775049
50
Verklein
Vergroot
Pagina terug
1/56
Pagina verder
USER
MANUAL
EN User Manual
Washing Machine
L6FBG941CA
CONTENTS
1. SAFETY INFORMATION......................................................................................3
2. SAFETY INSTRUCTIONS.................................................................................... 5
3. TECHNICAL DATA............................................................................................... 7
4. PRODUCT DESCRIPTION...................................................................................8
5. INSTALLATION.....................................................................................................9
6. ACCESSORIES.................................................................................................. 13
7. CONTROL PANEL..............................................................................................13
8. BEFORE FIRST USE..........................................................................................21
9. THE AUTODOSE TECHNOLOGY (AUTODOSING)..........................................21
10. PROGRAMMES................................................................................................28
11. WI-FI - CONNECTIVITY SETUP................................................................. 32
12. DAILY USE....................................................................................................... 35
13. HINTS AND TIPS..............................................................................................39
14. CARE AND CLEANING.................................................................................... 40
15. TROUBLESHOOTING......................................................................................48
16. CONSUMPTION VALUES................................................................................52
17. QUICK GUIDE.................................................................................................. 54
18. ENVIRONMENTAL CONCERNS......................................................................55
My AEG Care app
www.aeg.com2
FOR PERFECT RESULTS
Thank you for choosing this AEG product. We have created it to give you
impeccable performance for many years, with innovative technologies that help
make life simpler – features you might not find on ordinary appliances. Please
spend a few minutes reading to get the very best from it.
Visit our website to:
Get usage advice, brochures, trouble shooter, service and repair information:
www.aeg.com/support
Register your product for better service:
www.registeraeg.com
Buy Accessories, Consumables and Original spare parts for your appliance:
www.aeg.com/shop
CUSTOMER CARE AND SERVICE
Always use original spare parts.
When contacting our Authorised Service Centre, ensure that you have the
following data available: Model, PNC, Serial Number.
The information can be found on the rating plate.
Warning / Caution-Safety information
General information and tips
Environmental information
Subject to change without notice.
1. SAFETY INFORMATION
Before the installation and use of the appliance, carefully
read the supplied instructions. The manufacturer is not
responsible for any injuries or damage that are the result
of incorrect installation or usage. Always keep the
instructions in a safe and accessible location for future
reference.
1.1 Children and vulnerable people safety
This appliance can be used by children aged from 8
years and above and persons with reduced physical,
sensory or mental capabilities or lack of experience
and knowledge if they have been given supervision or
instruction concerning the use of the appliance in a
safe way and understand the hazards involved.
ENGLISH 3
Children between 3 and 8 years of age and persons
with very extensive and complex disabilities shall be
kept away from the appliance unless continuously
supervised.
Children of less than 3 years of age should be kept
away from the appliance unless continuously
supervised.
Do not let children play with the appliance.
Keep all packaging away from children and dispose of
it appropriately.
Keep detergents away from children.
Keep children and pets away from the appliance when
the door is open.
If the appliance has a child safety device, it should be
activated.
Children shall not carry out cleaning and user
maintenance of the appliance without supervision.
1.2 General Safety
Do not change the specification of this appliance.
This appliance is intended to be used in household
and similar applications such as:
staff kitchen areas in shops, offices and other
working environments;
by clients in hotels, motels, bed & breakfast and
other residential type environments;
areas for communal use in blocks of flats or in
launderettes.
The appliance maximum load is 9 kg. Do not exceed
the maximum load of each programme (refer to the
“Programmes” chapter).
The operating water pressure at the water entry point
from the outlet connection must be between 0.5 bar
(0.05 MPa) and 8 bar (0.8 MPa).
The ventilation opening in the base must not be
covered by a carpet, mat, or any floor covering.
www.aeg.com4
The appliance must be connected to the water mains
using the new supplied hose sets, or other new hose
sets supplied by the Authorised Service Centre.
Old hose sets must not be reused.
If the mains power supply cable is damaged, it must
be replaced by the manufacturer, its Authorised
Service Centre or similarly qualified persons to avoid
an electrical hazard.
Before any maintenance operation, deactivate the
appliance and disconnect the mains plug from the
socket.
Do not use high pressure water sprays and/or steam
to clean the appliance.
Clean the appliance with a moist cloth. Use only
neutral detergents. Do not use abrasive products,
abrasive cleaning pads, solvents or metal objects.
If a tumble dryer is stacked on the top of the washing
machine, make sure to use the correct stacking kit
approved by AEG (see more details in chapter
"Accessories - Stacking kit").
2. SAFETY INSTRUCTIONS
2.1 Installation
The installation must comply
with relevant national
regulations.
Remove all the packaging and the
transit bolts including rubber bush
with plastic spacer.
Keep the transit bolts in a safe place.
If the appliance is to be moved in the
future they must be reattached to lock
the drum to prevent an internal
damage.
Always take care when moving the
appliance as it is heavy. Always use
safety gloves and enclosed footwear.
Follow the installation instructions
supplied with the appliance.
Do not install or use a damaged
appliance.
Do not install or use the appliance
where the temperature can be less
than 0°C or where it is exposed to the
weather.
The floor area on which the appliance
is to be installed must be flat, stable,
heat resistant and clean.
Make sure that there is air circulation
between the appliance and the floor.
When the appliance is in its
permanent position, check if it is
levelled correctly with the aid of a
spirit level. If it is not, adjust the feet
accordingly.
Do not install the appliance directly
above a floor drain.
Do not spray water on the appliance
and do not expose it to excessive
humidity.
Do not install the appliance where the
appliance door cannot be fully
opened.
Do not put a closed container to
collect possible water leakage under
the appliance. Contact the Authorised
ENGLISH 5
Service Centre to ensure which
accessories can be used.
2.2 Electrical connection
WARNING!
Risk of fire and electric
shock.
WARNING: This appliance is
designed to be installed / connected
to a grounding connection in the
building.
Always use a correctly installed
shockproof socket.
Make sure that the parameters on the
rating plate are compatible with the
electrical ratings of the mains power
supply.
Do not use multi-plug adapters and
extension cables.
Make sure not to cause damage to
the mains plug and to the mains
cable. Should the mains cable need to
be replaced, this must be carried out
by our Authorised Service Centre.
Connect the mains plug to the mains
socket only at the end of the
installation. Make sure that there is
access to the mains plug after the
installation.
Do not touch the mains cable or the
mains plug with wet hands.
Do not pull the mains cable to
disconnect the appliance. Always pull
the mains plug.
This appliance is fitted with a 13 A
mains plug. If it is necessary to
change the mains plug fuse, use only
a 13 A ASTA (BS 1362) fuse (UK and
Ireland only).
2.3 Water connection
The inlet water shall not exceed
25 °C.
Do not cause damage to the water
hoses.
Before connection to new pipes, pipes
not used for a long time, where repair
work has been carried out or new
devices fitted (water meters, etc.), let
the water flow until it is clean and
clear.
Ensure that there are no visible water
leaks during and after the first use of
the appliance.
Do not use an extension hose if the
inlet hose is too short. Contact the
Authorised Service Centre for the
replacement of the inlet hose.
When unpacking the appliance, It is
possible to see water flowing from the
drain hose. This is due to the testing
of the appliance with the use of water
in the factory.
You can extend the drain hose to
maximum 400 cm. Contact the
Authorised Service Centre for the
other drain hose and the extension.
Make sure that there is access to the
tap after the installation.
2.4 Use
WARNING!
Risk of injury, electric shock,
fire, burns or damage to the
appliance.
Follow the safety instructions on the
detergent packaging.
Do not put flammable products or
items that are wet with flammable
products in, near or on the appliance.
Do not wash fabrics which are heavily
soiled with oil, grease or other greasy
substances. It can damage rubber
parts of the washing machine.
Prewash such fabrics by hand before
loading them into the washing
machine.
Do not touch the glass door while a
programme operates. The glass can
get hot.
Make sure that all metal objects are
removed from the laundry.
2.5 Service
To repair the appliance contact the
Authorised Service Centre. Use
original spare parts only.
Please note that self-repair or non-
professional repair can have safety
consequences and might void the
guarantee.
The following spare parts will be
available for 10 years after the model
has been discontinued: motor and
motor brushes, transmission between
motor and drum, pumps, shock
absorbers and springs, washing drum,
drum spider and related ball bearings,
www.aeg.com6
heaters and heating elements,
including heat pumps, piping and
related equipment including hoses,
valves, filters and aquastops, printed
circuit boards, electronic displays,
pressure switches, thermostats and
sensors, software and firmware
including reset software, door, door
hinge and seals, other seals, door
locking assembly, plastic peripherals
such as detergent dispensers. Please
note that some of these spare parts
are only available to professional
repairers, and that not all spare parts
are relevant for all models.
Concerning the lamp(s) inside this
product and spare part lamps sold
separately: These lamps are intended
to withstand extreme physical
conditions in household appliances,
such as temperature, vibration,
humidity, or are intended to signal
information about the operational
status of the appliance. They are not
intended to be used in other
applications and are not suitable for
household room illumination.
2.6 Disposal
WARNING!
Risk of injury or suffocation.
Disconnect the appliance from the
mains electrical and water supplies.
Cut off the mains electrical cable
close to the appliance and dispose of
it.
Remove the door catch to prevent
children or pets from becoming
trapped in the drum.
Dispose of the appliance in
accordance with local requirements
for the disposal of Waste Electrical
and Electronic Equipment (WEEE).
3. TECHNICAL DATA
Dimension Width/ Height/ Total depth 59,7 cm /84,7 cm /66,0 cm
Electrical connection Voltage
Overall power
Fuse
Frequency
230-240 V
2200 W
13 A
50 Hz
Level of protection against ingress of solid particles and
moisture ensured by the protective cover, except where
the low voltage equipment has no protection against mois‐
ture
IPX4
Water supply pressure
1)
Minimum
Maximum
0.5 bar (0.05 MPa)
8 bar (0.8 MPa)
Water supply 2) Cold water
Maximum Load Cotton 9 kg
Spin Speed Maximum spin speed 1351 rpm
1) The appliance works correctly if the water pressure is not lower than 0.05 MPa (0.5 bar). If you cannot
connect the water inlet hose to the cold water tap of the primary hydraulic system, connect it to your do‐
mestic cold water storage system. Make sure not to exceed a distance of 5.02 m (16.5 ft) between the
appliance inlet hose and the bottom of the water storage tank.
2) Connect the water inlet hose to a water tap with a 3/4'' thread.
ENGLISH 7
4. PRODUCT DESCRIPTION
4.1 Special features
Your new washing machine meets all
modern requirements for an effective
treatment of laundry with low water,
energy and detergent consumption and
proper care of fabric.
The AutoDose technology
automatically dispenses the right
amount of detergent according to the
load; the drawer has two integrated
tanks (detergent + softener) and two
additional compartments for detergent
and additives manual load. It gives
the highest use flexibility.
The Wi-Fi connection and Remote
Start enable you to start a cycle, to
interact with your washing machine
and to check the washing cycle status
in remote control.
The ProSense technology detects
the laundry load size defining the
programme duration in 30 seconds.
The washing programme is tailored to
the laundry load and the type of fabric
without consuming more time, energy
and water than necessary.
The Intensive option pre-treats
stubborn stains optimizing the
effectiveness of washing
performance.
4.2 Appliance overview
1
1 2 3 9
5
6
7
4
10
8
11 12
1Worktop
2Detergent dispenser with AutoDose
tanks and manual compartments
3Control panel
4Door handle
5Rating plate
6Drain pump filter
7Feet for levelling the appliance
8Drain hose
9Inlet hose connection
10 Mains cable
11 Transit bolts
12 Hose support
www.aeg.com8
00000000
00A
Mod. xxxxxxxxx
000V ~ 00Hz 0000 W
910000000 00
A
B
C
Prod.No.
D
The rating plate reports the model name (A) ,
product number (B), electrical ratings (C) and
serial number (D).
5. INSTALLATION
WARNING!
Refer to Safety chapters.
5.1 Unpacking
1. Open the door. Remove all the items
from the drum.
Accessories delivered
with the appliance may
vary depending on the
model.
2. Put the packaging element on the
floor behind the appliance and
carefully put it down onto its rear
side. Remove the polystyrene
protection from the bottom.
1
2
CAUTION!
Do not lay washing machine
on its front.
3. Put the appliance back into an
upright position. Remove the power
supply cable and the drain hose from
the hose holders.
WARNING!
It is possible to see
water flowing from the
drain hose. This is
because the washing
machine has been
tested at the factory.
4. Remove the three bolts by using the
key supplied with the appliance. Pull
out the plastic spacers.
We recommend that you
keep the packaging and
the transit bolts for any
transport of the appliance.
5. Put the plastic caps, that you find in
the user manual bag, in the holes.
ENGLISH 9
5.2 Installation on suspended
flooring
Suspended wooden floors are
particularly susceptible to vibration.
To limit vibration we recommend placing
a waterproof wooden panel, at least 15
mm thick, under the appliance. It should
be screwed to at least 2 floor beams and
should extend beyond the front feet.
If possible, install the appliance where
the floor is more stable.
5.3 Positioning and levelling
1. Install the appliance on a flat hard
floor.
Make sure that carpets do
not stop the air circulation
below the appliance.
Make sure that the appliance
does not touch the wall or
other units.
2. Loosen or tighten the feet to adjust
the level.
WARNING!
Do not put cardboard, wood
or equivalent materials
below the appliance feet to
adjust the level.
x4
The appliance must be level and stable.
A correct adjustment of the
appliance level prevents the
vibration, noise and the
movement of the appliance
when in operation.
When the appliance is
installed on a plinth or a
tumble dryer is stacked on
the washing machine, use
the accessories described in
chapter 'Accessories'. Read
carefully the instructions
supplied with the appliance
and with the accessory.
5.4 The inlet hose
1. Connect the water inlet hose to the
back of the appliance.
2. Position it toward left or right
depending on the position of the
water tap.
www.aeg.com10
20º20º
45º45º
Make sure that the inlet hose
is not in vertical position.
3. If necessary, loose the ring nut to set
it in the correct position.
4. Connect the water inlet hose to the
cold water tap with 3/4" thread.
WARNING!
The inlet water shall not
exceed 25 °C.
CAUTION!
Make sure that there are no
leaks from the couplings.
Do not use an extension
hose if the inlet hose is too
short. Contact the service
centre for the replacement of
the inlet hose.
5.5 Water drainage
The drain hose should be positioned at a
height of not less than 60 cm and not
more than 100 cm from the floor.
You can extend the drain
hose to maximum 400 cm.
Contact the authorized
service centre for the other
drain hose and the
extension.
It is possible to connect the drain hose in
different ways:
1. Make a U shape with the drain hose
and put it around the plastic hose
guide.
2. On the edge of a sink - Fasten the
guide to the water tap or to the wall.
Make sure that the plastic
guide cannot move when the
appliance drains.
Make sure that the drain
hose end is not immersed in
the water. There may be a
return of dirty water into the
appliance.
3. To a stand pipe with vent-hole -
Insert the drain hose directly into a
drain pipe. Refer to the illustration.
ENGLISH 11
The end of the drain hose
must always be ventilated ,
i.e. the inner diameter of the
drain pipe (min. 38 mm -
min. 1.5") must be larger
than the external diameter of
the drain hose.
4. If the end of the drain hose looks like
this (see the picture), you can push it
directly into the stand pipe.
5. Without the plastic hose guide, to
a sink spigot - Put the drain hose in
the spigot and tighten it with a clamp.
Refer to the illustration.
Make sure that the drain
hose makes a loop to
prevent particles going into
the appliance from the sink.
6. Position the hose directly to a built-
in drain pipe in the room wall and
tighten it with a clamp.
5.6 Electrical connection
At the end of installation you can connect
the mains plug to the mains socket.
The rating plate on the inner edge of the
appliance door and the 'Technical Data'
chapter indicate the necessary electrical
ratings. Make sure that they are
compatible with the mains power supply.
Check that your domestic electrical
installation can take the maximum load
required, also taking into account any
other appliances in use.
Connect the appliance to an earthed
socket.
The power supply cable must be easily
accessible after installing the appliance.
For any electrical work required to install
this appliance, contact our Authorised
Service Centre.
The manufacturer does not accept any
responsibility for damage or injury
through failure to comply with the above
safety precaution.
www.aeg.com12
6. ACCESSORIES
6.1 Available in
www.aeg.com/shop or from
authorised dealer
Read carefully the instructions supplied
with the accessory.
Only appropriate
accessories approved by
AEG ensure the safety
standards of the appliance. If
unapproved parts are used,
any claims will be
invalidated.
6.2 Fixing plate kit
If you install the appliance on a plinth
that is not an accessory supplied by
AEG, secure the appliance in the fixing
plates.
Read carefully the instructions supplied
with the accessory.
6.3 Stacking kit
The tumble dryer can be stacked on the
top of the washing machine only by
using the correct stacking kit.
WARNING!
Do not put the tumble dryer
under the washing machine.
Verify the compatible
stacking kit by checking the
depth of your appliances.
7. CONTROL PANEL
7.1 Control panel description
23
6
12 11 10 8
1
4
5
7
9
ENGLISH 13
The options are not selectable with all washing programmes. Check the
compatibility between options and washing programmes in the "AutoDose
and options compatibility with programmes" paragraph in the
"Programmes" chapter. An option can exclude another one, in this case
the appliance doesn't allow you to set the incompatible options together.
Make sure the screen and touch buttons are always clean and dry.
Programme di‐
al
For selecting the desired washing programme. Refer to "Pro‐
grammes" chapter for more details.
Display It provides information about the setting programme. Refer to
"Display" paragraph for more details.
AutoDose Liq‐
uid Detergent
touch button
For activating and deactivating the automatic detergent loading.
Refer to "The AutoDose Technology (Autodosing)" chapter for
more details.
AutoDose Fab‐
ric Softener
touch button
For activating and deactivating the automatic detergent loading.
Refer to "The AutoDose Technology (Autodosing)" chapter for
more details.
Options touch
button
Press this button repeatedly to activate one of the two following
options:
Extra Rinse option
This option adds a few rinses according to the selected wash‐
ing programme.
Use this option for persons allergic to detergent residues and
in areas where the water is soft.
This option increases slightly the programme
duration.
Skipping wash phase - Rinse Only option
The appliance performs only the rinsing phase, the spinning
and the draining phases of the selected programme.
The corresponding indicator above the touch button illuminates.
Start/Pause
touch button
Touch this button to start, pause the appliance or interrupt a run‐
ning programme.
www.aeg.com14
Intensive/
Prewash touch
button
Press this button repeatedly to activate one of the two options or
both.
The relevant indicator comes on.
Intensive
By setting this option, the indicator appears close to deter‐
gent symbol, and the appliance will automatically dose an ex‐
tra amount of detergent when automatic detergent tank is ena‐
bled.
If automatic detergent tank is Off, it is possible to run this op‐
tion as in traditional washing machine by filling detergent or
additive in the manual compartment.
If you press detergent tank button while Inten‐
sive option is active, AutoDose function is
switched off, but Intensive option still remains
active in manual mode.
Prewash
Use this option to add a pre-wash phase at 30 °C before the
washing phase.
This option is recommended for heavily soiled laundry, espe‐
cially if containing sand, dust, mud and other solid particles.
When selecting a pre-wash phase and Auto‐
Dose is active, the appliance will automatically
dose the detergent. When AutoDose is switch‐
ed off, put the detergent/additive in a dosing
ball inside the drum.
The options can increase the programme dura‐
tion.
ENGLISH 15
Remote/Delay
Start touch
button
Press this button repeatedly to activate one of the two options or
both.
The relevant indicator comes on in the display.
Remote
Select this option to connect appliance with App.
Touch this button, the display shows the indicator blink‐
ing for a few seconds.
After touching the Start/Pause button, the display shows
the indicator and the Remote is confirmed.
When touching the Start/Pause button af‐
ter the indicator stops blinking, the Re‐
mote Start is not activated, but the set pro‐
gramme starts.
Delay Start
With this option you can delay the start of a programme in a
more convenient time.
Touch the button repeatedly to set the required delay. The
time increases by steps of 30 minutes up to 90' and from 2
hours up to 20 h.
After touching the Start/Pause button, the display shows
the indicator and the selected delay time and the appliance
begins the countdown.
Time Save
touch button
With this option you can decrease the programme duration:
Daily
If your laundry is normally or lightly soiled, it may be advisable
to shorten the washing programme. Touch this button once to
decrease the duration.
Super Quick
In case of smaller load, touch this button twice to set an extra
quick programme.
www.aeg.com16
Spin touch but‐
ton
When you set a programme, the appliance automatically selects
the maximum spin speed.
Touch this button repeatedly to:
Decrease the spin speed.
The display shows only the spin speeds avail‐
able for the set programme.
Activate the Rinse Hold option .
The water of the last rinse is not drained out to prevent the fab‐
rics from creasing. The washing programme ends with water in
the drum and the final spin phase is not performed.
The display shows the indicator . The door stays locked.
The drum turns regularly to reduce creasing. You must drain
the water to unlock the door.
Touch Start/Pause button: the appliance performs the spin‐
ning phase and drains the water.
Activate the Quiet option.
All spinning phases (intermediate spin and final spin) are sup‐
pressed and the programme ends with water in the drum. This
helps to reduce creasing.
As the programme is very quiet, it is suitable for use at night
time when cheaper electricity tariffs are available. In some pro‐
grammes the rinses are performed with more water.
The display shows the indicator . The door stays locked.
The drum turns regularly to reduce creasing. You must drain
the water to unlock the door.
Touch the Start/Pause button button: the appliance per‐
forms only the draining phase.
The appliance empties the water out automati‐
cally after approximately 18 hours.
ENGLISH 17
By means of Spin touch button, you can also set:
Drain only
Activate the drain-only option (Skipping the wash, rinse
and spin phases):
The appliance performs the only draining phase of the selec‐
ted washing programme.
The display shows the indicator (cold), the indicator
(no spin) and the indicator .
Spin only
Activate the spin-only option (Skipping the wash and rinse
phases):
Before setting this option, select a suitable
washing programme for the garments. The ap‐
pliance will performs the most fitting spin cycle
for your garments care (e.g. For synthetics
items, first select the Synthetics washing pro‐
gramme and then the Spin only option).
The appliance performs only the spinning phase of the selec‐
ted washing programme.
The display shows the indicator (cold), the phase indica‐
tor and the spin speed.
Temp. touch
button
When you select a washing programme, the appliance automati‐
cally proposes a default temperature.
Touch this button repeatedly until the desired temperature value
appears on the display.
When the display shows the indicators and , the appli‐
ance does not heat the water.
On/Off push
button
Pressing this button for a few seconds allows to activate or deacti‐
vate the appliance. Two different tunes sound while switching the
appliance on or off.
As the Stand-by function automatically deacti‐
vates the appliance to decrease the energy con‐
sumption in a few cases, you may need to acti‐
vate the appliance again.
Refer to "Stand-by option" paragraph in "Daily
Use" chapter for more details.
Permanent Extra
Rinse
With this option you can permanently have an extra rinse.
To activate/deactivate this option touch the Spin button and the
Intensive/Prewash button simultaneously, the relevant indicator
comes on/goes off over rinse phase symbol.
This option adds two rinses.
www.aeg.com18
Child Lock
With this option you can prevent that the children play with the
control panel.
To activate/deactivate this option, touch the Intensive/Prewash
and the Options buttons simultaneously until the indicator
comes on/goes off on the display.
You can activate this option:
After you touch the Start/Pause button: all the buttons and
the programme dial are deactivated (except On/Off button).
Before you touch the Start/Pause button: the appliance
cannot start.
The appliance keeps the selection of this option after you switch it
off.
Acoustic signals
This appliance is provided with different acoustic signals, that op‐
erate when:
You activate the appliance (special short tune).
You deactivate the appliance (special short tune).
You touch the buttons (click sound).
You make a wrong selection (3 short sounds).
The programme is completed (sequence of sounds for about 2
minutes).
The appliance has a malfunction (sequence of short sounds
for about 5 minutes).
To deactivate/activate the acoustic signals when the programme
is completed, touch the Intensive/Prewash and the Delay Start
buttons simultaneously for about 6 seconds.
If you deactivate the acoustic signals, they contin‐
ue operate when the appliance has a malfunction.
7.2 Display
Maximum load indicator. The indicator flashes during the laundry
load estimation (refer to ProSense load detection paragraph) .
ENGLISH 19
Maximum laundry indicator. It blinks if the laundry amount exceeds the
declared load.
Remote connection indicator.
Wi-Fi connection indicator.
Door locked indicator.
Delay start indicator.
The digital indicator can show:
Programme duration (e. g. ).
Delay time (e. g. or ).
Cycle end ( ).
Warning code (e.g. ).
Washing phase indicator. It flashes during pre-wash and wash phase.
Rinsing phase indicator. It flashes during rinse phase.
The indicator appears, when the Extra rinse option is activated
Spinning and draining phase indicator. It flashes during spin and drain
phase.
Drum clean indicator. This is a recommendation to perform the drum
cleaning.
Child safety lock indicator.
Spin speed indicator.
Rinse hold indicator.
Quiet indicator.
Temperature indicator. The indicator appears when a cold wash is
set.
ml
Liquid additives quantity indicator (refer to "The AutoDose" paragraph).
AutoDose detergent tank indicator. When it lights, appliance automati‐
cally dose amount of detergent.
AutoDose softener tank indicator. When it lights, appliance automatical‐
ly dose amount of softener.
AutoDose status indicator. It lights when AutoDose functionality for ad‐
ditives is disable.
www.aeg.com20
Linked mode indicator. It lights when both compartments are linked and
filled with the same detergent. AutoDose functionality for softener, is
disable.
These indicators will appear next to detergent tank and softener
tank indicators when increasing or decreasing the automatic deter‐
gent or softener dosage.
8. BEFORE FIRST USE
During installation or before
first use you may observe
some water in the appliance.
This is a residual water left
in the appliance after a full
functional test in the factory
to ensure the appliance is
delivered to customers in
perfect working order and is
no cause for concern.
1. Make sure that all transit bolts have
been removed from the appliance.
2. Make sure that the electrical power is
available and the water tap is open.
3. Make sure to fill the AutoDose tanks
with liquid detergent and fabric
softener . Refer to "AutoDose
basic setting " paragraph in "The
AutoDose technology" chapter.
4. Pour 2 litres of water inside the drum.
This action activates the drain system.
5. Set and start a programme for cotton
at the highest temperature without
any laundry in the drum.
This removes all possible dirt from the
drum and the tub.
9. THE AUTODOSE TECHNOLOGY (AUTODOSING)
Read this chapter carefully.
9.1 Introduction
Right detergent and fabric softener
dosage takes better care of the laundry
and ensuring good wash performances.
Too much detergent damages your
clothes and too little doesn’t ensure good
wash performances.
This appliance is equipped with an auto
dosing system able to automatically
provide the right detergent and fabric
softener dosage to preserve the fabric
integrity and colour brightness.
AutoDose detergent tank.
AutoDose fabric softener tank.
The appliance is pre-set by the factory
to suit most users habits.
Once started the programme, the
appliance will automatically release the
right amount of detergent and softener
according to the real fabric load, if the
ENGLISH 21
indicators and/or are on in the
display.
In some programmes,
AutoDose is OFF (OFF is on
and the indicators and/or
are off in the display)
because there are garments
requiring special detergents
or treatments. When OFF is
on, pour the detergent and
other treatments in the
proper manual filling
compartment.
Please refer to "AutoDose
and options compatibility
with programmes" in
"Programmes" chapter.
Further explanations on
AutoDose and activation of
advanced settings are
available downloading the
APP.
9.2 Detergent dispenser with
AutoDose tanks and manual
compartments
When using detergent and
any other treatments, always
follow the instructions that
you find on the packaging of
the detergent products.
Anyway, we recommend not
to exceed the maximum
indicated level in each
compartment ( ).
If both AutoDose tanks are enabled in
the set programme, liquid detergent and
fabric softener are automatically loaded.
If one of the AutoDose tank or both
are disabled (OFF ) in the set
programme, proceed by manually filling
the product in the proper compartment.
Manual
AutoDose
(Manual)
WARNING!
Do not put powder
detergent in the AutoDose
compartment.
AutoDose tanks for liquid
detergent and fabric softener
.
Manual compartment for washing
phase: powder or liquid detergent.
When using liquid
detergent, make sure that
the special container for
liquid detergent is
inserted. Refer to the
"Manual filling the
detergent and additives"
paragraph in this chapter.
The liquid detergent
container is supplied
inside the drum.
Manual
Manual compartment for liquid
additives (fabric softener, fabric
conditioner, starch).
Maximum level for detergent/
additives quantity.
www.aeg.com22
9.3 AutoDose basic setting
The factory pre-set doses for a large
load are 90 ml for detergent tank and
25 ml for fabric softener tank: the
optimal configuration to meet majority
of use condition. Based on this
setting, the appliance will calculate
the precise dosage for each wash.
However, under extreme conditions (very
soft or very hard water) and particular
type of detergent (such as super
compact), we recommend to adjust the
pre-set dosage by following the
indication given on detergent and fabric
softener container: e.g when using super
compact detergent you may need to
reduce the pre-set dosage considerably.
If the washing results are not satisfying
or there is too much foam during
washing, you may need to change the
factory setting. Read in the paragraph
'AutoDose configuration mode' how to
change the basic setting, but before:
1. Identify the water hardness level.
Check the water hardness level in
your area. The levels are generally
indicated as: soft, medium and hard.
If necessary, please contact your
local water authority to check the
water hardness in your area.
2. Identify the customized detergent
dosage.
Check the label in the detergent/
fabric softener container suggesting
the quantity to use. This suggestion
is measured combining three
different factors:
Water hardness level (see the
following table);
Normal soil level;
Rated capacity of the appliance
(e.g. maximum load capacity 9
kg). If the rated capacity on the
product container refers to lower
capacity appliances, the
customized dosage should be
increased.
Water hardness levels
Levels Water hardness range
°f1) °d2) °e3) mmol/l ppm
Soft <15 <8 <10 <1.4 <140
Medium4) 15 - 25 8 - 14 0 - 17 1.5 - 2.5 150 - 250
Hard >25 >14 >17 >2.5 >250
1) French degrees
2) German degrees
3) English degrees
4) Factory setting, able to satisfy most of the use conditions.
9.4 AutoDose configuration
mode
Enter the AutoDose
configuration mode before
proceeding with any
programme setting. The
configuration mode may
cancel temporary settings .
1. Press the On/Off button for a few
seconds to activate the appliance.
2. Wait about 10 seconds for appliance
internal check.
3. To enter in configuration mode, hold
pressed the Temp. and the Spin
buttons simultaneously for a few
seconds until the display shows the
on the left in the display and
blinking detergent tank and
softener tank indicators on the
right in the display.
ENGLISH 23
4. Touch related tank buttons to toggle
function off and on. The display
shows OFF when a tank is disabled
or shows tank indicator when it is
enabled.
5. To set basic dosage touch related
tank buttons until default dosage
laundry product and two arrows on
bottom of display appear. Touch the
Temp. button repeatedly to adjust the
dosage upwards and the Spin button
to adjusts it downwards. Minimum
step is 1 ml.
6. After about 10 seconds the display
returns to the programme information
screen or hold pressed the Temp.
and the Spin buttons again to exit
immediately.
9.5 Filling the detergent and
additives on AutoDose
system
Please read "Detergents and
other treatments" in "Hints
and tips" chapter.
We recommend that you do
not exceed the maximum
indicated level ( ).
1. Open the detergent dispenser.
2. Lift up the AutoDose cover lid.
3. Gently pour only liquid detergent in
the AutoDose detergent tank . Fill
up to the maximum indicated level
.
www.aeg.com24
4. Gently pour only liquid softener in the
AutoDose fabric softener tank . Fill
up to the maximum indicated level
.
5. Lift down the AutoDose cover lid.
6. Gently close the detergent dispenser,
till click engagement.
9.6 AutoDose low level
indication
Do not refill the AutoDose
tanks unless appliances
indicates that one or both
tanks are empty.
When the activated tank reaches a low
level of detergent, related indicator blinks
slowly and continuously on the display.
It will stop blinking when the
compartment is refilled.
If tank is not refilled, once a programme
has started, the indicator will stop
blinking and stay steadily lit. Once the
programme is finished, it will start
blinking again.
Unless AutoDose is turned OFF, if a
compartment has reached low level, the
set dosage for that compartment will be
shown by the display for a few seconds
each time the drawer is opened, to
remind refill is needed.
If in both tanks detergent level is low,
both indicators blink, but only the set
dosage for detergent will be displayed.
If the tanks are filled before
the appliance is powered on
for the first time, the
AutoDose indicator will not
blink.
CAUTION!
The tanks refill must be
carries out with the same
brand and type of detergent/
fabric softener/additive used
before, otherwise clean the
tanks before refilling.
ENGLISH 25
9.7 Switching from AutoDose
to manual dosing
It is possible to disable AutoDose
function for one or both tanks by
pressing related button symbol.
Example:
To switch Fabric Softener tank off,
press the button until the display
shows OFF.
If you need to use different detergent
than ones present in AutoDose tanks,
you could switch Detergent tank off by
pressing button until the display
shows OFF.
9.8 Deactivating the
AutoDose
If you prefer to use the compartments for
manual filling as default choice, you can
deactivated the AutoDose tanks
completely.
Once you have entered the AutoDose
configuration mode by pressing Temp.
and the Spin buttons:
1. Tap on the button or button
until display shows : the
AutoDose is excluded completely for
related tank or both.
2. After about 10 seconds the display
returns to the programme information
screen.
9.9 Manual filling the
detergent and additives
You may need to use a different
detergent or fabric softener than the
ones used in the AutoDose tanks. First,
make sure that the AutoDose tanks are
disabled and then pour the detergent
and/or other treatments in the manual
compartments.
Do not exceed the maximum
indicated level ( ).
1. Open the detergent dispenser.
2. Put the powder detergent in the
compartment . When using liquid
detergent, refer to "Manual filling the
liquid detergent".
www.aeg.com26
3. If desired, pour the fabric softener in
the compartment
Manual
.
4. Gently close the detergent dispenser,
till click engagement.
Manual filling the liquid
detergent
1. Insert the container for liquid
detergent.
2. Pour the liquid detergent in the
compartment .
3. Gently close the detergent dispenser,
till click engagement.
If the machine has not been
used for more than 4 weeks
with filled tanks, detergent/
softener can become
viscous or dry out. It is
needed to clean the drawer
as indicated in 'Care and
Cleaning' chapter.
9.10 Drawer open indication
When a programme is running, the
detergent drawer must always be closed.
A sensor in the drawer detects if the
drawer is open (or not properly closed)
while the programme is running. In such
case, the appliance will immediately be
paused.
If you press the Start/Pause button,
an error sound is generated and
everything in the display will turn off
except the AutoDose indicators remain lit
for a few seconds. Then the display
returns to the previous paused state.
ENGLISH 27
This will happen even if the user turned
AutoDose off.
To restart the programme, ensure the
drawer is properly closed and press
Start/Pause button.
10. PROGRAMMES
10.1 Programme Chart
Washing programmes
Programme Programme description
Washing programmes
Eco 40-60 White cotton and fast-coloured cotton. Normally soiled items. The
energy consumption decreases and the time of the washing pro‐
gramme is extended, ensuring good washing results.
Cottons White and coloured cotton heavily and normally soiled cotton items.
Synthetics Synthetic items or mixed fabric items. Normally soiled items.
Delicates Delicate fabrics such as acrylics, viscose and mixed fabrics re‐
quiring gentler washing. Normally and lightly soiled items.
Wool/Silk Machine washable wool, hand washable wool and other fabrics
with «hand washing» care symbol1).
Anti-Allergy White cotton items. This high-performance wash program combined
with steam vapour, removes more than 99,99% of bacteria and viru‐
ses2) keeping the temperature above 60°C throughout the washing
phase; with an additional action on the fibers thanks to a vapour
phase, an enhanced rinsing phase ensures a proper removal of de‐
tergent and micro-organism residues. This program ensures also a
proper reduction of pollens/allergenic items.
20min 3kg Cotton and synthetic items lightly soiled or once worn.
www.aeg.com28
Programme Programme description
Outdoor Do not use fabric softener and make sure that there
is no softener residue in the detergent dispenser.
Outdoor clothing, technical, sport fabrics, waterproof and
breathable jackets, shell jackets with a removable fleece or inner
insulation. The recommended laundry load is 2,5 kg.
This programme can also be used as water-repellent restoring cycle,
specifically tailored for treating clothes with a hydrophobic coating. To
perform the water-repellent restoring cycle, proceed as follows:
Pour the washing detergent in the compartment .
Pour a special water-repellent restorer for fabric in the drawer
compartment for fabric softener
Manual
.
Reduce the laundry load to 1 kg.
To further improve the water-repellent restoring ac‐
tion, dry the laundry in a tumble dryer by setting the
Outdoor drying programme (if available and if the
garment care label permits tumble drying).
Easy Iron Synthetic items requiring a gentle wash. Normally and lightly
soiled items.3)
Spin/Drain All fabrics, except woollens and delicate fabrics. To spin the laun‐
dry and to drain the water in the drum.
1) During this cycle the drum rotates slowly to ensure a gentle wash. It can seem that the drum doesn't
rotate or doesn't rotate properly, but this is normal for this programme.
2) Tested for Staphylococcus aureus, Enterococcus faecium, Candida albicans, Pseudomonas aerugino‐
sa and MS2 Bacteriophage in external test performed by Swissatest Testmaterialien AG in 2021 (Test
Report No. 202120117).
3) To reduce creasing, this cycle regulates the water temperature and performs a soft wash and spin
phase. The appliance adds some rinses.
Programme temperature, maximum spin speed and maximum load
Programme Default temperature
Temperature range
Reference spin
speed
Spin speed range
Maximum load
Washing programmes
Eco 40-60 40 °C 1) 1400 rpm
1400 rpm - 400 rpm 9 kg
Cottons 40 °C
95 °C - Cold
1400 rpm
1400 rpm - 400 rpm 9 kg
Synthetics
40 °C
60 °C - Cold
1200 rpm
1200 rpm - 400 rpm 4 kg
ENGLISH 29
AutoDose Others
Programme
AutoDose Detergent
AutoDose Fabric Softener
Spin
Intensive 1)
Prewash
Rinse Only
Extra Rinse
Time Save 2)
Delay Start
Eco 40-60
Cottons
Synthetics
Delicates
Wool/Silk
Anti-Allergy
20min 3kg
Outdoor
Easy Iron
Spin/Drain
1) This option is not available with temperature lower than 40 °C.
2) If you set the shortest duration, we recommend that you decrease the load size. It is possible to fully
load the appliance, however the washing results can be less satisfactory.
Suitable detergents for washing programmes
Programme Universal
powder1)
Liquid Uni‐
versal
Liquid for
coloureds
Delicates
woollens
Special
Eco 40-60 -- --
Cottons -- --
Synthetics -- --
Delicates -- -- --
Wool/Silk -- -- --
ENGLISH 31
Programme Universal
powder1)
Liquid Uni‐
versal
Liquid for
coloureds
Delicates
woollens
Special
Anti-Allergy -- --
20min 3kg -- -- --
Outdoor -- -- --
Easy Iron -- --
1) At temperature higher than 60 °C the use of powder detergent is recommended.
▲ = Recommended -- = Not recommended
10.2 Woolmark Apparel Care - Blue
The wool wash cycle of this machine has
been approved by The Woolmark Company
for the washing of wool garments labelled as
«hand wash» provided that the garments are
washed according to the instructions issued
by the manufacturer of this washing machine.
Follow the garment care label for drying and
other laundry instructions. M1512
The Woolmark symbol is a Certification mark
in many countries.
11. WI-FI - CONNECTIVITY SETUP
This chapter describes how to connect
the smart appliance to the Wi-Fi network
and to link it to mobile devices.
By this functionality you can receive
notifications, control and monitor your
appliance from your mobile devices.
To connect the appliance to enjoy the full
range of features and services you need:
Wireless network at home with
internet connection enabled.
Mobile device connected to wireless
network.
Frequency/
Protocol
Wi-Fi: 2.4 GHz / 802.11
bgn
Wi-Fi: 5 GHz / 802.11 an
(for indoor use only)
Bluetooth Low Energy
5.0: 2.4 GHz / DSSS
Max Power Wi-Fi 2.4 GHz: <20 dBm
Wi-Fi 5 GHz: <23 dBm
Bluetooth Low Energy
5.0: < 20 dBm
Encryption WPA, WPA2
www.aeg.com32
11.1 Installing and
configuring "My AEG"
"My AEG" allows you to
control your laundry through
a mobile device.
It contains a large number of
programmes, useful features
and product information
tailored perfectly to the
appliance.
Through the app you can
select the programmes
already available from the
appliance control panel, plus
unlock additional
programmes available only
from a mobile device
Additional programmes can
change over the time along
with new versions of the
app.
It's personalized laundry
care - all from your mobile
device.
When connecting the appliance to the
application, stand near it with your smart
device.
Make sure that your smart device is
connected to the wireless network.
1. Go to the App Store on your smart
device.
2. Download and install the App "My
AEG" .
3. Make sure you started a Wi-fi
connection in the appliance. If not,
read the next paragraph 'Configuring
the appliance wireless connection'.
4. Start the application. Select the
country and language and login with
Your email and password. If you do
not have an account, create a new
one following the instructions in "My
AEG" .
5. Follow the instructions on the App for
the appliance registration and
configuration.
11.2 Configuring the washing
machine wireless connection
1. Press and hold the On/Off button for
a few seconds to activate the
appliance. Wait about 10 seconds
before proceeding with wireless
configuration.
2. Press and hold the AutoDose Liquid
Detergent and the AutoDose
Fabric Softener buttons for a few
seconds simultaneously until a 'click'
sounds. Release the buttons.
appears on the display for 5 seconds
and the indicator starts blinking.
The wireless module begins starting up.
Make sure that you APP is
ready for connection.
3. After about 10 seconds,
(Access Point) appears on the
display.
The access point will be open for about 3
minutes.
As long as the appliance is
activated, it will keep trying
to connect with saved
credentials until the Wi-Fi is
deactivated or resets the
credentials.
4. Configure the "My AEG" app on your
smart device and follow the
instructions to connect the appliance
to your Wi-Fi network.
5. If the connectivity is configured, when
the programme information screen
returns, the indicator is on the
display.
ENGLISH 33
Every time you switch the
appliance on, the appliance
takes about 10 seconds to
connect to the network
automatically. When the
indicator stops blinking
the connection is ready.
To switch the wireless connection off,
press and hold the AutoDose Liquid
Detergent and the AutoDose Fabric
Softener buttons for a few seconds
simultaneously until the first acoustic
signal. Release the buttons.
appears on the display for 5 seconds.
If you switch the appliance
off and on again, the
wireless connection is
automatically off.
To remove the wireless credentials,
make sure that the Wi-Fi connection is
on. Press and hold the AutoDose Liquid
Detergent and the AutoDose Fabric
Softener buttons for at least 10
seconds simultaneously until the second
acoustic signal: appears on the
display.
11.3 Remote Start
The Remote Start enables you to start a
cycle in remote control.
The Remote Control
activates automatically when
you press the Start/Pause
button to start the
programme, but it is also
possible to start a washing
programme remotely. This
function is deactivates when
door is open.
When the App is installed and the
wireless connection is complete, you can
activate the Remote Start:
1. Touch the Remote button and the
indicator blinks on the display
for a few seconds.
2. Touch the Start/Pause button to
activate the Remote Start before the
indicator stops blinking.
The indicators and appear on the
programme summary screen and the
door is locked. Now it is possible to start
the programme remotely.
When touching the Start/
Pause button after the
indicator stops
blinking, the Remote Start is
not activated, but the set
programme starts.
To remove the Remote Start, tap on the
Remote button and confirm by
pressing the Start/Pause button.
11.4 Over-the-air update
The App may propose an update for your
appliance.
The update is accepted via App only.
If a programme is running, the App
notifies that the update will start at the
end of the programme.
During the update, the appliance shows
in the display.
Do not switch off or unplug the appliance
during update.
The appliance will usable again at the
end of the update, without any
notification about successful update.
www.aeg.com34
If an error occurs, the appliance shows
in the display: just press any
buttons or turn the knob to return to
normal use.
12. DAILY USE
WARNING!
Refer to Safety chapters.
12.1 Activating the appliance
1. Connect the mains plug to the mains
socket.
2. Open the water tap.
3. Press the On/Off button for a few
seconds to activate the appliance.
A short tune sounds (if activated). The
programme dial is automatically set on
the default programme.
The display shows the programme
duration, the maximum load (for a few
seconds only), the default temperature,
the default spin speed and the indicators
of the phases making up the programme.
12.2 Loading the laundry
1. Open the appliance door.
2. Shake the items before you put them
in the appliance.
3. Put the laundry in the drum, one item
at a time.
Make sure not to put too much laundry in
the drum.
4. Close the door firmly.
CAUTION!
Make sure that no laundry
stays between the seal and
the door. There is a risk of
water leakage or damage to
the laundry.
CAUTION!
Washing heavily oiled,
greasy stains could cause
damage rubber parts of the
washing machine.
12.3 Setting a programme
If you wish to change the
automatic detergent or fabric
softener dosage, enter the
AutoDose configuration
mode before proceeding
with any programme setting.
The configuration mode may
cancel temporary settings.
Please refer to "AutoDose
configuration mode"
paragraph in "The AutoDose
Technology (Autodosing)"
chapter.
1. Turn the programme dial to select the
desired washing programme. The
related programme indicator comes
on.
The indicator of the Start/Pause
button flashes.
The display shows an indicative
programme duration, the maximum
declared load for the set programme
(only for a few seconds), the default
temperature, the default spin speed and
the washing phase indicators (when
available).
2. To change the temperature and/or
the spin speed, touch the related
buttons.
3. If desired, set one or more options by
touching the related buttons. The
related indicators come on in the
ENGLISH 35
display and the given information
changes accordingly.
In case a selection is not
possible, no indicator
comes on and an acoustic
signal sounds.
12.4 Starting a programme
with the delay start
1. Touch the Delay Start button
repeatedly until the display shows the
desired delay time. The indicator
goes on.
2. Touch the Start/Pause button.
The appliance starts the countdown of
the delay start.
When the countdown is completed, the
programme starts.
The ProSense estimation
starts at the end of the
countdown.
Cancelling the delay start
after the countdown has
started
To cancel the delay start:
1. Touch the Start/Pause button to
pause the appliance. The related
indicator flashes.
2. Touch the Delay Start button
repeatedly until the display shows .
3. Touch the Start/Pause button again
to start the programme immediately.
Changing the delay start after
the countdown has started
To change the delay start:
1. Touch the Start/Pause button to
pause the appliance. The related
indicator flashes.
2. Touch the Delay Start button
repeatedly until the display shows the
desired delay time.
3. Touch the Start/Pause button again
to start the new countdown.
12.5 Starting a programme
WARNING!
Make sure that the detergent
dispenser is firmly closed,
otherwise programme won't
start.
Touch the Start/Pause button to start
the programme.
The related indicator stops flashing and
stays on.
In the display, the indicator of the
operating phase starts flashing.
The programme starts, the door is
locked. The display shows the indicator
.
The drain pump can operate
shortly before the appliance
fills water.
12.6 The ProSense load
detection
The programme duration in
the display is referred to a
medium/high load.
After touching the Start/Pause
button, the maximum declared load
indicator goes off, the indicator
flashes, the ProSense starts the laundry
load detection:
1. The appliance detects the load in the
first 30 seconds: the indicator
comes on and the indicator
flashes, the drum rotates shortly.
2. The appliance adjusts automatically
the programme duration to the load
to achieve perfect washing results in
the minimum possible time. The
programme duration could increase
or decrease.
At the end of the load detection, if
laundry load is below the maximum
declared weight for selected
programme, the display shows the
new programme duration. After
further 30 seconds, the water filling
starts.
www.aeg.com36
At the end of the load detection, in case
of drum overload, the indicator is
steady on and the indicator is
flashing in the display.
In this case, for 30 seconds, it is possible
to pause the appliance and remove the
exceeding garments.
Once removed the exceeding garments,
touch the Start/Pause button to start
the programme again. The ProSense
phase can be repeated up to three times
(see point 1).
Important! If the laundry amount will not
be reduced, the washing programme
starts anyway, despite the overload. In
this case, it will be not possible to
guarantee the best washing results.
About 20 minutes after the
programme start, the
programme duration could
be adjusted again depending
on the capacity of water
absorption of the fabrics.
The ProSense detection is
carried out with complete
washing programmes only
(no skipping phase
selected).
The ProSense is not
available with some
programmes, such as Wool/
Silk, Rinse, Spin and
programmes with short
cycles.
12.7 Programme phase
indicators
When the programme starts the indicator
of the running phase flashes and the
other phase indicators are steady on.
E.g. the washing or pre wash phase is
running: .
When the phase ends the relevant
indicator stops flashing and is steady on.
The next phase indicator starts flashing.
E.g. the rinse phase is running: .
12.8 Interrupting a
programme and changing the
options
When the programme is running, you
can change only some options:
1. Touch the Start/Pause button.
The related indicator flashes.
2. Change the options. The given
information in the display changes
accordingly.
3. Touch the Start/Pause button
again.
The washing programme continues.
12.9 Cancelling a running
programme
1. Press the On/Off button to cancel the
programme and to deactivate the
appliance.
2. Press the On/Off button again to
activate the appliance.
Now, you can set a new washing
programme.
If the ProSense phase is
already carried out and the
water filling is already
started, the new programme
starts without repeating the
ProSense phase. The water
and the detergent are not
drained out in order to avoid
waste. The display shows
the maximum duration of the
programme, updating it
about 20 minutes after the
starting of the new
programme.
12.10 Opening the door -
Adding garments
While a programme or the delay start
operates, the appliance door is locked.
If the temperature and level
of the water in the drum are
too high and/or the drum still
rotates you cannot open the
door.
ENGLISH 37
1. Touch the Start/Pause button.
In the display the related door lock
indicator goes off.
2. Open the appliance door. If
necessary, add or remove the items.
3. Close the door and touch the Start/
Pause button.
The programme or the delay start
continues.
4. The door can be opened when the
programme is complete. You may
also set a spinning or draining
programme/option and than press
Start/Pause button. If the spin
and drain programmes are not
available in the programme dial, they
can be set via App.
12.11 End of the programme
When the programme has finished, the
appliance stops automatically. The
acoustic signals operate (if they are
active).
In the display all washing phase
indicators become steady and the time
area shows .
The indicator of the Start/Pause
button goes off.
The door unlocks and the indicator
goes off.
1. Press the On/Off button to deactivate
the appliance.
After five minutes from the end of the
programme, the energy saving function
automatically deactivates the appliance.
When you activate the
appliance again, the display
show the end of the last
selected programme. Turn
the programme dial to set a
new cycle.
2. Remove the laundry from the
appliance.
3. Make sure that the drum is empty.
4. Keep the door and the detergent
dispenser slightly ajar to prevent
mildew and odours.
5. Close the water tap.
12.12 Draining water out after
end of cycle
If you have chosen a programme or an
option that does not empty out the water
of the last rinse, the programme is
completed, but:
The display shows the indicator , the
option indicator or and the
door locked indicator . The
indicator of the running phase
flashes.
The drum still turns at regular
intervals to prevent the creases in the
laundry.
The door stays locked.
You must drain the water to open the
door:
1. If necessary, touch the Spin button to
decrease the spin speed proposed
by the appliance.
2. Touch the Start/Pause button:
If you have set , the appliance
drains the water and spins.
If you have set , the appliance
only drains the water.
The option indicator or goes off,
while the indicator flashes and then
goes off.
3. When the programme is completed
and the door locked indicator
goes off, you can open the door.
4. Press the On/Off button a few
seconds to deactivate the appliance.
In any case, the appliance
empties the water out
automatically after
approximately 18 hours.
12.13 Stand-by option
The Stand-by function automatically
deactivates the appliance to decrease
the energy consumption when:
You do not use the appliance for 5
minutes before you touch the Start/
Pause button.
Press the On/Off button to activate
the appliance again.
www.aeg.com38
After 5 minutes from the end of the
washing programme
Press the On/Off button to activate
the appliance again.
The display shows the end of the last
set programme.
Turn the programme dial to set a new
cycle.
If you set a programme or an
option that ends with water
in the drum, the Stand-by
function doesn't deactivate
the appliance to remind you
to drain the water.
13. HINTS AND TIPS
WARNING!
Refer to Safety chapters.
13.1 The laundry load
Divide the laundry into: white,
coloured, synthetics, delicates and
wool.
Follow the washing instructions on the
laundry care labels.
Do not wash white and coloured items
together.
Some coloured items can discolour
with the first wash. We recommend
that you wash them separately for the
first couple of times.
Turn multilayered fabrics, wool and
items with printed illustrations inside
out.
Pre-treat stubborn stains.
Wash stubborn stains with a special
detergent.
Be careful with curtains. Remove the
hooks and put the curtains in a
washing bag or pillowcase.
A very small load can cause balance
problems with the spin phase leading
to excessive vibration. If this occurs:
a. interrupt the programme and
open the door (refer to "Daily
Use" chapter);
b. manually redistribute the load so
that the items are spaced evenly
around the tub;
c. press the Start/Pause button.
The spin phase continues.
Button up pillowcases, close zippers,
hooks and poppers. Tie up belts,
cords, shoelaces, ribbons and any
other loose elements.
Do not wash laundry without hems or
with cuts. Use a washing bag to wash
small and/or delicate items (e.g.
underwired bras, belts, tights,
shoelaces, ribbons, etc. ).
Empty pockets and unfold the items.
13.2 Stubborn stains
For some stains, water and detergent is
not sufficient.
We recommend that you pre-treat these
stains before you put the items in the
appliance.
Special stain removers are available.
Use the special stain remover that is
applicable to the type of stain and fabric.
13.3 Detergent type and
quantity
The choice of detergent and use of
correct quantities not only affects your
wash performance, but also helps to
avoid waste and protect the environment:
Use only detergents and other
treatments specially made for
ENGLISH 39
washing machines. First, follow these
generic rules:
powder detergents for all types of
fabric, excluding delicate. Prefer
powder detergents containing
bleach for whites and laundry
sanitization,
liquid detergents, preferably for
low temperature wash
programmes (60 °C max) for all
types of fabric, or special ones for
woollens only.
The choice and quantity of detergent
will depend on: type of fabric
(delicates, woollens, cottons, etc), the
colour of clothes, size of the load,
degree of soiling, wash temperature
and hardness of the water used.
Follow the instructions that you find
on packaging of the detergents or
other treatments without exceeding
the indicated maximum level ( ).
Do not mix different types of
detergents.
Use less detergent if:
you are washing a small load,
the laundry is lightly soiled,
there is large amounts of foam
during washing.
When using detergent tabs or pods,
always put them inside the drum, not
in the detergent dispenser.
Insufficient detergent may cause:
unsatisfactory washing results,
the wash load to turn grey,
greasy clothes,
mould in the appliance.
Excessive detergent may cause:
sudsing,
reduced washing effect,
inadequate rinsing,
a greater impact for the environment.
13.4 Ecological hints
To save water, energy and to help
protect the environment, we recommend
that you follow these tips:
Normally soiled laundry may be
washed without prewash in order to
save detergent, water and time (the
environment is protected too!).
Loading the appliance to the
maximum capacity indicated for
each programmes helps to reduce
energy and water consumption.
With adequate pre-treatment, stains
and limited soiling can be removed;
the laundry can then be washed at a
lower temperature.
To use the correct quantity of
detergent, refer to the quantity
suggested by the detergent producer
and check the water hardness of you
domestic system. Refer to 'Water
hardness'.
Set the maximum possible spin
speed for the selected washing
programme before drying your
laundry in a tumble dryer. This will
save energy during drying!
13.5 Water hardness
If the water hardness in your area is high
or moderate, we recommend that you
additive for water softening. In areas
where the water hardness is soft it is not
necessary to use him.
To find out the water hardness in your
area, contact your local water authority.
Use the correct quantity of additive for
water softening. Follow the instructions
that you find on the packaging of the
product.
14. CARE AND CLEANING
WARNING!
Refer to Safety chapters.
14.1 Periodic cleaning
schedule
Periodic cleaning helps to extend the
life of your appliance.
After each cycle, keep the door and the
detergent dispenser slightly ajar to get air
circulation and dry the humidity inside
the appliance: this will prevent mildew
and odours.
If the appliance is not used for a long
time: close the water tap and unplug the
appliance.
www.aeg.com40
Indicative periodic cleaning schedule:
Descaling Twice a year
Maintenance wash Once a month
Clean door seal Every two months
Clean drum Every two months
Clean detergent dis‐
penser and Auto‐
Dose tanks
Twice a year
Clean drain pump
filter
Twice a year
Clean the inlet hose
and the valve filter
Twice a year
The following paragraphs explain how
you should clean each part.
14.2 Removing foreign
objects
Make sure that pockets are
empty and all loose
elements are tied up before
running your cycle. Refer to
'The laundry load' in 'Hints
and tips'.
Remove any foreign objects (such as
metal clip, buttons, coins, etc) that you
may find in the door seal, the filters and
the drum. Refer to 'Door seal with double
lip trap', 'Cleaning the drum', 'Cleaning
the drain pump' and 'Cleaning the inlet
hose and the valve filter' paragraphs. If
necessary, please contact the Authorised
Service Centre.
14.3 External cleaning
Clean the appliance with mild soap and
warm water only. Fully dry all the
surfaces.
Do not use a scouring pads or any
scratching material.
CAUTION!
Do not use alcohol, solvents
or chemical products.
CAUTION!
Do not clean the metal
surfaces with chlorine-based
detergent.
14.4 Descaling
If the water hardness in your
area is high or moderate, we
recommend that you use a
water descaling product for
washing machines.
Regularly examine the drum to check for
limescale.
The regular detergents already contain
water softening agents, but we
recommend to run a cycle with empty
drum and a descaling product
occasionally.
Always follow the
instructions that you find on
the packaging of the
product.
14.5 Maintenance wash
The repeated and prolonged use of low
temperature and short programmes can
cause detergent deposits, fluff residues,
bacterial growth and biofilm formation
inside the drum and the tub. This could
generate bad odours and mildew.
To eliminate these deposits and
hygienize the inner part of the appliance,
run a maintenance wash at least once a
month:
1. Remove all laundry from the drum.
2. Deactivate AutoDose function for
detergent and softener.
3. Add manually small quantity of
powder detergent or a specific
product and run a cotton programme
with the highest temperature.
14.6 Door seal
This appliance is designed with a self
cleaning draining system, allowing light
fluff fibers that fall off the clothes to be
drained out with the water. Regularly
examine the seal. Coins, buttons, other
small items can be recovered at the end
of the cycle.
ENGLISH 41
Clean it when needed, using ammonia
cream cleanser agent without scratching
the seal surface.
Always obey the instructions
that you find on the
packaging of the product.
14.7 Cleaning the drum
Regularly examine the drum to prevent
unwanted deposits.
Rust deposits in the drum may occur due
to rusting foreign body in the washing or
tap water containing iron
Clean the drum with special products for
stainless steel.
Always follow the
instructions that you find on
the packaging of the
product.
Do not clean the drum with
acidic descaling products,
scouring products containing
chlorine or iron or steel wool.
For a thorough clean:
1. Remove all laundry from the drum.
2. Deactivate AutoDose function for
detergent and softener.
3. Run a Cottons programme with the
highest temperature.
4. Add a manually small quantity of
powder detergent or a specific
product into the empty drum, in order
to rinse out any left residues.
Occasionally, at the end of a
cycle the display may show
the icon : this is a
recommendation to perform
the “drum cleaning”. Once
the drum cleaning has been
performed, the icon
disappears.
14.8 Cleaning the detergent
dispenser and the AutoDose
tanks
CAUTION!
Do not change brand or
type of detergent, fabric
softener or additives
inside the tanks without
cleaning both tanks
before.
Before cleaning, make sure
that the all compartments
are empty.
To prevent possible deposits of dried
detergent, clotted fabric softener,
formation of mould in the detergent
dispenser and/or clotted liquid additives
in the AutoDose tanks, once in a while
carry out the following cleaning
procedure:
1. Open the detergent dispenser. Press
the catch as indicated in the picture
and pull the detergent dispenser out.
2. Remove the insert for the softener
and, if inserted, the container for
liquid detergent.
www.aeg.com42
3. Open the drain plugs of each tank
and empty them into a sink.
4. Press the catch on the back as
indicated in the picture and lift up the
top cover to remove it.
5. Wash the drawer and all inserts
under running water.
CAUTION!
Do not use sharp or metal
brushes and sponges.
6. Turn the dispenser up side down and
open the bottom cover as indicated in
the picture.
7. Make sure that all detergent residue
is removed from the conveyor. Use
only soft damp clothes.
8. Put bottom cover back to its position
by aligning its holes on drawer hooks
as indicated in the picture. Close it till
"click" sound.
ENGLISH 43
CAUTION!
Press the bottom cover as
indicated in the picture.
Make sure that it is closed
properly.
WARNING!
Do not clean with any
sharp and metal brushes
ora any tools, pumps or
sensors allocated on the
back of the detergent
drawer. If necessary, use
only soft damp clothes.
WARNING!
If some residues remain on
the back area of tanks, soak
detergent drawer in a warm
water. Do not use tools to
clean it. Before soaking,
remove the handle by
pressing red button and slide
the handle as indicated in
the picture.
9. Make sure that all detergent residue
is removed from the upper and lower
part of the recess. Use a small brush
to clean the recess.
10. Reassembly the drawer as follows:
a. Place the handle if was
disassembled.
www.aeg.com44
b. Place the bottom cover and
press till "click" sound.
c. Place the top cover on the tanks
compartment and press till "click"
sound.
d. Replace components on manual
compartment.
11. Insert the detergent dispenser into
the guide rails and gently close it till
"click" sound. Run the rinsing
programme without any clothes in the
drum.
To restore the functionality,
refill tanks with detergent
and softener. If you place a
wrong additives in the tanks,
you can easily recover it by
using the drain plug on both
side of the drawer. Before
opening drain plugs ensure
to place below the drawer a
basin or suitable containers
to collect the liquid. Ensure
to properly close the plugs
before refilling.
14.9 Cleaning the drain pump
WARNING!
Disconnect the mains plug
from the mains socket.
Regularly check the drain
pump filter and make sure
that it is clean.
Clean the drain pump if:
The appliance does not drain the
water.
The drum does not turn.
The appliance makes an unusual
noise because of the blockage of the
drain pump.
The display shows the alarm code
.
WARNING!
Do not remove the filter
while the appliance
operates.
Do not clean the pump if
the water in the appliance
is hot. Wait until the water
cools down
Proceed as follows to clean the pump:
1. Open the pump cover.
1
2
2. Place a suitable bowl below the drain
pump access to collect the water that
flows out.
3. Open the chute downwards. Always
keep a rag nearby to dry up any
water spillages when removing the
filter.
ENGLISH 45
4. Turn the filter 180 degrees in anti-
clockwise direction to open it, without
removing. Let the water flow out.
5. When the bowl is full of water, turn
the filter back and empty the
container.
6. Repeat the steps 4 and 5 until the
water stops to flow out.
7. Turn the filter anti-clockwise to
remove it.
1
2
8. If it is necessary, remove fluff and
objects from the filter recess.
9. Make sure that the impeller of the
pump can rotate. If it does not rotate,
contact the Authorised Service
Centre.
10. Clean the filter under the water tap.
11. Put the filter back into the special
guides by turning it clockwise. Make
sure that you tighten the filter
correctly to prevent leakages.
2
1
12. Close the pump cover.
www.aeg.com46
2
1
When you drain the water with the
emergency drain procedure, you must
activate the drain system again:
a. Put 2 litres of water in the main
wash compartment of the
detergent dispenser.
b. Start the programme to drain the
water.
14.10 Cleaning the inlet hose
and the valve filter
It is recommended to clean both the
filters of the inlet hose and valve
occasionally to remove any deposit,
collected over the time:
1. Remove the inlet hose from the tap
and clean the filter.
1
2
3
2. Remove the inlet hose from the
appliance by loosening the ring nut.
3. Clean the valve filter on the back of
the appliance with a toothbrush.
4. When you reconnect the hose to the
back of the appliance, turn it left or
right (not in vertical position)
depending on the position of your
water tap.
45°
20°
14.11 Emergency drain
If the appliance cannot drain the water,
carry out the same procedure, described
in 'Cleaning the drain pump' paragraph. If
necessary, clean the pump.
When you drain the water with the
emergency drain procedure, you must
activate the drain system again:
ENGLISH 47
1. Put 2 litres of water in the main wash
compartment of the detergent
dispenser.
2. Start the programme to drain the
water.
14.12 Frost precautions
If the appliance is installed in an area
where the temperature can reach the
values around 0° C or drop below,
remove the remaining water from the
inlet hose and the drain pump.
1. Disconnect the mains plug from the
mains socket.
2. Close the water tap.
3. Put the two ends of the inlet hose in
a container and let the water flow out
of the hose.
4. Empty the drain pump. Refer to the
emergency drain procedure.
5. When the drain pump is empty,
install the inlet hose again.
WARNING!
Make sure that the
temperature is higher than
0 °C before you use the
appliance again.
The manufacturer is not
responsible for damages
caused by low temperatures.
15. TROUBLESHOOTING
WARNING!
Refer to Safety chapters.
15.1 Alarm Codes and Possible failures
The appliance does not start or it stops during operation. First try to find a solution to the
problem (refer to the tables).
WARNING!
Deactivate the appliance before carrying out any check.
With some problems, the display shows an alarm code and the
Start/Pause button may flash continuously:
Problem Possible solution
The appliance does
not fill with water prop‐
erly.
Make sure that the water tap is open.
Make sure that the pressure of the water supply is not too low.
For this information, contact your local water authority.
Make sure that the water tap is not clogged.
Make sure that the inlet hose has no kinks, damages or
bends.
Make sure that the connection of the water inlet hose is cor‐
rect.
Make sure that the filter of the inlet hose and the filter of the
valve are not clogged. Refer to 'Care and cleaning'.
www.aeg.com48
The appliance does
not drain the water.
Make sure that the sink spigot is not clogged.
Make sure that the drain hose has no kinks or bends.
Make sure that the drain filter is not clogged. Clean the filter, if
necessary. Refer to "Care and cleaning".
Make sure that the connection of the drain hose is correct.
Set the drain programme if you set a programme without drain
phase. If the drain programme is not available in the pro‐
gramme dial, it can be set via App.
Set the drain programme if you set an option which ends with
water in the tub.
The appliance door is
open or not closed
correctly.
Make sure that the door is properly closed.
Internal fail. No com‐
munication between
electronic elements of
the appliance.
The programme was not finished properly or the appliance
stopped too early. Switch the appliance off and on again.
If the alarm code appears again, contact the Authorised Serv‐
ice Centre.
: Frequency of power supply is out of range.
: Supply voltage is too high.
: Supply voltage is too low.
The anti-flood device
is on.
Disconnect the appliance and close the water tap. Contact the
Authorised Service Centre.
If the display shows other alarm codes, deactivate and activate the
appliance. If the problem continues, contact the Authorised Service
Centre.
In case of different problem with the washing machine check the
table below for possible solutions.
Problem Possible solution
The programme does
not start.
Make sure that the mains plug is connected to the mains
socket.
Make sure that the appliance door is closed.
Make sure that there is no damaged fuse in the fuse box.
Make sure that the Start/Pause has been touched.
If the delay start is set, cancel the setting or wait for the end of
countdown.
Make sure that the detergent dispenser is firmly closed.
Deactivate the Child Lock function if it is on.
Check the position of the knob on the selected programme.
ENGLISH 49
Problem Possible solution
The appliance fills with
water and drains im‐
mediately.
Make sure that the drain hose is in the correct position. The
hose may be positioned too low. Refer to "Installation instruc‐
tion".
The spin phase does
not operate or the
washing cycle lasts
longer than usual.
Set the spin programme. If the drain programme is not availa‐
ble in the programme dial, it can be set via App’.
Make sure that the drain filter is not clogged. Clean the filter, if
necessary. Refer to "Care and cleaning".
Adjust manually the items in the tub and start the spin phase
again. This problem may be caused by balance problems.
There is water on the
floor.
Make sure that the couplings of the water hoses are tight and
there is not water leakages.
Make sure that the water inlet hose and the drain hose have
no damages.
Make sure you use the correct detergent and the correct
quantity of it.
You cannot open the
appliance door.
Make sure that a washing programme that ends with water in
tub, has not been selected.
Make sure that the washing programme is finished.
Set the drain or the spin programme if there is water in the
drum. If the spin and drain programmes are not available in
the programme dial, they can be set via App.
Make sure that the appliance receives electrical power.
This problem may be caused by a failure of the appliance.
Contact the Authorised Service Centre.
Make sure that the x is not activated. Deactivate it.
The display does not
show the wireless indi‐
cator .
Check the wireless signal.
Make sure that the wireless connection is on. Refer to para‐
graph "Configuring the washing machine wireless connection"
in "Wi-Fi - Connectivity setup" chapter.
Check your home network and router.
Restart the router.
Contact your wireless service provider if there are further
problems with the wireless network.
The App cannot con‐
nect to the appliance.
Check the wireless signal.
Check if your smart device is connected to the wireless net‐
work.
Check your home network and router.
Restart the router.
Contact your wireless service provider if there are problems
with the wireless network.
The appliance, the smart device, or both, need to be config‐
ured again because a new router has been installed or the
router configuration has been changed.
www.aeg.com50
Problem Possible solution
The App cannot fre‐
quently connect to the
appliance.
Make sure that the wireless signal reaches the appliance. Try
to move the home router as near the appliance as possible or
consider purchasing a wireless range extender.
Make sure the wireless signal is not disrupted by microwave.
Turn the microwave off. Avoid using the microwave and the
remote control at the same time.
The display shows
. All buttons are
inactive, except the the
On/Off .
The appliance is downloading any available updates. Wait un‐
til the update process is complete. If you deactivate the appli‐
ance during update, it resumes when you activate the appli‐
ance again.
The appliance makes
an unusual noise and
vibrates.
Make sure the levelling of the appliance is correct. Refer to
"Installation instruction".
Make sure that the packaging and/or the transit bolts are re‐
moved. Refer to "Installation instruction".
Add more laundry in the drum. The load may be too small.
The programme dura‐
tion increases or de‐
creases during pro‐
gramme execution.
The ProSense System is able to adjust the programme dura‐
tion according to the type and the laundry load size. Refer to
"The ProSense System load detection" in "Daily Use" chapter.
The washing results
are not satisfactory.
Increase the detergent quantity or use a different detergent.
Use special products to remove the stubborn stains before
you wash the laundry.
Make sure that you set the correct temperature.
Decrease the laundry load.
When using AutoDose tanks, make sure that they are not
empty.
When using AutoDose tanks, verify the pre-set detergent/
fabric softener dosage. Refer to "Basic setting" paragraph in
"The AutoDose Technology" chapter.
Make sure that you have cleaned the AutoDose tanks before
using different brand and type of detergent, fabric softener or
other additives.
Too much foam in the
drum during the wash‐
ing cycle.
Reduce the quantity of detergent.
When using AutoDose tanks, verify the pre-set detergent/
fabric softener dosage. Refer to "Basic setting" paragraph in
"The AutoDose Technology" chapter.
The detergent/fabric
softener level does not
decrease in the Auto‐
Dose tanks after wash‐
ing.
This is normal: tanks are quite large and detergent consump‐
tion may be not so evident.
After the washing cy‐
cle, there are some
detergent residues in
the dispenser drawer.
Make sure that the flap is in the correct position (UP for pow‐
der detergent - DOWN for liquid detergent).
Make sure you have used the detergent dispenser according
the indications given in this user manual.
ENGLISH 51
After the check, activate the appliance. The programme continues
from the point of interruption.
If the problem occurs again, contact the Authorised Service Centre.
The necessary data for the service centre are on the rating plate.
16. CONSUMPTION VALUES
16.1 Introduction
See the web link www.theenergylabel.eu for
detailed information about Energy Label.
The QR code on the energy label supplied with the
appliance provides a web link to the information
related to the performance of the appliance in the
EU EPREL database. Keep the energy label for
reference together with the user manual and all
other documents provided with this appliance.
It is also possible to find the same information in
EPREL using the link https://eprel.ec.europa.eu
and the model name and product number that you
find on the rating plate of the appliance. Refer to
'Product description' chapter for the position of the
rating plate.
16.2 Legend
kg Laundry load. h:mm Programme duration.
kWh Energy consumption. °C Temperature in the laundry.
Litres Water consumption. rpm Spin speed.
%Remaining moisture at the end of spinning phase. The higher is the spin speed,
the higher is the noise and the lower is the remaining moisture.
Values and programme duration may differ depending on different
conditions (e.g. room temperature, water temperature and pressure, load
size and type of laundry, supply voltage) and also if you change the
default setting of a programme.
www.aeg.com52
16.3 According to
Commission Regulation Eu
2019/2023
Eco 40-60 pro‐
gramme kg kWh Litres h:mm % °C rpm1)
Full load 9 0.760 64 3:40 53 33 1351
Half load 4,5 0.440 47 2:45 53 27 1351
Quarter load 2,5 0.300 39 2:35 54 26 1351
1) Maximum spin speed.
Power consumption in different modes
Off (W) Stand-by (W) Delay start
(W)
Networked
standby (W)
0.50 0.50 4.00 2.001)
Time to Off/Standby mode is 15 minutes maximum.
1) The energy consumption of the connected function is approximately 17.5 kWh per year. To disconnect
this function, please refer to the chapter 'Wi-fi - Connectivity setup'.
16.4 Common programmes
These values are indicative only.
Programme kg kWh Litres h:mm % °C rpm1)
Cottons2)
95°C 9 2.75 85 4:00 52 85 1400
Cottons
60°C 9 1.65 80 3:30 52 55 1400
Cottons3)
20°C 9 0.35 80 3:00 52 20 1400
Synthetics
40°C 4 0.85 75 2:30 35 40 1200
Delicates4)
30°C 2 0.35 60 1:25 35 30 1200
ENGLISH 53
Programme kg kWh Litres h:mm % °C rpm1)
Wool/Silk
30°C 1,5 0.30 70 1:05 30 30 1200
1) Reference indicator of the spin speed.
2) Suitable for washing heavily soiled textiles.
3) Suitable for washing lightly soiled cottons, synthetic and mixed fabrics.
4) It also performs as quick washing cycle for lightly soiled laundry.
17. QUICK GUIDE
17.1 Daily use
12
1
2
3
Connect the mains plug to the mains
socket.
Open the water tap.
Load the laundry.
Pour the detergent and other treatment
in the proper compartment of the
detergent dispenser.
1. Push the On/Off button to turn the
appliance on. Turn the programme
dial to set the desired programme.
2. Set the desired options (1) by means
of the corresponding touch buttons.
To start the programme, touch the
Start/Pause (2) button.
3. The appliance starts.
At the end of the programme, remove the
laundry.
Push the On/Off button to turn the
appliance off.
17.2 Cleaning the drain pump filter
1 32
180˚
2
1
Clean the filter regularly and, especially,
if the alarm code appears on the
display.
www.aeg.com54
17.3 Programmes
Programmes Load Product description
Eco 40-60 9 kg White and coloured cottons. Normally soiled
garments.
Cottons 9 kg White cotton and coloured cotton.
Synthetics 4 kg Synthetic items or mixed fabric items.
Delicates 2 kg Delicate fabrics such as acrylics, viscose, poly‐
ester items.
Wool/Silk 1,5 kg Machine washable wool, hand washable wool
and delicates.
Anti-Allergy 9 kg
White cotton items. This program removes more
than 99,99% of bacteria and viruses1). It also
ensure a proper reduction of allergens.
20min 3kg 3 kg Cotton and synthetic lightly soiled items or once
worn items.
Outdoor 2,5 kg 2)
1 kg 3) Modern outdoor sporting garments.
Easy Iron 4 kg Synthetic items requiring a gentle wash.
Spin/Drain 9 kg
All fabrics, except woollens and very delicate
fabrics. Programme for spinning and draining
the water.
1) Tested for Staphylococcus aureus, Enterococcus faecium, Candida albicans, Pseudomonas aerugino‐
sa and MS2 Bacteriophage in external test performed by Swissatest Testmaterialien AG in 2021 (Test
Report No. 202120117).
2) Washing programme.
3) Washing programme and waterproofing phase.
18. ENVIRONMENTAL CONCERNS
Recycle materials with the symbol .
Put the packaging in relevant containers
to recycle it. Help protect the
environment and human health by
recycling waste of electrical and
electronic appliances. Do not dispose of
appliances marked with the symbol
with the household waste. Return the
product to your local recycling facility or
contact your municipal office.
*
ENGLISH 55
My AEG Care app
The software in this product contains components that are based on free and open source software. AEG gratefully
acknowledges the contributions of the open software and robotics communities to the development project.
To access the source code of these free and open source software components whose license conditions require
publishing, and to see their full copyright information and applicable license terms, please visit:
http://aeg.opensoftwarerepository.com (folder NIU5)
www.aeg.com/shop
135989230-A-272021
50

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw AEG L6FBG941CA bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van AEG L6FBG941CA in de taal/talen: Engels als bijlage per email.

De handleiding is 1.86 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info