26
Your appliance needs air
Air flows in from under the door,
at the front, and flows out
upwards, over the back. For cor-
rect air circulation, it is important
that the ventilation openings are
not covered or obstructed.
Important! If the appliance is
positioned under a kitchen wall
unit, a minimum clearance of 10
cm must be left between the top
of the appliance and the
overhanging wall unit.
Rear spacers
In the bag with the documentation,
there are two spacers which must be
fitted in the two top corners. Fit the
spacers into the holes, taking care to
ensure that the arrow (A) is positio-
ned as shown in figure. Then turn
them through 45° (arrow (A) vertical)
until they lock into place.
Rehingeing the door
The side at which the door opens can
be changed from the right side (fac-
tory adjustment) to the left side, if
the installation site requires.
Warning! When changing the side at
which the door opens, the appliance
may not be connected to the mains.
Remove plug from the mains before
hand.
Proceed as follow:
1. Remove the clip-in ventilation grille
(D).
2. Remove the bottom hinge (E) by
unscrewing the two fixing screws.
