464431
9
Verklein
Vergroot
Pagina terug
1/20
Pagina verder
9
© 2018 OJ Electronics A/S
Model FRTD 903 (S) English
OK
Backlight
ECO
Display illumination
There are three settings for the display back-
lighting:
Auto: Backlighting is activated whenever a
key is pressed and goes out automatically
30 seconds after the last key press.
On: Backlighting continuously on.
Heating active: Backlighting comes on when heat is called for by
the thermostat.
Select the desired backlighting setting and confirm with OK.
OK
Sensor
Selecting the sensor
Floor sensors other than the supplied FRTD
(12 kΩ/ 25°C) can be selected with this
menu. The thermostat is preprogrammed for
4 other types:
Sensor 2 kΩ
Sensor 10 kΩ
Sensor 15 kΩ
Sensor 33 kΩ
Select the installed sensor with the arrow keys, then confirm with
OK. The resistance characteristics of the sensor for 15°C, 20°C,
25C and 30°C are now displayed.
If the installed sensor does not have the same characteristic as
that shown in the thermostat display, change the values at the four
listed temperatures using the arrow keys.
Confirm with OK to switch to the next resistance characteristic.
Select Information with the arrow keys, then confirm with OK.
The display now shows the resistance characteristic of the selected
sensor. Then confirm with OK. The new sensor values are now
stored in the thermostat.
NB! If the incorrect sensor is selected there is a risk that the ther-
mostat will not be able to regulate to the desired temperatures and
therefore damage to the floor construction or covering may occur.
OK
Language
Language
Allows the language used on the display to
be changed.
Press OK and select the required language.
Confirm with OK.
OK
Factory reset
Factory reset
Allows factory settings to be restored. Your
personal settings will be lost, see Factory
settings.
Press OK and choose Reset in the menu.
Confirm with OK.
OK
Information
Information
Displays the thermostat software version.
EN50559
This thermostat complies with EN 50559
(VDE 0705-559) for electrical floor heating.
The regulation applies to electrical floor
heating, with a maximum floor weight of 4
kN/m². To ensure that hotspots due to unintentionally covering up
the surface are avoided, the heating function can be time-limited as
per EN/DIN.
Note that this function is not applicable to other heating applications
such as wall and/or ceiling heating
OK
EN50559
If it can be foreseen in advance that unintentional covering up of a
floor might occur, then it is important to assess the correct period of
time for which the floor heating must be time-limited.
The heating can be limited using a set number between 0 - 15 mi-
nutes per hour. The factory setting is 0 minutes.
Back
In various parts of the menus and submenus you will find the Back
menu item.
Use Back to return to the last step.
Exit
Returns to initial dispay.
Error messages
If a fault or error occurs, the thermostat will display an error code as
follows:
E0: Internal failure. The thermostat is defective. Replace thermostat.
E1: Internal sensor defective or short-circuited.
E2: External sensor defective or short-circuited.
E5: Internal overheating. Inspect the installation.
Factory settings
Preset schedule
Day 1-5
Event Time With floor sensor With room sensor
Day 06:00-08:00 25°C 20°C
Out 08:00-16:00 18°C 13°C
Home 16:00-23:00 25°C 20°C
Night 23:00-06:00 18°C 13°C
Day 6-7
Event Time With floor sensor With room sensor
Day 08:00-23:00 25°C 20°C
Night 23:00-08:00 18°C 13°C
9

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

AEG-FRTD-903

Zoeken resetten

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw AEG FRTD 903 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van AEG FRTD 903 in de taal/talen: Engels, Frans als bijlage per email.

De handleiding is 15.97 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van AEG FRTD 903

AEG FRTD 903 Gebruiksaanwijzing - Deutsch - 5 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info