters and
extension cables.
Do not pull the mains cable to
disconnect the appliance. Always pull
the mains plug.
Do not touch the mains cable or the
mains plug with wet hands.
2.3 Water Connection
The inlet water shall not exceed
25 °C.
Do not cause damage to the water
hoses.
Before connection to new pipes, pipes
not used for a long time, where repair
work has been carried out or new
devices fitted (water meters, etc.), let
the water flow until it is clean and
clear.
Ensure that there are no visible water
leaks during and after the first use of
the appliance.
Do not use an extension hose if the
inlet hose is too short. Contact the
Authorised Service Centre for the
replacement of the inlet hose.
When unpacking the appliance, It is
possible to see water flowing from the
drain hose. This is due to the testing
of the appliance with the use of water
in the factory.
You can extend the drain hose to
maximum 400 cm. Contact the
Authorised Service Centre for the
other drain hose and the extension.
Make sure that there is access to the
tap after the installation.
2.4 Use
WARNING!
Risk of injury, electric shock,
fire, burns or damage to the
appliance.
Do not put flammable products or
items that are wet with flammable
products in, near or on the appliance.
Do not touch the glass door while a
programme operates. The glass can
get hot.
Do not dry damaged (torn, frayed)
items that contain padding or fillings.
If laundry has been washed with a
stain remover, carry out an additional
rinse cycle before starting a drying
cycle.
Make sure that all metal objects are
removed from the laundry.
Dry only fabrics that are suitable to
dry in the appliance. Follow the
cleaning instruction on the item label.
Do not sit or stand on the open door
of the appliance.
Do not dry dripping wet clothes in the
appliance.
Do not let hot items to touch the
plastic parts of the appliance.
Remove a detergent ball (if used)
before starting a drying programme.
Do not use a detergent ball if setting a
non-stop programme.
2.5 Service
To repair the appliance contact the
Authorised Service Centre. Use
original spare parts only.
Please note that self-repair or non-
professional repair can have safety
ENGLISH 7
consequences and might void the
guarantee.
The following spare parts will be
available for 10 years after the model
has been discontinued: motor and
motor brushes, transmission between
motor and drum, pumps, shock
absorbers and springs, washing drum,
drum spider and related ball bearings,
heaters and heating elements,
including heat pumps, piping and
related equipment including hoses,
valves, filters and aquastops, printed
circuit boards, electronic displays,
pressure switches, thermostats and
sensors, software and firmware
including reset software, door, door
hinge and seals, other seals, door
locking assembly, plastic peripherals
such as detergent dispensers. Please
note that some of these spare parts
are only available to professional
repairers, and that not all spare parts
are relevant for all models.
Concerning the lamp(s) inside this
product and spare part lamps sold
separately: These lamps are intended
to withstand extreme physical
conditions in household appliances,
such as temperature, vibration,
humidity, or are intended to signal
information about the operational
status of the appliance. They are not
intended to be used in other
applications and are not suitable for
household room illumination.
2.6 Disposal
Disconnect the appliance from the
mains electrical and water supplies.
Cut off the mains electrical cable
close to the appliance and dispose of
it.
Remove the door catch to prevent
children or pets from becoming
trapped in the drum.
Dispose of the appliance in
accordance with local requirements
for the disposal of Waste Electrical
and Electronic Equipment (WEEE).
3. PRODUCT DESCRIPTION
3.1 Appliance overview
1 2 3 9
5
6
7
4
10
8
11 12
1Worktop
2Detergent dispenser
3Control panel
4Door handle
www.aeg.com8
5Rating plate
6Drain pump filter
7Feet for levelling the appliance
8Drain hose
9Inlet hose connection
10 Mains cable
11 Transit bolts
12 Hose support
00000000
00A
Mod. xxxxxxxxx
000V ~ 00Hz 0000 W
910000000 00
A
B
C
Prod.No.
D
The rating plate reports the model name
(A), product number (B), electrical ratings
(C) and serial number (D).
4. TECHNICAL DATA
Dimension Width/ Height/ Total
depth
59.7 cm /84.7 cm /66.0 cm
Electrical connection Voltage
Overall power
Fuse
Frequency
230-240 V
2200 W
13 A
50 Hz
Level of protection against ingress of solid particles
and moisture ensured by the protective cover, ex‐
cept where the low voltage equipment has no pro‐
tection against moisture
IPX4
Water supply 1) Cold water
Water supply pressure Minimum
Maximum
0.5 bar (0.05 MPa)
8 bar (0.8 MPa)
Maximum wash load Cotton 10 kg
Maximum dry load Cotton
Synthetics
6 kg
4 kg
Spin Speed Maximum spin speed 1551 rpm
1) Connect the water inlet hose to a water tap with a 3/4'' thread.
5. INSTALLATION
WARNING!
Refer to Safety chapters.
5.1 Unpacking
WARNING!
Remove all the packaging
and the transit bolts before
installing the appliance.
ENGLISH 9
WARNING!
Use the gloves.
1. Remove the external film. If
necessary, use a cutter.
2. Remove the cardboard top and the
polystyrene packaging materials.
3. Remove the internal film.
4. Open the door and remove the
polystyrene piece from the door seal
and all the items from the drum.
5. Carefully put the appliance down on
its rear side.
6. Put the front polystyrene packaging
element on the floor under the
appliance.
Make sure not to
damage the hoses.
7. Remove the polystyrene protection
from the bottom.
1
2
8. Pull up the appliance in vertical
position.
9. Remove the power supply cable and
the drain hose from the hose holders.
www.aeg.com10
It is possible to see
water flowing from the
drain hose. This is due
to the testing with water
of the appliance in
factory.
10. Remove the three bolts by using the
spanner supplied with the appliance.
11. Pull out the plastic spacers.
12. Put the plastic caps, that you find in
the user manual bag, in the holes.
We recommend that you
keep the packaging and the
transit bolts for any
movement of the appliance.
5.2 Positioning and levelling
1. Install the appliance on a flat hard
floor.
Make sure that carpets do
not stop the air circulation
below the appliance.
Make sure that the appliance
does not touch the wall or
other units.
2. Loosen or tighten the feet to adjust
the level.
WARNING!
Do not put cardboard, wood
or equivalent materials
below the appliance feet to
adjust the level.
x4
The appliance must be level and stable.
A correct adjustment of the
appliance level prevents the
vibration, noise and the
movement of the appliance
when in operation.
When the appliance is
installed on a plinth, use the
accessory described in
chapter 'Accessories'. Read
carefully the instructions
supplied with the appliance
and with the accessory.
ENGLISH 11
5.3 The inlet hose
1. Connect the water inlet hose to the
back of the appliance.
2. Position it toward left or right
depending on the position of the
water tap.
20º20º
45º45º
Make sure that the inlet hose
is not in vertical position.
3. If necessary, loose the ring nut to set
it in the correct position.
4. Connect the water inlet hose to the
cold water tap with 3/4" thread.
WARNING!
The inlet water shall not
exceed 25 °C.
CAUTION!
Make sure that there are no
leaks from the couplings.
Do not use an extension
hose if the inlet hose is too
short. Contact the service
centre for the replacement of
the inlet hose.
5.4 Water-stop device
The inlet hose has a water stop device.
This device prevents water leaks in the
hose because of its natural ageing.
The red sector in the window «A» shows
this fault.
A
If this occurs, close the water tap and
contact the authorized service centre to
replace the hose.
5.5 Water drainage
The drain hose should be positioned at a
height of not less than 60 cm and not
more than 100 cm from the floor.
You can extend the drain
hose to maximum 400 cm.
Contact the authorized
service centre for the other
drain hose and the
extension.
It is possible to connect the drain hose in
different ways:
1. Make a U shape with the drain hose
and put it around the plastic hose
guide.
2. On the edge of a sink - Fasten the
guide to the water tap or to the wall.
Make sure that the plastic
guide cannot move when the
appliance drains.
www.aeg.com12
Make sure that the drain
hose end is not immersed in
the water. There may be a
return of dirty water into the
appliance.
3. To a stand pipe with vent-hole -
Insert the drain hose directly into a
drain pipe. Refer to the illustration.
The end of the drain hose
must always be ventilated ,
i.e. the inner diameter of the
drain pipe (min. 38 mm -
min. 1.5") must be larger
than the external diameter of
the drain hose.
4. If the end of the drain hose looks like
this (see the picture), you can push it
directly into the stand pipe.
5. Without the plastic hose guide, to
a sink spigot - Put the drain hose in
the spigot and tighten it with a clamp.
Refer to the illustration.
Make sure that the drain
hose makes a loop to
prevent particles going into
the appliance from the sink.
6. Position the hose directly to a built-
in drain pipe in the room wall and
tighten it with a clamp.
5.6 Electrical connection
At the end of installation you can connect
the mains plug to the mains socket.
The rating plate and the 'Technical Data'
chapter indicate the necessary electrical
ratings. Make sure that they are
compatible with the mains power supply.
Check that your domestic electrical
installation can take the maximum load
required, also taking into account any
other appliances in use.
Connect the appliance to an earthed
socket.
ENGLISH 13
The power supply cable must be easily
accessible after installing the appliance.
For any electrical work required to install
this appliance, contact our Authorised
Service Centre.
The manufacturer does not accept any
responsibility for damage or injury
through failure to comply with the above
safety precaution.
6. ACCESSORIES
6.1 Available in
www.aeg.com/shop or from
authorised dealer
Read carefully the instructions supplied
with the accessory.
Only appropriate
accessories approved by
AEG ensure the safety
standards of the appliance. If
unapproved parts are used,
any claims will be
invalidated.
6.2 Fixing plate kit
If you install the appliance on a plinth
that is not an accessory supplied by
AEG, secure the appliance in the fixing
plates.
Read carefully the instructions supplied
with the accessory.
6.3 Stacking kit
The tumble dryer can be stacked on the
top of the washing machine only by
using the correct stacking kit.
WARNING!
Do not put the tumble dryer
under the washing machine.
Verify the compatible
stacking kit by checking the
depth of your appliances.
6.4 Pedestal with the drawer
To raise your appliance and make
loading and unloading laundry easier.
The drawer can be used for laundry
storage e.g.: towels, cleaning products
and more.
www.aeg.com14
7. CONTROL PANEL
7.1 Control panel description
1Programme dial
2Display
3Drying time touch button (Time
Drying)
4Drying level touch button (Auto
Drying)
5Washing and drying mode touch
button (Mode)
Wash
Dry
6Start and pause touch button (Start/
Pause)
7Anti-stain and prewash touch button
(Stains/Prewash)
Stains
Prewash
8Delay Start touch button (Delay Start)
9Time Saving touch button (Quick)
10 Spin reduction touch button (Spin)
Drain
Spin
11 Temperature touch button
(Temperature)
12 On/Off push button (On/Off)
7.2 Display
MIX
ENGLISH 15
Maximum load indicator. The icon flashes during laundry load esti‐
mation (refer to "PROSENSE load detection" paragraph).
Maximum laundry indicator. It flashes when the laundry load exceeds
the maximum declared load of the selected programme. If you run a
programme when the drum is overloaded, also flashes at the
end of the programme.
Remote connection indicator.
Wi-Fi connection indicator.
Drying time indicator.
Door locked indicator.
The digital indicator can show:
Programme duration (e. g. , washing and/or drying phase).
Delay time (e. g. or ).
Cycle end ( ).
Warning code (e.g. ).
When working with the APP: , (access point), (up‐
date). Please refer to the chapter 'Wi-FI - Connectivity setup'.
Washing phase indicator: it flashes during prewash and wash phase.
Rinsing phase indicator. It flashes during rinse phase.
The permanent Extra Rinse option:
- one additional rinse.
- two additional rinses.
Spin and drain phase indicator. It flashes during spin and drain phase.
MIX
OKO MIX indicator.
Steam phase indicator.
Drying phase indicator.
Child safety lock indicator.
Temperature indicator. The indicator appears when a cold wash is
set.
Spin speed indicator.
Iron drying indicator.
www.aeg.com16
Cupboard drying indicator.
Extra drying indicator.
8. DIAL AND BUTTONS
8.1 On/Off
Pressing this button for a few seconds
allows to activate or deactivate the
appliance. Two different tunes sound
while switching the appliance on or off.
As the Stand-by function automatically
deactivates the appliance to decrease
the energy consumption in a few cases,
you may need to activate the appliance
again.
For more details, refer to Stand-by
paragraph in Daily Use chapter.
8.2 Introduction
The options/functions are
not selectable with all
washing programmes.
Check the compatibility
between options/functions
and washing programmes in
the "Programme Chart". An
option/function can exclude
another one, in this case the
appliance doesn't allow you
to set the incompatible
options/functions together.
Make sure the screen and
touch buttons are always
clean and dry.
8.3 Temperature
When you select a washing programme,
the appliance automatically proposes a
default temperature.
Touch this button repeatedly until the
desired temperature value appears on
the display.
When the display shows the indicators
and , the appliance does not heat
the water.
8.4 Spin
When you set a programme, the
appliance automatically sets the
maximum spin speed allowed.
Touch repeatedly this button to:
Decrease the spin speed.
The display shows only
the spin speeds available
for the set programme.
Set the drain-only option (Skipping
the wash, rinse and spin phases):
Drain.
The appliance performs the only
draining phase of the selected
washing programme.
The display shows the indicator
(cold), and the indicator (no
spin) and the indicator .
Set the spin-only option (Skipping
the wash and rinse phases) : Spin.
Before setting this option,
select a suitable washing
programme for the
garments. The appliance
will performs the most
fitting spin cycle for your
garments care (e.g. For
synthetics items, first
select the Synthetics
washing programme and
then the Spin option).
The appliance performs only the
spinning phase of the selected
washing programme.
The display shows the indicator
(cold), the phase indicator and the
spin speed.
ENGLISH 17
8.5 Stains/Prewash
Press this button repeatedly to activate
one of the two options.
The relevant indicator goes on in the
display.
Stains
Select this option to pre-treat heavily
soiled or stained laundry using stain
remover.
Pour the stain remover into
compartment . The stain remover
is pre-mixed and heated with
detergent in order to improve its
effectiveness.
This option is not
available with a
temperature lower than
40 °C.
Prewash
Use this option to add a prewash
phase at 30 °C before the washing
phase.
This option is recommended for
heavily soiled laundry, especially if
containing sand, dust , mud and other
solid particles.
The options can increase the
programme duration.
These two options cannot be
set together.
8.6 Delay Start
With this option you can delay the start of
a programme in a more convenient time.
Tap on the button repeatedly to set the
required delay. The time increases by
steps of 30 minutes up to 90' and from 2
hours up to 20 h.
After starting the cycle by the means of
the Start/Pause button, the display
shows the selected delay time and the
appliance begins the countdown.
8.7 Quick
With this option you can decrease the
programme duration.
If your laundry is normally or lightly
soiled, it may be advisable to shorten
the washing programme. Touch this
button once to decrease the duration.
In case of smaller load, touch this
button twice to set an extra quick
programme.
On the display the programme duration
is adjusted accordingly.
When this button is set, the led above
the button is on.
This option can also be used
to shorten the steam
programme duration.
8.8 Time Drying
In the programme where it is selectable,
touch this button to set the time that suits
the fabrics you have to dry (refer to
"Timed drying" table). The display shows
the set value.
Each time you touch this button the time
value increases by 5 minutes.
You cannot set all time
values for different types of
fabrics.
8.9 Auto Drying
Touch this button to set one of 3
automatic dryness levels proposed by
the appliance.
On the display the relevant dryness
indicator goes on:
Iron dry: laundry to be
ironed.
Cupboard dry: laundry to be
put in store.
Extra dry: laundry to be fully
dried.
You can not set all
automatic levels for each
type of fabrics.
8.10 Mode
Thanks to this button, a cycle can
perform:
Only washing : Wash indicator is on.
www.aeg.com18
Washing and drying : Wash and Dry
indicators are on.
Only drying : Dry indicator is on.
8.11 Start/Pause
Touch the Start/Pause button to start,
pause the appliance or interrupt a
running programme.
9. PROGRAMMES
9.1 Programme Chart
Programme
Default tempera‐
ture
Temperature
range
Reference
spin speed
Spin speed
range
Maximum
load
Programme description
Eco 40-60 (Wash
only mode)
40 °C1)
1600 rpm
1600 rpm -
400 rpm 10 kg
White cotton and fast-coloured cotton.
Normally soiled items.
Eco 40-60 + Cup‐
board dry level
(Wash & Dry
mode)
40 °C2)
1600 rpm
1600 rpm -
1000 rpm
6 kg
Eco 40-60 + Cup‐
board dry level
(Dry only mode)
- 6 kg White cotton and fast-coloured cotton.
Cottons
40 °C
95 °C - Cold
1600 rpm
1600 rpm -
400 rpm
10 kg
White cotton and coloured cotton. Nor‐
mally, heavily and lightly soiled items.
Synthetics
40 °C
60 °C - Cold
1200 rpm
1200 rpm -
400 rpm
4 kg
Synthetic items or mixed fabric items.
Normally soiled items.
Delicates
30 °C
40 °C - Cold
1200 rpm
1200 rpm -
400 rpm
2 kg
Delicate fabrics such as acrylics, vis‐
cose and mixed fabrics requiring gen‐
tler washing. Normally and lightly soiled
items.
Wool/Handwash
40 °C
40 °C - Cold
1200 rpm
1200 rpm -
400 rpm
2 kg
Machine washable wool, hand washa‐
ble wool and other fabrics with «hand
washing» care symbol3).
ENGLISH 19
Programme
Default tempera‐
ture
Temperature
range
Reference
spin speed
Spin speed
range
Maximum
load
Programme description
Outdoor
30 °C
40 °C - Cold
1200 rpm
1200 rpm -
400 rpm
2 kg
Do not use fabric softener
and make sure that there
is no softener residue in
the detergent dispenser.
Outdoor clothing, technical, sport fab‐
rics, waterproof and breathable jack‐
ets, shell jackets with a removable
fleece or inner insulation.
By performing a combined
wash and dry programme,
the drying phase also acts
as water-repellent restor‐
er. Make sure that the
garment care label per‐
mits tumble drying.
Anti-Allergy
60 °C
1600 rpm
1600 rpm -
400 rpm
10 kg
White cotton items. This high-perform‐
ance wash program removes more than
99,99% of bacteria and viruses4) keeping
the temperature above 60°C throughout
the washing phase; an enhanced rinsing
phase ensures a proper removal of deter‐
gent and micro-organism residues. This
program ensures also a proper reduction
of pollens/allergenic items.
OKOPower
30 °C
60 °C - 30 °C
1600 rpm
1600 rpm -
400 rpm
5 kg
Programme to treat mixed fabrics (cot‐
ton and synthetic item) up to 5 kg.
Complete washing programme that
washes the daily soiled laundry intensive‐
ly and ensures a good performance in
only 59 minutes. Add a drying phase to
have a complete wash&dry treatment.
www.aeg.com20
Programme
Default tempera‐
ture
Temperature
range
Reference
spin speed
Spin speed
range
Maximum
load
Programme description
Steam
1 kg
Steam programmes5)
Steam can be used for dried, washed
or
worn once laundry. These pro‐
grammes can reduce creases and
odours and make your
laundry softer.
Do not use any detergent. If necessa‐
ry, remove
stains by washing or using localized
stain removal.
Steam
programmes do not perform any hy‐
gienic cycle.
Do not set a Steam
programme with these types of items:
Items to be washed at a temperature
lower than 40°C.
Items where it is not specified on the
care label as being suitable for tumble
drying.
Items with label "Dry clean only".
ENGLISH 21
Programme
Default tempera‐
ture
Temperature
range
Reference
spin speed
Spin speed
range
Maximum
load
Programme description
Rinse 1600 rpm
1600 rpm -
400 rpm
10 kg
To rinse and spin the laundry. All fab‐
rics, except woollens and very delicate
fabrics. Reduce the spin speed accord‐
ingly to the type of laundry.
1) According to UK Ecodesign for Energy-Related Products and Energy Information Regulations, this
programme at default temperature and spin speed, in washing only mode, with rated capacity 10 kg is
able to clean normally soiled cotton laundry declared to be washable at 40 °C or 60 °C, together in the
same cycle.
For the reached temperature in the laundry, the programme duration and other data,
please refer to 'Consumption Values' chapter.
The most efficient programmes in terms of energy consumption are generally those that
perform at lower temperatures and longer duration.
2) According to UK Ecodesign for Energy-Related Products and Energy Information Regulations, this
programme at default temperature and spin speed, in washing and drying mode, with rated capacity 6 kg
and with Cupboard dry level performs the wash and dry cycle able to clean normally soiled cotton laundry
declared to be washable at 40 °C or 60 °C, together in the same cycle and, after drying phase, the laun‐
dry can be immediately stored in a cupboard.
3) During this cycle the drum rotates slowly to ensure a gentle wash. It can seem that the drum doesn't
rotate or doesn't rotate properly, but this is normal for this programme.
4) Tested for Staphylococcus aureus, Enterococcus faecium, Candida albicans, Pseudomonas aerugino‐
sa and MS2 Bacteriophage in external test performed by Swissatest Testmaterialien AG in 2021 (Test
Report No. 202120117).
5) If you set a Steam programme with dried laundry, at the end of the cycle the laundry could be humid. It
is better to expose the items to the fresh air for about 10 minutes to let the humidity dry. When the pro‐
gramme is completed, quickly remove the laundry from the drum. After a steam cycle, items may be iron‐
ed however with less effort.
Programme options compatibility
Programme
Eco 40-60
Cottons
Synthetics
Delicates
Wool/Handwash
Outdoor
Anti-Allergy
OKOPower
Steam
Rinse
Options
Spin (Spin reduc‐
tion)
www.aeg.com22
Programme
Eco 40-60
Cottons
Synthetics
Delicates
Wool/Handwash
Outdoor
Anti-Allergy
OKOPower
Steam
Rinse
Options
Drain
Spin1)
Extra Rinse
Prewash
Stains2)
Delay Start
Quick3)
Time Drying
Auto Drying 4)
1) Before setting this option, select a suitable washing programme for the garments. The appliance will
performs the most fitting spin cycle for your garments care (e.g. For synthetics items, first select the Syn‐
thetics washing programme and then the Spin option).
2) This option is not available with temperature lower than 40 °C.
3) If you set the shortest duration, we recommend that you decrease the load size. It is possible to fully
load the appliance, however the washing results can be less satisfactory.
4) Not selectable with Iron Dry level.
Suitable detergents for each programme
Programme Universal
powder1)
Liquid Uni‐
versal
Liquid for
coloureds
Delicates
woollens
Special
Eco 40-60 -- --
ENGLISH 23
Programme Universal
powder1)
Liquid Uni‐
versal
Liquid for
coloureds
Delicates
woollens
Special
Cottons -- --
Synthetics -- --
Delicates -- -- --
Wool/Hand‐
wash -- -- --
Outdoor -- -- --
Anti-Allergy -- --
OKOPower -- --
1) At temperature higher than 60 °C the use of powder detergent is recommended.
▲ = Recommended
-- = Not recommended
9.2 Woolmark Wool Care -
Blue
The wool wash cycle of this machine
has been approved by The Woolmark
Company for the washing of wool
garments labelled as “hand wash”
provided that the products are
washed according to the instructions
on the garment label and those issued
by the manufacturer of this washing
machine. M1361.
The wool drying cycle of this machine
has been tested and approved by The
Woolmark Company. The cycle is
suitable to dry wool garments which
are labelled “hand wash” provided
that the garments are washed in a
Woolmark endorsed hand washing
cycle and dried according to the
instructions issued by the
manufacturer. M1224.
The Woolmark symbol is a Certification
mark in many countries.
9.3 Automatic drying
Initial cycle times for programmes with Auto Drying
option are only estimates, the actual drying time
may slightly differ from the time displayed.
Dryness Level Type of fabric Load
Extra Dry
For towelling materials
Cottons and Linen
(bathrobes, bath towels, etc)
up to 6 kg
www.aeg.com24
Dryness Level Type of fabric Load
For items to be stored
Cottons and Linen
(bathrobes, bath towels, etc)
up to 6 kg
Synthetics and mixed fab‐
rics
(jumpers, blouses, under‐
wear, household and bed lin‐
en)
up to 4 kg
Delicate fabrics
(acrylics, viscose and deli‐
cate mixed fabrics)
up to 2 kg
Wool items
(woollen jumpers)
up to 1 kg
Outdoor sporting garments
(outdoor clothing, technical,
sport fabrics, waterproof and
breathable jackets, shell
jackets)
up to 2 kg
Iron Dry
Suitable for ironing
Cottons and Linen
(sheets, tablecloths, shirts,
etc)
up to 6 kg
9.4 Timed drying
Dryness Level Type of fabric Load (kg)
Spin speed
(rpm)
Suggested
duration
(mins)
Extra Dry
For towelling
materials
Cottons and Linen
(bathrobes, bath towels, etc) 6
1600
245 - 265
4
1600
165 - 185
2
1600
125 - 135
Cupboard Dry
For items to be
stored
Cottons and Linen
(bathrobes, bath towels, etc)
6
1600
235 - 255
4
1600
155 - 175
2
1600
115 - 125
ENGLISH 25
Dryness Level Type of fabric Load (kg)
Spin speed
(rpm)
Suggested
duration
(mins)
Synthetics and mixed fabrics
(jumpers, blouses, underwear, house‐
hold and bed linen)
4
1200
135 - 145
1
1200
40 - 50
Delicates
(acrylics, viscose and delicate mixed
fabrics)
2
1200
140 - 160
1
1200
70 - 80
Wool
(woollen jumpers)
1
1200
110 - 130
Outdoor sporting garments
(outdoor clothing, technical, sport fab‐
rics, waterproof and breathable jackets,
shell jackets)
2
1200
140 - 160
1
1200
70 - 80
Iron Dry
Suitable for iron‐
ing
Cottons and Linen
(sheets, tablecloths, shirts, etc)
6
1600
170 - 190
4
1600
105 - 125
2
1600
75 - 85
10. WI-FI - CONNECTIVITY SETUP
This chapter describes how to connect
the smart appliance to the Wi-Fi network
and to link it to mobile devices.
By this functionality you can receive
notifications, control and monitor your
appliance from your mobile devices.
To connect the appliance to enjoy the full
range of features and services you need:
Wireless network at home with
internet connection enabled.
Mobile device connected to wireless
network.
Frequency/
Protocol
Wi-Fi: 2.4 GHz / 802.11
bgn
Wi-Fi: 5 GHz / 802.11 an
(for indoor use only)
Bluetooth Low Energy
5.0: 2.4 GHz / DSSS
www.aeg.com26
Max Power Wi-Fi 2.4 GHz: <20 dBm
Wi-Fi 5 GHz: <23 dBm
Bluetooth Low Energy
5.0: < 20 dBm
Encryption WPA, WPA2
10.1 Installing and
configuring "My AEG"
"My AEG" allows you to
control your laundry through
a mobile device.
It contains a large number of
programmes, useful features
and product information
tailored perfectly to the
appliance.
Through the app you can
select the programmes
already available from the
appliance control panel, plus
unlock additional
programmes available only
from a mobile device
Additional programmes can
change over the time along
with new versions of the
app.
It's personalized laundry
care - all from your mobile
device.
When connecting the appliance to the
application, stand near it with your smart
device.
Make sure that your smart device is
connected to the wireless network.
1. Go to the App Store on your smart
device.
2. Download and install the App "My
AEG" .
3. Make sure you started a Wi-fi
connection in the appliance. If not,
read the next paragraph 'Configuring
the appliance wireless connection'.
4. Start the application. Select the
country and language and login with
Your email and password. If you do
not have an account, create a new
one following the instructions in "My
AEG" .
5. Follow the instructions on the App for
the appliance registration and
configuration.
10.2 Configuring the
appliance wireless
connection
1. Press the On/Off button for a few
seconds to activate the appliance.
Wait about 10 seconds before
proceeding with wireless
configuration.
2. Select a programme by turning the
programme dial.
3. Press and hold the Auto Drying and
the Mode buttons simultaneously for
a few seconds until a 'click' sounds.
Release the buttons. appears on
the display for 5 seconds and the
indicator starts blinking.
The wireless module begins starting up.
Make sure that you APP is
ready for connection.
4. After about 10 seconds,
(Access Point) appears on the
display.
The access point will be open for about 3
minutes.
5. Configure the "My AEG" app on your
smart device and follow the
instructions to connect the appliance
to your Wi-Fi network.
6. If the connectivity is configured, when
the programme information screen
ENGLISH 27
returns, the indicator is on the
display.
Every time you switch the
appliance on, the appliance
takes about 10 seconds to
connect to the network
automatically. When the
indicator stops blinking
the connection is ready.
To switch the wireless connection off,
press and hold the Auto Drying and the
Mode buttons simultaneously for a few
seconds until the first acoustic signal.
Release the buttons. appears on
the display for 5 seconds.
If you switch the appliance
off and on again, the
wireless connection is
automatically off.
To remove the wireless credentials,
press and hold the Auto Drying and the
Mode buttons simultaneously for 10
seconds until the second acoustic signal:
appears on the display.
10.3 Remote Start
The Remote Start enables you to start a
cycle in remote control.
The Remote Control
activates automatically when
you press the Start/Pause
button to start the
programme, but it is also
possible to start a washing
programme remotely. This
function is deactivates when
door is open.
When the App is installed and the
wireless connection is complete, you
can activate the Remote Start:
Press and hold the Auto Drying and the
Time Drying buttons simultaneously for a
few seconds. The indicator appears on
the display and the door is locked. Now it
is possible to start the programme
remotely.
To remove the Remote Start, press and
hold the Auto Drying and the Time
Drying buttons simultaneously for a few
seconds until the indicator disappears
on the display.
10.4 Over-the-air update
The App may propose an update for your
appliance.
The update is accepted via App only.
If a programme is running, the App
notifies that the update will start at the
end of the programme.
During the update, the appliance shows
in the display.
Do not switch off or unplug the appliance
during update.
The appliance will usable again at the
end of the update, without any
notification about successful update.
If an error occurs, the appliance shows
in the display: just press any
buttons or turn the knob to return to
normal use.
www.aeg.com28
11. BEFORE FIRST USE
During installation or before
first use you may observe
some water in the appliance.
This is a residual water left
in the appliance after a full
functional test in the factory
to ensure the appliance is
delivered to customers in
perfect working order and is
no cause for concern.
1. Make sure that all transit bolts have
been removed from the appliance.
2. Make sure that the electrical power is
available and the water tap is open.
3. Pour 2 litres of water into the
detergent compartment marked by
.
This action activates the drain system.
4. Pour a small quantity of detergent
into the compartment marked by .
5. Set and start a programme for cotton
at the highest temperature without
any laundry in the drum.
This removes all possible dirt from the
drum and the tub.
12. SETTINGS
12.1 Child Lock
With this option you can prevent that the
children play with the control panel.
To activate/deactivate this option,
touch the Spin and the Stains/
Prewash buttons simultaneously until
the indicator comes on/goes off
on the display.
You can activate this option:
After you touch the Start/Pause
button: all the buttons and the
programme dial are deactivated
(except On/Off button ).
Before you touch the Start/Pause
button: the appliance cannot start.
The appliance keeps the selection of this
option after you switch it off.
12.2 Acoustic signals
This appliance is provided with different
acoustic signals, that operate when:
You activate the appliance (special
short tune).
You deactivate the appliance (special
short tune).
You touch the buttons (click sound).
You make a wrong selection (3 short
sounds).
The programme is completed
(sequence of sounds for about 2
minutes).
The appliance has a malfunction
(sequence of short sounds for about 5
minutes).
To deactivate/activate the acoustic
signals when the programme is
completed, touch the Stains/Prewash
and the Delay Start buttons
simultaneously for about 6 seconds.
If you deactivate the
acoustic signals, they
continue operate when the
appliance has a malfunction.
12.3 Permanent Extra Rinse
With this option you can permanently
have one or two extra rinses when you
set a new programme.
Simultaneously touch the
Temperature button and the Spin
button once to add one extra rinse.
appears on the display.
Simultaneously touch the
Temperature button and the Spin
button twice to add two extra rinses.
appears on the display.
Simultaneously touch the
Temperature button and the Spin
button three times to remove extra
rinses. The display only shows .
ENGLISH 29
13. DAILY USE - WASHING ONLY
WARNING!
Refer to Safety chapters.
13.1 Activating the appliance
1. Connect the mains plug to the mains
socket.
2. Open the water tap.
3. Press the On/Off button for a few
seconds to activate the appliance.
The indicator of the Start/Pause
button starts flashing.
The programme dial is automatically set
on default programme and only the
indicator Wash is on above the Mode
button.
The display shows the maximum load,
the default temperature, the maximum
spin speed, the indicators of the phases
making up the programme and the cycle
duration.
13.2 Loading the laundry
1. Open the appliance door.
2. Shake the items before you put them
in the appliance.
3. Put the laundry in the drum, one item
at a time.
Make sure not to put too much laundry in
the drum.
4. Close the door firmly.
CAUTION!
Make sure that no laundry
stays between the seal and
the door. There is a risk of
water leakage or damage to
the laundry.
CAUTION!
Washing heavily oiled,
greasy stains could cause
damage rubber parts of the
washing machine.
13.3 Filling the detergent and
additives
Compartment for prewash phase,
soak programme or stain remover.
Compartment for washing phase.
Compartment for liquid additives
(fabric conditioner, starch).
Maximum level for quantity of liquid
additives.
Flap for powder or liquid detergent.
Always follow the
instructions that you find on
the packaging of the
detergent products, but we
recommend that you do not
exceed the maximum
indicated level ( ). This
quantity will however
guarantee the best washing
results.
After a washing cycle, if
necessary, remove any
detergent residue from the
detergent dispenser.
www.aeg.com30
13.4 Check the position of the
flap
1. Pull out the detergent dispenser until
it stops.
2. Press the lever down to remove the
dispenser.
1
2
3. To use powder detergent, turn the
flap up.
4. To use liquid detergent, turn the flap
down.
With the flap in the
position DOWN:
Do not use gelatinous
or thick liquid
detergents.
Do not put more
liquid detergent than
the limit shown on the
flap.
Do not set the
prewash phase.
Do not set the delay
start function.
5. Measure out the detergent and the
fabric conditioner.
6. Carefully close the detergent
dispenser.
Make sure that the flap does not cause a
blockage when you close the drawer.
13.5 Setting a programme
1. Turn the programme dial to select the
desired washing programme. The
related programme indicator comes
on.
The indicator of the Start/Pause button
flashes.
The display shows the maximum
declared load for the programme, the
default temperature, the maximum spin
speed, the washing phase indicators
(when available) and an indicative
programme duration.
2. To change the temperature and/or
the spin speed, touch the related
buttons.
3. If desired, set one or more options by
touching the related buttons. The
related indicators come on in the
display and the given information
changes accordingly.
ENGLISH 31
To perform washing only,
make sure that only the
Wash indicator is on above
the Mode button.
In case a selection is not
possible, no indicator
comes on and an acoustic
signal sounds.
13.6 Starting a programme
Touch the Start/Pause button to start the
programme.
The related indicator stops flashing and
stays on.
In the display, the indicator of the
operating phase starts flashing.
The programme starts, the door is
locked. The display shows the indicator
.
The drain pump can operate
shortly before the appliance
fills water.
13.7 Starting a programme
with the delay start
1. Touch this repeatedly until the
display shows the desired delay time.
The indicator Delay Start comes on.
2. Touch the Start/Pause button.
The appliance starts the countdown of
the delay start.
When the countdown is completed, the
programme starts.
The ProSense estimation
starts at the end of the
countdown.
Cancelling the delay start
after the countdown has
started
To cancel the delay start:
1. Touch the Start/Pause button to
pause the appliance. The related
indicator flashes.
2. Touch the Delay Start button
repeatedly until the display shows .
3. Touch the Start/Pause button again
to start the programme immediately.
Changing the delay start after
the countdown has started
To change the delay start:
1. Touch the Start/Pause button to
pause the appliance. The related
indicator flashes.
2. Touch the Delay Start button
repeatedly until the display shows the
desired delay time.
3. Touch the Start/Pause button again
to start the new countdown.
13.8 The ProSense load
detection
The programme duration in
the display is referred to a
medium/high load.
After touching the Start/Pause button,
the maximum declared load indicator
goes off, the indicator flashes, the
ProSense starts the laundry load
detection:
1. The appliance detects the load in the
first 30 seconds: the indicator and
the time dots flash, the drum rotates
shortly.
2. At the end of the load detection, the
indicator goes off and the time
dots stop flashing. The programme
duration will be adjusted accordingly
and could increase or decrease. After
further 30 seconds, the water filling
starts.
At the end of the load detection, in case
of drum overload, the indicator is
flashing in the display:
In this case, for 30 seconds, it is possible
to pause the appliance and remove the
exceeding garments.
Once removed the exceeding garments,
touch the Start/Pause button to start the
programme again. The ProSense phase
can be repeated up to three times (see
point 1).
Important! If the laundry amount will not
be reduced, the washing programme
starts anyway, despite the overload. In
www.aeg.com32
this case, it will be not possible to
guarantee the best washing results.
About 20 minutes after the
programme start, the
programme duration could
be adjusted again depending
on the capacity of water
absorption of the fabrics.
The ProSense detection is
carried out with complete
washing programmes only
(no skipping phase
selected).
The ProSense is not
available with some
programmes, such as Wool/
Handwash, programmes
with short cycles and without
washing phase.
13.9 Programme phase
indicators
When the programme starts the indicator
of the running phase flashes and the
other phase indicators are steady on.
E.g. the washing or pre wash phase is
running: .
When the phase ends the relevant
indicator stops flashing and is steady on.
The next phase indicator starts flashing.
E.g. the rinse phase is running:
.
During the washing cycle, the appliance
mixes the detergent, the stain removal
for fabric treatment and/or the fabric
softener with water before introducing
them into the drum; the indicator
MIX
appears and disappears on the display
according to the different programme
phases (the arrows flash alternatively).
If you select the a steam programme, the
steam phase indicator comes on.
13.10 Interrupting a
programme and changing the
options
When the programme is running, you
can change only some options:
1. Touch the Start/Pause button.
The related indicator flashes.
2. Change the options. The given
information in the display changes
accordingly.
3. Touch the Start/Pause button again.
The washing programme continues.
13.11 Cancelling a running
programme
1. Press the On/Off button to cancel the
programme and to deactivate the
appliance.
2. Press the On/Off button again to
activate the appliance.
Now, you can set a new washing
programme.
If the ProSense phase is
already carried out and the
water filling is already
started, the new programme
starts without repeating the
ProSense phase. The water
and the detergent are not
drained out in order to avoid
waste. The display shows
the maximum duration of the
programme, updating it
about 20 minutes after the
starting of the new
programme.
13.12 Opening the door -
Adding garments
While a programme or the delay start
operates, the appliance door is locked.
If the temperature and level
of the water in the drum are
too high and/or the drum still
rotates you cannot open the
door.
1. Touch the Start/Pause button.
In the display the related door lock
indicator goes off.
ENGLISH 33
2. Open the appliance door. If
necessary, add or remove the items.
3. Close the door and touch the Start/
Pause button.
The programme or the delay start
continues.
4. The door can be opened when the
programme is complete. You may
also set a spinning or draining
programme/option and than press
Start/Pause button. If the spin and
drain programmes are not available
in the programme dial, they can be
set via App.
13.13 End of the programme
When the programme has finished, the
appliance stops automatically. The
acoustic signals operate (if they are
active).
In the display all washing phase
indicators become steady and the time
area shows .
The indicator of the Start/Pause button
goes off.
The door unlocks and the indicator
goes off.
flashes at the end of the
programme in case of overloaded drum.
1. Press the On/Off button to deactivate
the appliance.
After five minutes from the end of the
programme, the energy saving function
automatically deactivates the appliance.
When you activate the
appliance again, the display
show the end of the last
selected programme. Turn
the programme dial to set a
new cycle.
2. Remove the laundry from the
appliance.
3. Make sure that the drum is empty.
4. Keep the door and the detergent
dispenser slightly ajar to prevent
mildew and odours.
5. Close the water tap.
13.14 Draining water out after
end of cycle
If you have chosen a programme or an
option that does not empty out the water
of the last rinse, the programme is
completed, but:
The display shows the door locked
indicator
The drum still turns at regular
intervals to prevent the creases in the
laundry.
The door stays locked.
You must drain the water to open the
door:
1. If necessary, touch the Spin button to
decrease the spin speed proposed
by the appliance.
2. Press Start/Pause to continue the
cycle
3. When the programme is completed
and the door locked indicator
goes off, you can open the door.
4. Press the On/Off button a few
seconds to deactivate the appliance.
In any case, the appliance
empties the water out
automatically after
approximately 18 hours.
13.15 Stand-by option
The Stand-by function automatically
deactivates the appliance to decrease
the energy consumption when:
You do not use the appliance for 5
minutes before you touch the Start/
Pause button.
Press the On/Off button to activate
the appliance again.
After 5 minutes from the end of the
washing programme
Press the On/Off button to activate
the appliance again.
The display shows the end of the last
set programme.
Turn the programme dial to set a new
cycle.
www.aeg.com34
If you set a programme or an
option that ends with water
in the drum, the Stand-by
function doesn't deactivate
the appliance to remind you
to drain the water.
14. DAILY USE - WASHING & DRYING
WARNING!
Refer to Safety chapters.
This appliance is an
automatic washer dryer.
14.1 Complete wash&dry
programmes
Non-automatic wash&dry
programmes
In some washing programmes, you can
combine Wash and Dry mode for running
a complete wash&dry programme.
Proceed as follows:
1. After loading laundry and detergent,
press the On/Off button for some
seconds to activate the appliance.
2. Load the laundry one item at a time.
3. Put the detergent and the additives in
the appropriate compartment.
4. Turn the programme dial to the
washing programme. The display
shows the default temperature and
spin. If necessary, change them
according to your laundry. The
display also shows the maximum
recommended load for washing
phase.
5. Set the desired options, if there are
available.
6. Touch the Mode button once to
activate also the drying function. The
Wash and Dry indicators come on.
The indicators and
appear on the display. The display
also shows the maximum
recommended load for a washing
and drying programme (e.g. 6 kg for
cottons).
7. Now, you can choose an automatic
drying level or a specific timed
drying.
14.2 Washing and Drying -
Automatic levels
1. Tap on the Auto Drying button
repeatedly until the display shows the
required dryness level. The indicators
in the display illuminate accordingly:
a. Iron dry: for cotton
items;
b. Cupboard dry: for
cotton and synthetic items;
c. Extra dry: for cotton
items.
The time value on the display is the
duration of both cycles washing and
drying, calculated on a default load
size.
To have a good drying by
using less energy and in a
shorter time, the appliance
does not let you set a too
low spin speed for the items
to be washed and dried.
2. Touch button Start/Pause to start the
programme. The PROSENSE
estimation starts.
In the display the door locked
indicator goes on, the indicator of the
running phase starts flashing.
The display also shows the remaining
programme time.
14.3 Washing and Timed
Drying
1. Tap on the button Time Drying
repeatedly to set the desired time
value (see the "Timed drying" table
ENGLISH 35
the "Programmes" chapter). The
drying level indicator goes off and the
indicator comes on.
Each time you tap on this button the time
value increases by 5 minutes. The
display shows the set new time value.
2. Touch the Start/Pause to start the
programme. The ProSense
estimation starts.
In the display the door locked
indicator comes on and the indicator of
the running phase starts flashing.
The display also shows the remaining
programme time.
14.4 At the end of the drying
programme
The appliance stops automatically.
The acoustic signals operate (if they
are active).
In the display comes on.
The indicator of button Start/Pause
goes off. The door locked goes
off
Press the button On/Off for some
seconds to deactivate the appliance.
After some minutes from
the end of the
programme, the energy
saving function
deactivates the appliance
automatically.
1. Remove the laundry from the
appliance.
2. Make sure that the drum is empty.
After drying phase, clean the
drum, the seal and the inside
of the door with a wet cloth.
15. DAILY USE - DRYING ONLY
WARNING!
Refer to Safety chapters.
This appliance is an
automatic washer dryer.
15.1 Preparation to drying
1. Press the On/Off button for some
seconds to activate the appliance.
With a drying-only
programme the display does
not show the maximum load
and the ProSense estimation
is deactivated.
2. Load the laundry one item at a time.
3. Turn the programme dial to the
programme suitable for the items to
dry.
4. Tap on the Mode button twice to
exclude washing and perform drying
only. The Dry indicator is on. The
indicators and appear on
the display.
When drying a big amount of
laundry, to have good drying
performances, make sure
that the laundry itself is not
rolled up and that is
uniformly distributed in the
drum.
15.2 Drying - Automatic
levels
1. Tap on the Auto Drying button
repeatedly until the display shows the
required dryness level. The indicators
in the display illuminate accordingly:
a. Iron dry: for cotton
items;
b. Cupboard dry: for
cotton and synthetic items;
c. Extra dry: for cotton
items.
The display shows the drying
programme duration.
www.aeg.com36
To have a good drying by
using less energy and in a
shorter time, the appliance
does not let you set a too
low spin speed for the items
to be washed and dried.
2. Touch button Start/Pause to start the
programme.
In the display the door locked
indicator goes on, the indicator of the
running phase starts flashing.
The display also shows the remaining
programme time.
15.3 Timed Drying
1. Tap on the button Time Drying
repeatedly to set the desired time
value (see the "Timed drying" table
the "Programmes" chapter). The
drying level indicator goes off and the
indicator comes on.
Each time you tap on this button the time
value increases by 5 minutes. The
display shows the set new time value.
2. Touch the Start/Pause to start the
programme.
In the display the door locked
indicator comes on and the indicator of
the running phase starts flashing.
The display also shows the remaining
programme time.
15.4 At the end of the drying
programme
The appliance stops automatically.
The acoustic signals operate (if they
are active).
In the display comes on.
The indicator of button Start/Pause
goes off. The door locked goes
off
Press the button On/Off for some
seconds to deactivate the appliance.
After some minutes from
the end of the
programme, the energy
saving function
deactivates the appliance
automatically.
1. Remove the laundry from the
appliance.
2. Make sure that the drum is empty.
After drying phase, clean the
drum, the seal and the inside
of the door with a wet cloth.
16. FLUFF IN THE FABRICS
During the washing and/or drying phase,
some types of fabric, (sponge, wool,
sweatshirt) could release fluff.
The released fluff could stick to the
fabrics during the next cycle.
This inconvenient increases with
technical fabrics.
To prevent the fluff in your laundry:
Do not wash dark fabrics after you
washed and dried light coloured
fabrics (hand towel, wool, sweatshirt )
and the contrary.
Dry this type of fabrics at open air
when they are washed the first time.
Clean the drain filter.
After the drying phase, clean the
empty drum, the gasket and the door
with a wet cloth.
To remove the fluff inside the drum,
proceed as follows:
Empty the drum.
Clean the drum, the gasket and the
door with a wet cloth.
Set the rinse programme.
Simultaneously press the Spin and
the Quick buttons until the display
shows CLE to activate the cleaning
function.
Touch the Start/Pause button to start
the programme.
If the appliance is frequently
used, carry out the CLE
programme regularly.
ENGLISH 37
17. HINTS AND TIPS
WARNING!
Refer to Safety chapters.
17.1 The laundry load
Divide the laundry into: white,
coloured, synthetics, delicates and
wool.
Follow the washing instructions on the
laundry care labels.
Do not wash white and coloured items
together.
Some coloured items can discolour
with the first wash. We recommend
that you wash them separately for the
first couple of times.
Turn multilayered fabrics, wool and
items with printed illustrations inside
out.
Pre-treat stubborn stains.
Wash stubborn stains with a special
detergent.
Be careful with curtains. Remove the
hooks and put the curtains in a
washing bag or pillowcase.
A very small load can cause balance
problems with the spin phase leading
to excessive vibration. If this occurs:
a. interrupt the programme and
open the door (refer to "Daily
Use" chapter);
b. manually redistribute the load so
that the items are spaced evenly
around the tub;
c. press the Start/Pause button.
The spin phase continues.
Button up pillowcases, close zippers,
hooks and poppers. Tie up belts,
cords, shoelaces, ribbons and any
other loose elements.
Do not wash laundry without hems or
with cuts. Use a washing bag to wash
small and/or delicate items (e.g.
underwired bras, belts, tights,
shoelaces, ribbons, etc. ).
Empty pockets and unfold the items.
17.2 Stubborn stains
For some stains, water and detergent is
not sufficient.
We recommend that you pre-treat these
stains before you put the items in the
appliance.
Special stain removers are available.
Use the special stain remover that is
applicable to the type of stain and fabric.
Do not spray stain remover on garments
near the appliance as it is corrosive to
the plastic parts.
17.3 Detergent type and
quantity
The choice of detergent and use of
correct quantities not only affects your
wash performance, but also helps to
avoid waste and protect the environment:
www.aeg.com38
Use only detergents and other
treatments specially made for
washing machines. First, follow these
generic rules:
powder detergents (also tablets
and single-dose detergents) for all
types of fabric, excluding delicate.
Prefer powder detergents
containing bleach for whites and
laundry sanitization,
liquid detergents (also single-dose
detergents) , preferably for low
temperature wash programmes
(60 °C max) for all types of fabric,
or special ones for woollens only.
The choice and quantity of detergent
will depend on: type of fabric
(delicates, woollens, cottons, etc), the
colour of clothes, size of the load,
degree of soiling, wash temperature
and hardness of the water used.
Follow the instructions that you find
on packaging of the detergents or
other treatments without exceeding
the indicated maximum level ( ).
Do not mix different types of
detergents.
Use less detergent if:
you are washing a small load,
the laundry is lightly soiled,
there is large amounts of foam
during washing.
When using detergent tabs or pods,
always put them inside the drum, not
in the detergent dispenser and follow
the manufacturer's
recommendations .
Insufficient detergent may cause:
unsatisfactory washing results,
the wash load to turn grey,
greasy clothes,
mould in the appliance.
Excessive detergent may cause:
sudsing,
reduced washing effect,
inadequate rinsing,
a greater impact for the environment.
17.4 Ecological hints
To save water, energy and to help
protect the environment, we recommend
that you follow these tips:
Normally soiled laundry may be
washed without prewash in order to
save detergent, water and time (the
environment is protected too!).
Loading the appliance to the
maximum capacity indicated for
each programmes helps to reduce
energy and water consumption.
With adequate pre-treatment, stains
and limited soiling can be removed;
the laundry can then be washed at a
lower temperature.
To use the correct quantity of
detergent, refer to the quantity
suggested by the detergent producer
and check the water hardness of you
domestic system. Refer to 'Water
hardness'.
Set the maximum possible spin
speed for the selected programme for
saving energy during drying phase!
17.5 Water hardness
If the water hardness in your area is high
or moderate, we recommend that you
use a water softener for washing
machines. In areas where the water
hardness is soft it is not necessary to use
a water softener.
To find out the water hardness in your
area, contact your local water authority.
Use the correct quantity of water
softener. Follow the instructions that you
find on the packaging of the product.
17.6 Prepare the drying cycle
Open the water tap.
Check if the drain hose is connected
properly. Refer to installation chapter
for more information.
For the maximum laundry load of the
drying programmes, refer to the
drying programmes table.
17.7 Items not suitable for
drying
Do not set a drying programme for
this laundry:
Synthetic curtains.
Pieces of clothing with metal inserts.
Nylon stockings.
Quilts.
Bed covers.
Duvets.
ENGLISH 39
Anoraks.
Sleeping bags.
Fabrics with residue of hair sprays,
nail solvents or similar.
Garments with foam-rubber or
materials similar to foam-rubber.
17.8 Garment labels
When you dry the laundry, obey the
indications on the labels of the
manufacturers:
= The item can be tumble dried
= The drying cycle is at high
temperature
= The drying cycle is at reduced
temperature
= The item can not be tumble
dried.
17.9 Drying cycle duration
The drying time can change depending
on:
speed of the last spin
dryness level
type of laundry
weight of the load
17.10 Additional drying
If, at the end of the drying programme,
the laundry is still damp, set a short
drying cycle again.
WARNING!
To avoid creasing and
shrinkage do not overdry
the laundry.
17.11 General Tips
Refer to the «Drying programmes» table
to find the average drying times.
Experience will help you to dry the
laundry better. Take note of the duration
of the cycles done before.
To avoid the static charge at the end of
the drying cycle:
1. Use fabric conditioner in the washing
cycle.
2. Use special fabric conditioner for
tumble dryers.
When the drying programme is
completed remove the laundry promptly.
18. CARE AND CLEANING
WARNING!
Refer to Safety chapters.
18.1 Periodic cleaning
schedule
Periodic cleaning helps to extend the
life of your appliance.
After each cycle, keep the door and the
detergent dispenser slightly ajar to get air
circulation and dry the humidity inside
the appliance: this will prevent mildew
and odours.
If the appliance is not used for a long
time: close the water tap and unplug the
appliance.
Indicative periodic cleaning schedule:
Descaling Twice a year
Maintenance wash Once a month
Clean door seal Every two months
Clean drum Every two months
Remove fluff inside
the drum Twice a month1)
Clean detergent dis‐
penser
Every two months
Clean drain pump
filter
Twice a year
Clean the inlet hose
and the valve filter
Twice a year
1) Refer to ''Fluff in the fabrics'' chapter.
The following paragraphs explain how
you should clean each part.
www.aeg.com40
18.2 Removing foreign
objects
Make sure that pockets are
empty and all loose
elements are tied up before
running your cycle. Refer to
'The laundry load' in 'Hints
and tips'.
Remove any foreign objects (such as
metal clip, buttons, coins, etc) that you
may find in the door seal, the filters and
the drum. Refer to 'Door seal with double
lip trap', 'Cleaning the drum', 'Cleaning
the drain pump' and 'Cleaning the inlet
hose and the valve filter' paragraphs. If
necessary, please contact the Authorised
Service Centre.
18.3 External cleaning
Clean the appliance with mild soap and
warm water only. Fully dry all the
surfaces.
Do not use a scouring pads or any
scratching material.
CAUTION!
Do not use alcohol, solvents
or chemical products.
CAUTION!
Do not clean the metal
surfaces with chlorine-based
detergent.
18.4 Descaling
If the water hardness in your
area is high or moderate, we
recommend that you use a
water descaling product for
washing machines.
Regularly examine the drum to check for
limescale.
The regular detergents already contain
water softening agents, but we
recommend to run a cycle with empty
drum and a descaling product
occasionally.
Always follow the
instructions that you find on
the packaging of the
product.
18.5 Maintenance wash
The repeated and prolonged use of low
temperature programmes can cause
detergent deposits, fluff residues,
bacterial growth inside the drum and the
tub. This could generate bad odours and
mildew.
To eliminate these deposits and
hygienize the inner part of the appliance,
run a maintenance wash regularly (at
least once a month):
1. Remove all laundry from the drum.
2. Run a cotton programme with the
highest temperature with a small
quantity of powder detergent or, if
available, run the Machine Clean
programme.
18.6 Door seal
This appliance is designed with a self
cleaning draining system, allowing light
fluff fibers that fall off the clothes to be
drained out with the water. Regularly
examine the seal. Coins, buttons, other
small items can be recovered at the end
of the cycle.
Clean it when needed, using ammonia
cream cleanser agent without scratching
the seal surface.
Always obey the instructions
that you find on the
packaging of the product.
ENGLISH 41
18.7 Cleaning the drum
Regularly examine the drum to prevent
unwanted deposits.
Rust deposits in the drum may occur due
to rusting foreign body in the washing or
tap water containing iron.
Clean the drum with special products for
stainless steel.
Always follow the
instructions that you find on
the packaging of the
product.
Do not clean the drum with
acidic descaling products,
scouring products containing
chlorine or iron or steel.
For a thorough clean:
1. Clean the drum with special products
for stainless steel.
Always follow the
instructions that you find on
the packaging of the
product.
2. Run a short cotton programme at
high temperature with empty drum
and with a small quantity of powder
detergent or, if available, run the
Machine Clean programme.
18.8 Cleaning the detergent
dispenser
To prevent possible deposits of dried
detergent or clotted fabric softener
and/or formation of mould in the
detergent dispenser drawer, once in a
while carry out the following cleaning
procedure:
1. Open the drawer. Press the catch
downwards as indicated in the
picture and pull it out.
1
2
2. Remove the top part of the additive
compartment to aid cleaning. Make
sure that all detergent residue is
removed from the upper and lower
part of the recess. Use a small brush
to clean the recess.
3. Flush the detergent drawer out under
running warm water to remove any
traces of accumulated detergent.
After cleaning, replace the top part in
its position.
4. Insert the detergent drawer into the
guide rails and close it. Run the
rinsing programme without any
clothes in the drum.
www.aeg.com42
18.9 Cleaning the drain pump
WARNING!
Disconnect the mains plug
from the mains socket.
Regularly check the drain
pump filter and make sure
that it is clean.
Clean the drain pump if:
The appliance does not drain the
water.
The drum does not turn.
The appliance makes an unusual
noise because of the blockage of the
drain pump.
The display shows the alarm code
.
WARNING!
Do not remove the filter
while the appliance
operates.
Do not clean the pump if
the water in the appliance
is hot. Wait until the water
cools down
Proceed as follows to clean the pump:
1. Open the pump cover.
1
2
2. Place a suitable bowl below the drain
pump access to collect the water that
flows out.
3. Open the chute downwards. Always
keep a rag nearby to dry up any
water spillages when removing the
filter.
4. Turn the filter 180 degrees in anti-
clockwise direction to open it, without
removing. Let the water flow out.
5. When the bowl is full of water, turn
the filter back and empty the
container.
6. Repeat the steps 4 and 5 until the
water stops to flow out.
ENGLISH 43
7. Turn the filter anti-clockwise to
remove it.
1
2
8. If it is necessary, remove fluff and
objects from the filter recess.
9. Make sure that the impeller of the
pump can rotate. If it does not rotate,
contact the Authorised Service
Centre.
10. Clean the filter under the water tap.
11. Put the filter back into the special
guides by turning it clockwise. Make
sure that you tighten the filter
correctly to prevent leakages.
2
1
12. Close the pump cover.
2
1
When you drain the water with the
emergency drain procedure, you must
activate the drain system again:
a. Put 2 litres of water in the main
wash compartment of the
detergent dispenser.
b. Start the programme to drain the
water.
18.10 Cleaning the inlet hose
and the valve filter
It is recommended to clean both the
filters of the inlet hose and valve
occasionally to remove any deposit,
collected over the time:
1. Remove the inlet hose from the tap
and clean the filter.
1
2
3
www.aeg.com44
2. Remove the inlet hose from the
appliance by loosening the ring nut.
3. Clean the valve filter on the back of
the appliance with a toothbrush.
4. When you reconnect the hose to the
back of the appliance, turn it left or
right (not in vertical position)
depending on the position of your
water tap.
45°
20°
18.11 Emergency drain
If the appliance cannot drain the water,
carry out the same procedure, described
in 'Cleaning the drain pump' paragraph. If
necessary, clean the pump.
When you drain the water with the
emergency drain procedure, you must
activate the drain system again:
1. Put 2 litres of water in the main wash
compartment of the detergent
dispenser.
2. Start the programme to drain the
water.
18.12 Frost precautions
If the appliance is installed in an area
where the temperature can reach the
values around 0° C or drop below,
remove the remaining water from the
inlet hose and the drain pump.
1. Disconnect the mains plug from the
mains socket.
2. Close the water tap.
3. Put the two ends of the inlet hose in
a container and let the water flow out
of the hose.
4. Empty the drain pump. Refer to the
emergency drain procedure.
5. When the drain pump is empty,
install the inlet hose again.
WARNING!
Make sure that the
temperature is higher than
0 °C before you use the
appliance again.
The manufacturer is not
responsible for damages
caused by low temperatures.
19. TROUBLESHOOTING
WARNING!
Refer to Safety chapters.
ENGLISH 45
19.1 Alarm Codes and Possible failures
The appliance does not start or it stops during operation. First try to find a solution to the
problem (refer to the tables).
WARNING!
Deactivate the appliance before carrying out any check.
With some problems, the display shows an alarm code and the
Start/Pause button may flash continuously:
If the appliance is overloaded, remove some items
from the drum and/or keep pressed the door while
touching the Start/Pause button until the indicator
stops flashing (see the picture below).
Problem Possible solution
The appliance does
not fill with water prop‐
erly.
Make sure that the water tap is open.
Make sure that the pressure of the water supply is not too low.
For this information, contact your local water authority.
Make sure that the water tap is not clogged.
Make sure that the inlet hose has no kinks, damages or
bends.
Make sure that the connection of the water inlet hose is cor‐
rect.
Make sure that the filter of the inlet hose and the filter of the
valve are not clogged. Refer to 'Care and cleaning'.
The appliance does
not drain the water.
Make sure that the sink spigot is not clogged.
Make sure that the drain hose has no kinks or bends.
Make sure that the drain filter is not clogged. Clean the filter, if
necessary. Refer to "Care and cleaning".
Make sure that the connection of the drain hose is correct.
Set the drain programme if you set a programme without drain
phase. If the drain programme is not available in the pro‐
gramme dial, it can be set via App.
Set the drain programme if you set an option which ends with
water in the tub.
www.aeg.com46
The appliance door is
open or not closed
correctly.
Make sure that the door is properly closed.
Internal fail. No com‐
munication between
electronic elements of
the appliance.
The programme was not finished properly or the appliance
stopped too early. Switch the appliance off and on again.
If the alarm code appears again, contact the Authorised Serv‐
ice Centre.
The mains supply is
unstable.
Wait until mains supply is stable.
The anti-flood device
is on.
Disconnect the appliance and close the water tap. Contact the
Authorised Service Centre.
If the display shows other alarm codes, deactivate and activate the
appliance. If the problem continues, contact the Authorised Service
Centre.
In case of different problem with the washing machine check the
table below for possible solutions.
Problem Possible solution
The programme does
not start.
Make sure that the mains plug is connected to the mains
socket.
Make sure that the appliance door is closed.
Make sure that there is no damaged fuse in the fuse box.
Make sure that the Start/Pause has been touched.
If the delay start is set, cancel the setting or wait for the end of
countdown.
Deactivate the Child Lock function if it is on.
Check the position of the knob on the selected programme.
The appliance fills with
water and drains im‐
mediately.
Make sure that the drain hose is in the correct position. The
hose may be positioned too low. Refer to "Installation instruc‐
tion".
The spin phase does
not operate or the
washing cycle lasts
longer than usual.
Set the spin programme. If the drain programme is not availa‐
ble in the programme dial, it can be set via App’.
Make sure that the drain filter is not clogged. Clean the filter, if
necessary. Refer to "Care and cleaning".
Adjust manually the items in the tub and start the spin phase
again. This problem may be caused by balance problems.
ENGLISH 47
Problem Possible solution
There is water on the
floor.
Make sure that the couplings of the water hoses are tight and
there is not water leakages.
Make sure that the water inlet hose and the drain hose have
no damages.
Make sure you use the correct detergent and the correct
quantity of it.
You cannot open the
appliance door.
Make sure that a washing programme that ends with water in
tub, has not been selected.
Make sure that the washing programme is finished.
Set the drain or the spin programme if there is water in the
drum. If the spin and drain programmes are not available in
the programme dial, they can be set via App.
Make sure that the appliance receives electrical power.
This problem may be caused by a failure of the appliance.
Contact the Authorised Service Centre.
If you need to open the door, please read carefully "Emergen‐
cy door opening".
Make sure that the Remote Start Mode is not activated. Deac‐
tivate it.
The display does not
show the wireless indi‐
cator .
Check the wireless signal.
Make sure that the wireless connection is on. Refer to para‐
graph "Configuring the washing machine wireless connection"
in "Wi-Fi - Connectivity setup" chapter.
Check your home network and router.
Restart the router.
Contact your wireless service provider if there are further
problems with the wireless network.
The App cannot con‐
nect to the appliance.
Check the wireless signal.
Check if your smart device is connected to the wireless net‐
work.
Check your home network and router.
Restart the router.
Contact your wireless service provider if there are problems
with the wireless network.
The appliance, the smart device, or both, need to be config‐
ured again because a new router has been installed or the
router configuration has been changed.
The App cannot fre‐
quently connect to the
appliance.
Make sure that the wireless signal reaches the appliance. Try
to move the home router as near the appliance as possible or
consider purchasing a wireless range extender.
Make sure the wireless signal is not disrupted by microwave.
Turn the microwave off. Avoid using the microwave and the
remote control at the same time.
www.aeg.com48
Problem Possible solution
The display shows
. All buttons are
inactive, except the the
On/Off .
The appliance is downloading any available updates. Wait un‐
til the update process is complete. If you deactivate the appli‐
ance during update, it resumes when you activate the appli‐
ance again.
The appliance makes
an unusual noise and
vibrates.
Make sure the levelling of the appliance is correct. Refer to
"Installation instruction".
Make sure that the packaging and/or the transit bolts are re‐
moved. Refer to "Installation instruction".
Add more laundry in the drum. The load may be too small.
The programme dura‐
tion increases or de‐
creases during pro‐
gramme execution.
The ProSense System is able to adjust the programme dura‐
tion according to the type and the laundry load size. Refer to
"The ProSense System load detection" in "Daily Use" chapter.
The washing results
are not satisfactory.
Increase the detergent quantity or use a different detergent.
Use special products to remove the stubborn stains before
you wash the laundry.
Make sure that you set the correct temperature.
Decrease the laundry load.
Too much foam in the
drum during the wash‐
ing cycle.
Reduce the quantity of detergent or the number of tablets or
single-dose detergents.
After the washing cy‐
cle, there are some
detergent residues in
the dispenser drawer.
Make sure that the flap is in the correct position (UP for pow‐
der detergent - DOWN for liquid detergent).
Make sure you have used the detergent dispenser according
the indications given in this user manual.
The appliance does
not dry or does not dry
correctly.
Turn the water tap on.
Make sure the drain filter is not clogged.
Reduce the laundry load.
Make sure you have set the correct cycle. if necessary, set
again a short drying time.
The laundry is full of
different colours fluff.
The fabrics washed in the previous cycle released fluff of a differ‐
ent colour:
The drying phase helps to eliminate some fluff.
Clean the clothes with a fluff remover.
In case of an excessive amount of fluff in the drum run the special
programme to clean it (refer to “Fluff in the fabrics" for more de‐
tails).
After the check, activate the appliance. The programme continues
from the point of interruption.
If the problem occurs again, contact the Authorised Service Centre.
The necessary data for the service centre are on the rating plate.
ENGLISH 49
19.2 Emergency door
opening
In case of power failure or functioning
failure the appliance door remains
locked. The washing programme
continues when the power is restored. If
the door remains locked in case of
failure, it is possible to open it using the
emergency unlock function.
Before opening the door:
CAUTION!
Risk of burns! Make sure
that the water temperature
is not too high and the
laundry is not hot. If
necessary, wait until they
cool down.
CAUTION!
Risk of injury! Make sure
that the drum is not
rotating. If necessary, wait
until the drum stops
rotating.
Make sure that the water
level inside the drum is
not too high. If necessary,
proceed with an
emergency drain (refer to
«Emergency drain» in
«Care and cleaning»
chapter).
To open the door, proceed as follows:
1. Press the On/Off button to switch the
appliance off.
2. Disconnect the mains plug from the
mains socket.
3. Open the filter flap.
4. Pull the emergency unlock trigger
downward once. Pull it downward
once again, keep it tensed and, in the
meanwhile, open the appliance door.
5. Take out the laundry and then close
the appliance door.
6. Close the filter flap.
20. CONSUMPTION VALUES
20.1 Introduction
See the web link www.theenergylabel.eu for
detailed information about Energy Label.
The QR code on the energy label supplied with the
appliance provides a web link to the product
information sheet. Keep the energy label for
reference together with the user manual and all
other documents provided with this appliance.
www.aeg.com50
20.2 Legend
kg Laundry load. h:mm Programme duration.
kWh Energy consumption. °C Temperature in the laundry.
Litres Water consumption. rpm Spin speed.
%Remaining moisture at the end of the cycle. The higher is the spin speed, the
higher is the noise and the lower is the remaining moisture at the end of washing
cycle.
Values and programme duration may differ depending on different
conditions (e.g. room temperature, water temperature and pressure, load
size and type of laundry, supply voltage) and also if you change the
default setting of a programme.
20.3 According to UK
Ecodesign for Energy-
Related Products and Energy
Information Regulations
Washing only
Eco 40-60 pro‐
gramme kg kWh Litres h:mm % °C rpm1)
Full load 10 0.980 62 3:50 52 39 1551
Half load 5 0.555 45 2:55 52 33 1551
Quarter load 2.5 0.175 39 2:25 54 23 1551
1) Maximum spin speed.
Wash and dry cycle
Eco 40-60 pro‐
gramme and
Cupboard dry
level
kg kWh Litres h:mm % °C rpm1)
Full load 6 4.375 83 7:55 0 33 1551
Half load 3 2.338 51 5:10 0 31 1551
1) Maximum spin speed.
Power consumption in different modes
Off (W) Stand-by (W) Delay start
(W)
Networked
standby (W)
0.50 0.50 4.00 2.001)
ENGLISH 51
Off (W) Stand-by (W) Delay start
(W)
Networked
standby (W)
Time to Off/Standby mode is 15 minutes maximum.
1) The energy consumption of the connected function is approximately 17.5 kWh per year. To disconnect
this function, please refer to the chapter 'Wi-fi - Connectivity setup'.
20.4 Common programmes -
Washing only
These values are indicative only.
Programme kg kWh Litres h:mm % °C rpm1)
Cottons2)
95°C 10 3.15 90 3:50 44 85 1600
Cottons
60°C 10 2.20 85 3:30 44 55 1600
Cottons3)
20°C 10 0.45 85 2:55 44 20 1600
Synthetics
40°C 4 0.80 50 2:25 35 40 1200
Delicates4)
30°C 2 0.30 45 1:10 35 30 1200
Wool
30°C 2 0.25 65 1:05 30 30 1200
1) Reference indicator of the spin speed.
2) Suitable for washing heavily soiled textiles.
3) Suitable for washing lightly soiled cottons, synthetic and mixed fabrics.
4) It also performs as quick washing cycle for lightly soiled laundry.
20.5 Common programmes -
Wash and dry
These values are indicative only.
www.aeg.com52
Programme kg kWh Litres h:mm % °C rpm1)
Synthetics
40°C 4 3.25 100 5:50 1 40 1200
1) Reference indicator of the spin speed.
21. ENVIRONMENTAL CONCERNS
Recycle materials with the symbol .
Put the packaging in relevant containers
to recycle it. Help protect the
environment and human health by
recycling waste of electrical and
electronic appliances. Do not dispose of
appliances marked with the symbol
with the household waste. Return the
product to your local recycling facility or
contact your municipal office.
*
ENGLISH 53
My AEG Care app
The software in this product contains components that are based on free and open source software. AEG gratefully
acknowledges the contributions of the open software and robotics communities to the development project.
To access the source code of these free and open source software components whose license conditions require
publishing, and to see their full copyright information and applicable license terms, please visit:
http://aeg.opensoftwarerepository.com (folder NIU5)
www.aeg.com/shop
157036691-A-412021
6

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw AEG L8WEE165C bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van AEG L8WEE165C in de taal/talen: Engels als bijlage per email.

De handleiding is 1.22 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info