Operating instructions
10
NOTE: if the drying results are not satisfactory it is possible to activate
only the dosage of rinse aid.
The activation/deactivation of the dosage of rinse aid can only be
possible with the 3 in 1 fuction active.
Activation/deactivation of the dosage of rinse aid
(The dishwasher must be switched off)
When the dosage of rinse aid has been activated, also the rinse
aid indicator light on the control panel is automatically activated.
1. Press the On/Off button. All programme selection buttons indicator
lights will illuminate (setting mode).
If only one programme selection button indicator light is
illuminated, this means that a washing programme has been set.
The programme must be cancelled: press simultaneously the
function buttons 2 and 3 for about 2 seconds, the indicator light
of the set programme button starts flashing for about 2 seconds.
After about 2 seconds the indicator lights of all the programme
selection buttons will illuminate indicating that the set programme
has been cancelled and that the machine is now in setting mode.
2. Press simultaneously function buttons 2 and 3, until the indicator
lights of the function buttons 1, 2 and 3 start flashing.
3. Press the function button 2, the indicator lights of function
buttons 1 and 3 turn off while the indicator light of the function
button 2 goes on flashing, the digital display indicates the current
setting.
4. To change the setting, press the function button 2 again, the
digital display indicates the new setting.
5. To memorise the operation, switch off the dishwasher by pressing
the On/Off button or wait about 60 seconds after which the
dishwasher will automatically return to setting mode.
Rinse aid dosage deactivated
Rinse aid dosage activated
